| Message ID | 1518698991-10099-2-git-send-email-t-kristo@ti.com |
|---|---|
| State | Accepted |
| Commit | be02637f6b741875aa0779c35f31591738aa2cd9 |
| Headers | show |
| Series | [1/5] dt-bindings: clock: ti: add latching support to mux and divider clocks | expand |
On Thu, Feb 15, 2018 at 02:49:47PM +0200, Tero Kristo wrote: > Certain hardware configurations, like dra76x, have some of the clock > registers partitioned in a funky manner that requires the clock > control setup to be latched for PRCM to be notified of the change. This > is accomplished with a separate control bit under the register. Add > support for this clock latching support to divider and mux clocks. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > --- > Documentation/devicetree/bindings/clock/ti/divider.txt | 3 +++ > Documentation/devicetree/bindings/clock/ti/mux.txt | 3 +++ > 2 files changed, 6 insertions(+) Reviewed-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt index 35a6f5c..9b13b32 100644 --- a/Documentation/devicetree/bindings/clock/ti/divider.txt +++ b/Documentation/devicetree/bindings/clock/ti/divider.txt @@ -75,6 +75,9 @@ Optional properties: - ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0, see [2] - ti,set-rate-parent : clk_set_rate is propagated to parent +- ti,latch-bit : latch the divider value to HW, only needed if the register + access requires this. As an example dra76x DPLL_GMAC H14 divider implements + such behavior. Examples: dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 { diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt index 2d0d170..eec8994 100644 --- a/Documentation/devicetree/bindings/clock/ti/mux.txt +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -48,6 +48,9 @@ Optional properties: zero - ti,set-rate-parent : clk_set_rate is propagated to parent clock, not supported by the composite-mux-clock subtype +- ti,latch-bit : latch the mux value to HW, only needed if the register + access requires this. As an example, dra7x DPLL_GMAC H14 muxing + implements such behavior. Examples:
Certain hardware configurations, like dra76x, have some of the clock registers partitioned in a funky manner that requires the clock control setup to be latched for PRCM to be notified of the change. This is accomplished with a separate control bit under the register. Add support for this clock latching support to divider and mux clocks. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- Documentation/devicetree/bindings/clock/ti/divider.txt | 3 +++ Documentation/devicetree/bindings/clock/ti/mux.txt | 3 +++ 2 files changed, 6 insertions(+) -- 1.9.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html