@@ -20,6 +20,11 @@
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
};
+ extcon_usb2: extcon_usb2 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ };
+
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "DRA7xx-EVM";
@@ -198,8 +203,13 @@
extcon = <&extcon_usb1>;
};
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
&usb2 {
dr_mode = "host";
+ extcon = <&extcon_usb2>;
};
&atl {
@@ -54,11 +54,6 @@
regulator-max-microvolt = <1800000>;
};
- extcon_usb2: extcon_usb2 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
- };
-
vtt_fixed: fixedregulator-vtt {
compatible = "regulator-fixed";
regulator-name = "vtt_fixed";
@@ -338,10 +333,6 @@
vdd-supply = <&smps123_reg>;
};
-&omap_dwc3_2 {
- extcon = <&extcon_usb2>;
-};
-
&elm {
status = "okay";
};
@@ -399,6 +399,7 @@
&usb2 {
dr_mode = "host";
+ extcon = <&extcon_usb2>;
};
&mmc1 {
Both ports on the dra7-evm and related boards can be used as dual-role ports. Although we don't enable dual-role mode for USB2 port let's add the necessary extcon bits to it. Move the common portion of extcon_usb2 into dra7-evm-common.dtsi Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/boot/dts/dra7-evm-common.dtsi | 10 ++++++++++ arch/arm/boot/dts/dra7-evm.dts | 9 --------- arch/arm/boot/dts/dra72-evm-common.dtsi | 1 + 3 files changed, 11 insertions(+), 9 deletions(-) -- cheers, -roger Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html