Show patches with: Submitter = Roger Quadros       |   134 patches
« 1 2 »
Patch Series S/W/F Date Submitter Delegate State
[v5,5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Untitled series #74122 --- 2020-09-30 Roger Quadros New
[v4,5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Untitled series #73808 --- 2020-09-21 Roger Quadros Superseded
[v3,5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Untitled series #70795 --- 2020-09-15 Roger Quadros Superseded
[v2,5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Untitled series #48409 --- 2020-09-07 Roger Quadros Superseded
[5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Untitled series #48404 --- 2020-09-07 Roger Quadros Superseded
[3/3] usb: cdns3: Enable workaround for USB2.0 PHY Rx compliance test PHY lockup usb: cdns,usb3: Convert DT binding to YALM --- 2020-08-25 Roger Quadros New
[v4,3/3] phy: omap-usb2-phy: disable PHY charger detect phy: omap-usb2: add quirk to disable charger detection --- 2020-07-16 Roger Quadros New
[v4,2/3] dt-binding: phy: ti,omap-usb2: Add quirk to disable charger detection phy: omap-usb2: add quirk to disable charger detection --- 2020-07-16 Roger Quadros New
[v4,1/3] dt-binding: phy: convert ti,omap-usb2 to YAML phy: omap-usb2: add quirk to disable charger detection --- 2020-07-16 Roger Quadros New
[v3,3/3] phy: omap-usb2-phy: disable PHY charger detect phy: omap-usb2: add quirk to disable charger detection --- 2020-06-30 Roger Quadros Superseded
[v3,2/3] dt-binding: phy: ti,omap-usb2: Add quirk to disable charger detection phy: omap-usb2: add quirk to disable charger detection --- 2020-06-30 Roger Quadros Superseded
[v3,1/3] dt-binding: phy: convert ti,omap-usb2 to YAML phy: omap-usb2: add quirk to disable charger detection --- 2020-06-30 Roger Quadros Superseded
[v4,6/6] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-06-29 Roger Quadros Superseded
[v4,5/6] arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-06-29 Roger Quadros Superseded
[v4,4/6] arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-06-29 Roger Quadros Superseded
[v4,3/6] arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-06-29 Roger Quadros New
[v4,2/6] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-06-29 Roger Quadros Superseded
[v4,1/6] dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-06-29 Roger Quadros New
dt-bindings: usb: ti,keystone-dwc3.yaml: Improve schema dt-bindings: usb: ti,keystone-dwc3.yaml: Improve schema --- 2020-06-02 Roger Quadros Accepted
[PATCHv2,1/3] dt-binding: phy: convert ti,omap-usb2 to YAML phy: omap-usb2: add quirk to disable charger detection --- 2020-06-02 Roger Quadros Accepted
[4/4] phy: omap-usb2-phy: disable PHY charger detect phy: omap-usb2: add quirk to disable charger detection --- 2020-05-15 Roger Quadros Superseded
[2/4] dt-binding: phy: convert ti,omap-usb2 to YAML phy: omap-usb2: add quirk to disable charger detection --- 2020-05-15 Roger Quadros New
[3/3] usb: dwc3: keystone: Turn on USB3 PHY before controller usb: dwc3: keystone: Convert binding to YAML --- 2020-05-13 Roger Quadros New
[v3,6/7] arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 [v3,1/7] dt-bindings: syscon: Add TI's J721E specific compatible string --- 2020-05-08 Roger Quadros Accepted
[v3,5/7] arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX [v3,1/7] dt-bindings: syscon: Add TI's J721E specific compatible string --- 2020-05-08 Roger Quadros Superseded
[v3,3/7] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes [v3,1/7] dt-bindings: syscon: Add TI's J721E specific compatible string --- 2020-05-08 Roger Quadros Superseded
[v3,1/7] dt-bindings: syscon: Add TI's J721E specific compatible string [v3,1/7] dt-bindings: syscon: Add TI's J721E specific compatible string --- 2020-05-08 Roger Quadros New
[v2] ARM: dts: dra7: Add bus_dma_limit for L3 bus [v2] ARM: dts: dra7: Add bus_dma_limit for L3 bus --- 2020-03-13 Roger Quadros New
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes --- 2020-03-11 Roger Quadros New
ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: dra7: Add bus_dma_limit for L3 bus --- 2020-03-10 Roger Quadros New
[v2,6/6] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-03-03 Roger Quadros Superseded
[v2,3/6] arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select SERDES lane mux arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-03-03 Roger Quadros New
[v2,2/6] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support --- 2020-03-03 Roger Quadros Superseded
[5/5] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line [1/5] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes --- 2020-01-08 Roger Quadros Accepted
[3/5] arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX [1/5] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes --- 2020-01-08 Roger Quadros Accepted
[1/5] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes [1/5] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes --- 2020-01-08 Roger Quadros New
[v5,3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir [v5,1/3] phy: cadence: Sierra: add phy_reset hook --- 2020-01-06 Roger Quadros New
[v5,1/3] phy: cadence: Sierra: add phy_reset hook [v5,1/3] phy: cadence: Sierra: add phy_reset hook --- 2020-01-06 Roger Quadros New
[v4,3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir phy: cadence: j721e-wiz: Add Type-C plug flip support --- 2019-10-28 Roger Quadros Accepted
[v4,2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO phy: cadence: j721e-wiz: Add Type-C plug flip support --- 2019-10-28 Roger Quadros New
[v4,1/2] dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller [v4,1/2] dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller --- 2019-10-28 Roger Quadros Accepted
[v3,2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO phy: cadence: j721e-wiz: Add Type-C plug flip support --- 2019-10-24 Roger Quadros New
[v2,1/3] phy: cadence: Sierra: add phy_reset hook [v2,1/3] phy: cadence: Sierra: add phy_reset hook --- 2019-10-23 Roger Quadros Accepted
[3/3] phy: ti: j721e-wiz: Manage typec-gpio-dir phy: cadence: j721e-wiz: Add Type-C plug flip support --- 2019-10-22 Roger Quadros New
[2/3] dt-bindings: phy: ti,phy-j721e-wiz: Add Type-C dir GPIO phy: cadence: j721e-wiz: Add Type-C plug flip support --- 2019-10-22 Roger Quadros New
[1/3] phy: cadence: Sierra: add phy_reset hook phy: cadence: j721e-wiz: Add Type-C plug flip support --- 2019-10-22 Roger Quadros Superseded
[v2,2/2] usb: cdns3: Add TI specific wrapper driver usb: cdns3: Add TI wrapper --- 2019-10-21 Roger Quadros New
[v2,1/1] ARM: dts: dra7: Separate AM57 dtsi files [v2,1/1] ARM: dts: dra7: Separate AM57 dtsi files --- 2019-04-08 Roger Quadros Accepted
[1/4] dt-binding: bus: ti-sysc: Add support for PRUSS SYSC type AM57xx: PRU ICSS Support --- 2019-02-04 Roger Quadros New
[v2,12/14] remoteproc/pru: Add support for virtio rpmsg stack Add support for TI PRU ICSS --- 2019-02-04 Roger Quadros New
[v2,05/14] remoteproc: add map parameter to da_to_va Add support for TI PRU ICSS --- 2019-02-04 Roger Quadros New
[1/3] arm64: dts: ti: am654: Add Main System Control Module node arm64: ti: k3-am654: USB support --- 2019-01-11 Roger Quadros New
arm64: dts: ti: k3-am65: Add MSMC RAM node arm64: dts: ti: k3-am65: Add MSMC RAM node --- 2019-01-11 Roger Quadros Accepted
[v2,1/3] usb: dwc3: gadget: Fix OTG events when gadget driver isn't loaded usb: dwc3: Add support for AM654 USB --- 2019-01-10 Roger Quadros Accepted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port ARM: dts: omap5: Fix dual-role mode on Super-Speed port --- 2018-12-05 Roger Quadros Accepted
[3/5] ARM: dts: dra7-evm: Add extcon to USB2 port ARM: dts: dra7/am7xx: USB fixes and enhancements --- 2018-05-29 Roger Quadros New
[1/1] ARM: dts: dra7x-evm: Enable dual-role mode for USB1 ARM: dts: dra7x-evm: Enable dual-role mode for USB1 --- 2017-04-11 Roger Quadros New
[v11,13/14] usb: gadget: udc: adapt to OTG core --- 2016-06-13 Roger Quadros New
[v10,13/14] usb: gadget: udc: adapt to OTG core --- 2016-06-10 Roger Quadros Superseded
[v10,11/14] usb: otg: use dev_dbg() instead of VDBG() --- 2016-06-09 Roger Quadros New
[v8,13/14] usb: gadget: udc: adapt to OTG core --- 2016-06-08 Roger Quadros New
[v9,09/14] usb: of: add an API to get OTG device from USB controller node --- 2016-05-20 Roger Quadros New
[v8,08/14] usb: otg: add OTG/dual-role core --- 2016-05-16 Roger Quadros New
[v8,08/14] usb: otg: add OTG/dual-role core --- 2016-05-13 Roger Quadros New
[v8,01/14] usb: hcd: Initialize hcd->flags to 0 --- 2016-05-13 Roger Quadros New
[v7,08/14] usb: otg: add OTG/dual-role core --- 2016-05-02 Roger Quadros Superseded
[v7,07/14] usb: otg: get rid of CONFIG_USB_OTG_FSM in favour of CONFIG_USB_OTG --- 2016-05-02 Roger Quadros New
[v7,06/14] usb: gadget.h: Add OTG to gadget interface --- 2016-05-02 Roger Quadros New
ARM: dts: dra7xx: Fix compatible string for PCF8575 chip --- 2016-04-25 Roger Quadros New
[v6,00/17] memory: omap-gpmc: mtd: nand: Support GPMC NAND on non-OMAP platforms --- 2016-04-18 Roger Quadros New
[13/13] ARM: dts: omap3-beagle: Provide NAND ready pin --- 2016-04-07 Roger Quadros New
[12/13] ARM: dts: am335x: Provide NAND ready pin --- 2016-04-07 Roger Quadros Accepted
[11/13] ARM: dts: am437x: Provide NAND ready pin --- 2016-04-07 Roger Quadros Accepted
[09/13] ARM: dts: dm816x: Enable gpio controller for GPMC --- 2016-04-07 Roger Quadros Accepted
[08/13] ARM: dts: dm814x: Enable gpio controller for GPMC --- 2016-04-07 Roger Quadros Accepted
[07/13] ARM: dts: omap3: Enable gpio controller for GPMC --- 2016-04-07 Roger Quadros New
[06/13] ARM: dts: am4372: Enable gpio controller for GPMC --- 2016-04-07 Roger Quadros Accepted
[04/13] ARM: dts: dra7: Enable gpio controller for GPMC --- 2016-04-07 Roger Quadros Accepted
[03/13] ARM: dts: omap5: Enable gpio and interrupt controller for GPMC --- 2016-04-07 Roger Quadros Accepted
[01/13] ARM: dts: omap24xx: Enable gpio and interrupt controller for GPMC --- 2016-04-07 Roger Quadros New
[v6,10/26] mtd: nand: omap: Update DT binding documentation --- 2016-03-07 Roger Quadros Accepted
[v7,5/9] ARM: dts: am335x: Fix NAND device nodes --- 2016-02-23 Roger Quadros New
[v5,25/26] ARM: dts: dm816x: Fix gpmc and NAND node --- 2016-02-19 Roger Quadros New
[v5,16/26] memory: omap-gpmc: Prevent GPMC_STATUS from being accessed via gpmc_regs --- 2016-02-19 Roger Quadros Accepted
[v5,13/26] memory: omap-gpmc: Support general purpose input for WAITPINs --- 2016-02-19 Roger Quadros New
[v3,20/27] ARM: dts: dra7: Fix NAND device nodes. --- 2015-09-18 Roger Quadros New
[v3,16/27] memory: omap-gpmc: Reserve WAITPIN if needed for WAIT monitoring --- 2015-09-18 Roger Quadros Accepted
[v3,12/27] mtd: nand: omap: Update DT binding documentation --- 2015-09-18 Roger Quadros New
[v3,09/27] mtd: nand: omap2: manage NAND interrupts --- 2015-09-18 Roger Quadros New
[v3,08/27] memory: omap-gpmc: Add IRQ ops for GPMC-NAND interface --- 2015-09-18 Roger Quadros New
[v3,06/27] mtd: nand: omap2: Switch to using GPMC-NAND ops for writebuffer empty check --- 2015-09-18 Roger Quadros Accepted
[v3,04/27] mtd: nand: omap2: Use gpmc_omap_get_nand_ops() to get NAND registers --- 2015-09-18 Roger Quadros Accepted
[v3,02/27] ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data --- 2015-09-18 Roger Quadros Accepted
[28/36] ARM: OMAP2+: nand: Update gpmc_nand_init() to use generic_gpmc_init() --- 2014-06-11 Roger Quadros New
[26/36] ARM: OMAP2+: gpmc-smc91x: Get rid of retime() from omap_smc91x_platform_data --- 2014-06-11 Roger Quadros New
[24/36] ARM: OMAP2+: gpmc: add NAND specific setup --- 2014-06-11 Roger Quadros New
[23/36] ARM: OMAP2+: gpmc: use platform data to configure CS space and poplulate device --- 2014-06-11 Roger Quadros New
[22/36] ARM: OMAP2+: gmpc: add gpmc_generic_init() --- 2014-06-11 Roger Quadros New
[21/36] ARM: dts: OMAP2+: Fix OneNAND device nodes --- 2014-06-11 Roger Quadros New
[20/36] mtd: onenand: omap: Clean up device tree support --- 2014-06-11 Roger Quadros New
« 1 2 »