mbox series

[v5,00/10] Add displays support for bsh-smm-s2/pro boards

Message ID 20231207141723.108004-1-dario.binacchi@amarulasolutions.com
Headers show
Series Add displays support for bsh-smm-s2/pro boards | expand

Message

Dario Binacchi Dec. 7, 2023, 2:16 p.m. UTC 
The series adds drivers for the displays used by bsh-smm-s2/pro boards.
This required applying some patches to the samsung-dsim driver and the
drm_bridge.c module.

Changes in v5:
- Replace a 'return ret' with a 'goto fail' in the r63353_panel_activate()
- Add 'Reviewed-by' tag of Krzysztof Kozlowski

Changes in v4:
- Set the reset gpio to low in a single operation
- Remove duplicated code for prepare/unprepare callbacks
- Remove duplicated code for prepare/unprepare callbacks
- Add Reviewed-by tag of Neil Armstrong

Changes in v3:
- Add 'Reviewed-by' tag of Krzysztof Kozlowski.
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Drop power-supply
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01
  into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller.

Changes in v2:
- Add $ref to panel-common.yaml
- Drop port, reset-gpios, and backlight
- Set port and backlight ad required
- Replace additionalProperties with unevaluatedProperties
- Adjust the timings of the panel reset
- Add $ref to panel-common.yaml
- Drop port, reset-gpios, and backlight
- Set port and backlight ad required
- Replace additionalProperties with unevaluatedProperties
- Adjust the mipi_dsi node based on the latest patches merged into
  the mainline in the dtsi files it includes.
- Added to the series the following patches:
  - 0001 drm/bridge: Fix bridge disable logic
  - 0002 drm/bridge: Fix a use case in the bridge disable logic
  - 0003 samsung-dsim: enter display mode in the enable() callback
  - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Dario Binacchi (4):
  drm/bridge: Fix bridge disable logic
  drm/bridge: Fix a use case in the bridge disable logic
  drm: bridge: samsung-dsim: enter display mode in the enable() callback
  drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Michael Trimarchi (6):
  dt-bindings: display: panel: Add synaptics r63353 panel controller
  drm/panel: Add Synaptics R63353 panel driver
  dt-bindings: display: panel: Add Ilitek ili9805 panel controller
  drm/panel: Add Ilitek ILI9805 panel driver
  drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel
  arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

 .../display/panel/ilitek,ili9805.yaml         |  62 +++
 .../display/panel/synaptics,r63353.yaml       |  61 +++
 MAINTAINERS                                   |  12 +
 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
 .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 121 ++++++
 drivers/gpu/drm/bridge/samsung-dsim.c         |  14 +-
 drivers/gpu/drm/drm_bridge.c                  |   9 +-
 drivers/gpu/drm/panel/Kconfig                 |  18 +
 drivers/gpu/drm/panel/Makefile                |   2 +
 drivers/gpu/drm/panel/panel-ilitek-ili9805.c  | 406 ++++++++++++++++++
 .../gpu/drm/panel/panel-synaptics-r63353.c    | 363 ++++++++++++++++
 11 files changed, 1062 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
 create mode 100644 Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi
 create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9805.c
 create mode 100644 drivers/gpu/drm/panel/panel-synaptics-r63353.c