mbox series

[v2,0/3] riscv: dts: starfive: add Milkv Mars board device tree

Message ID 20231202153353.635-1-jszhang@kernel.org
Headers show
Series riscv: dts: starfive: add Milkv Mars board device tree | expand

Message

Jisheng Zhang Dec. 2, 2023, 3:33 p.m. UTC 
The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:

- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI

patch1 adds 'cpus' label
patch2 adds "milkv,mars" board dt-binding
patch3 adds the devicetree file describing the currently supported
features:
Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.

Since v1:
 - add two new patches which add "cpus" label and board dt-binding
 - adopt Krzysztof's suggestions, thanks

Hi Conor,

I see you have sent a patch which moves the timebase-frequency property
to soc dtsi, but this series doesn't rebase on that. I can update it
once your patch is merged.

Thanks

Jisheng Zhang (3):
  riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
  dt-bindings: riscv: starfive: add Milkv Mars board
  riscv: dts: starfive: add Milkv Mars board device tree

 .../devicetree/bindings/riscv/starfive.yaml   |   1 +
 arch/riscv/boot/dts/starfive/Makefile         |   1 +
 arch/riscv/boot/dts/starfive/jh7100.dtsi      |   2 +-
 .../boot/dts/starfive/jh7110-milkv-mars.dts   | 637 ++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |   2 +-
 5 files changed, 641 insertions(+), 2 deletions(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts