mbox series

[v2,0/3] Convert thermal bindings to yaml

Message ID cover.1583412540.git.amit.kucheria@linaro.org
Headers show
Series Convert thermal bindings to yaml | expand

Message

Amit Kucheria March 5, 2020, 12:56 p.m. UTC 
Hi all,

Here is a series splitting up the thermal bindings into 3 separate bindings
in YAML, one each of the sensor, cooling-device and the thermal zones.
Since I was learning about YAML parsers while creating these bindings,
there are bound to be some issues.

Changes since v1:
- Addressed review comments from Rob
- Moved the license back to GPLv2, waiting for other authors to give
  permission to relicense to BSD-2-Clause as well
- Fixed up warnings thrown by dt_binding_check

I have to add that the bindings as they exist today, don't really follow
the "describe the hardware" model of devicetree. e.g. the entire
thermal-zone binding is a software abstraction to tie arbitrary,
board-specific trip points to cooling strategies. This doesn't fit well
into the model where the same SoC in two different form-factor devices e.g.
mobile and laptop, will have fairly different thermal profiles and might
benefit from different trip points and mitigation heuristics. I've started
some experiments with moving the thermal zone data to a board-specific
platform data that is used to initialise a "thermal zone driver".

In any case, if we ever move down that path, it'll probably end up being v2
of the binding, so this series is still relevant.

Please help review.

Regards,
Amit

Amit Kucheria (3):
  dt-bindings: thermal: Add yaml bindings for thermal sensors
  dt-bindings: thermal: Add yaml bindings for thermal cooling-devices
  dt-bindings: thermal: Add yaml bindings for thermal zones

 .../thermal/thermal-cooling-devices.yaml      | 114 ++++++
 .../bindings/thermal/thermal-sensor.yaml      |  72 ++++
 .../bindings/thermal/thermal-zones.yaml       | 325 ++++++++++++++++++
 3 files changed, 511 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
 create mode 100644 Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
 create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml