mbox series

[0/6] media: qcom: camss: Add sc8280xp support

Message ID 20231102-b4-camss-sc8280xp-v1-0-9996f4bcb8f4@linaro.org
Headers show
Series media: qcom: camss: Add sc8280xp support | expand

Message

Bryan O'Donoghue Nov. 2, 2023, 11:41 a.m. UTC
sc8280xp is the SoC found in the Lenovo X13s. This series adds support to
bring up the CSIPHY, CSID, VFE/RDI interfaces.

A number of precursor patches make this series smaller overall than
previous series.

sc8280xp provides

- 4 x VFE, 4 RDI per VFE
- 4 x VFE Lite, 4 RDI per VFE
- 4 x CSID
- 4 x CSID Lite
- 4 x CSI PHY

I've taken the yaml from a dtsi series and included it here since 1) I sent
the yaml to the wrong person and 2) it already has RB from Krzysztof.

Requires CAMCC for sc8280xp which applies to qcom/clk-for-6.7:
https://lore.kernel.org/linux-arm-msm/20231026105345.3376-1-bryan.odonoghue@linaro.org/
b4 shazam 20231026105345.3376-1-bryan.odonoghue@linaro.org

Requires the named power-domain patches which apply to media-tree/* :
https://lore.kernel.org/linux-arm-msm/20231101-b4-camss-named-power-domains-v3-5-bbdf5f22462a@linaro.org/
b4 shazam 20231101-b4-camss-named-power-domains-v3-5-bbdf5f22462a@linaro.org

To use the camera on x13s with say Google Hangouts or Microsoft Teams you
will need to

1. Run Firefox
2. Update about:config to enable pipewire
3. Use this WIP version of libcamera
   https://gitlab.freedesktop.org/camera/libcamera-softisp

A working bootable tree can be found here:
Link: https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/lenovo-x13s-linux-6.5.y

b4 base:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/b4/camss-sc8280xp

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
Bryan O'Donoghue (6):
      media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
      media: qcom: camss: Add CAMSS_SC8280XP enum
      media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init
      media: qcom: camss: Add sc8280xp resource details
      media: qcom: camss: Add sc8280xp support
      media: qcom: camss: vfe-17x: Rename camss-vfe-170 to camss-vfe-17x

 .../bindings/media/qcom,sc8280xp-camss.yaml        | 581 +++++++++++++++++++++
 drivers/media/platform/qcom/camss/Makefile         |   2 +-
 .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 108 +++-
 drivers/media/platform/qcom/camss/camss-csiphy.c   |   1 +
 .../camss/{camss-vfe-170.c => camss-vfe-17x.c}     |   0
 drivers/media/platform/qcom/camss/camss-vfe.c      |  25 +-
 drivers/media/platform/qcom/camss/camss-video.c    |   1 +
 drivers/media/platform/qcom/camss/camss.c          | 376 +++++++++++++
 drivers/media/platform/qcom/camss/camss.h          |   1 +
 9 files changed, 1086 insertions(+), 9 deletions(-)
---
base-commit: f5602ca81598f12d3fdb327beb29688871955596
change-id: 20231101-b4-camss-sc8280xp-0e1b91eb21bf

Best regards,