@@ -4179,80 +4179,6 @@ void regulator_unregister(struct regulator_dev *rdev)
}
EXPORT_SYMBOL_GPL(regulator_unregister);
-static int _regulator_suspend_prepare(struct device *dev, void *data)
-{
- struct regulator_dev *rdev = dev_to_rdev(dev);
- const suspend_state_t *state = data;
- int ret;
-
- mutex_lock(&rdev->mutex);
- ret = suspend_prepare(rdev, *state);
- mutex_unlock(&rdev->mutex);
-
- return ret;
-}
-
-/**
- * regulator_suspend_prepare - prepare regulators for system wide suspend
- * @state: system suspend state
- *
- * Configure each regulator with it's suspend operating parameters for state.
- * This will usually be called by machine suspend code prior to supending.
- */
-int regulator_suspend_prepare(suspend_state_t state)
-{
- /* ON is handled by regulator active state */
- if (state == PM_SUSPEND_ON)
- return -EINVAL;
-
- return class_for_each_device(®ulator_class, NULL, &state,
- _regulator_suspend_prepare);
-}
-EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
-
-static int _regulator_suspend_finish(struct device *dev, void *data)
-{
- struct regulator_dev *rdev = dev_to_rdev(dev);
- int ret;
-
- mutex_lock(&rdev->mutex);
- if (rdev->use_count > 0 || rdev->constraints->always_on) {
- if (!_regulator_is_enabled(rdev)) {
- ret = _regulator_do_enable(rdev);
- if (ret)
- dev_err(dev,
- "Failed to resume regulator %d\n",
- ret);
- }
- } else {
- if (!have_full_constraints())
- goto unlock;
- if (!_regulator_is_enabled(rdev))
- goto unlock;
-
- ret = _regulator_do_disable(rdev);
- if (ret)
- dev_err(dev, "Failed to suspend regulator %d\n", ret);
- }
-unlock:
- mutex_unlock(&rdev->mutex);
-
- /* Keep processing regulators in spite of any errors */
- return 0;
-}
-
-/**
- * regulator_suspend_finish - resume regulators from system wide suspend
- *
- * Turn on regulators that might be turned off by regulator_suspend_prepare
- * and that should be turned on according to the regulators properties.
- */
-int regulator_suspend_finish(void)
-{
- return class_for_each_device(®ulator_class, NULL, NULL,
- _regulator_suspend_finish);
-}
-EXPORT_SYMBOL_GPL(regulator_suspend_finish);
/**
* regulator_has_full_constraints - the system has fully specified constraints
@@ -236,12 +236,12 @@ struct regulator_init_data {
#ifdef CONFIG_REGULATOR
void regulator_has_full_constraints(void);
-int regulator_suspend_prepare(suspend_state_t state);
-int regulator_suspend_finish(void);
#else
static inline void regulator_has_full_constraints(void)
{
}
+#endif
+
static inline int regulator_suspend_prepare(suspend_state_t state)
{
return 0;
@@ -250,6 +250,5 @@ static inline int regulator_suspend_finish(void)
{
return 0;
}
-#endif
#endif
Regualtor suspend/resume functions should only be called by PM suspend core via registering dev_pm_ops, and regulator devices should implement the callback functions. Thus, any regulator consumer shouldn't call the regulator suspend/resume functions directly. In order to avoid compile errors, two empty functions with the same name still be left for the time being. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> --- drivers/regulator/core.c | 74 --------------------------------------- include/linux/regulator/machine.h | 5 ++- 2 files changed, 2 insertions(+), 77 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html