@@ -555,7 +555,7 @@
&mcasp3 {
#sound-dai-cells = <0>;
- assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+ assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
assigned-clock-parents = <&sys_clkin2>;
status = "okay";
@@ -214,7 +214,7 @@
&atl {
assigned-clocks = <&abe_dpll_sys_clk_mux>,
- <&atl_clkctrl DRA7_ATL_CLKCTRL 26>,
+ <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
<&dpll_abe_ck>,
<&dpll_abe_m2x2_ck>,
<&atl_clkin2_ck>;
@@ -232,7 +232,7 @@
&mcasp3 {
#sound-dai-cells = <0>;
- assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+ assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
assigned-clock-parents = <&atl_clkin2_ck>;
status = "okay";
@@ -897,7 +897,7 @@
ti,hwmods = "timer1";
ti,timer-alwon;
clock-names = "fck";
- clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
};
timer2: timer@48032000 {
@@ -1378,7 +1378,7 @@
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "qspi";
- clocks = <&l4per_clkctrl DRA7_QSPI_CLKCTRL 25>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
clock-names = "fck";
num-cs = <4>;
interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
@@ -1401,7 +1401,7 @@
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
syscon-phy-power = <&scm_conf 0x374>;
clocks = <&sys_clkin1>,
- <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>;
+ <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
clock-names = "sysclk", "refclk";
syscon-pllreset = <&scm_conf 0x3fc>;
#phy-cells = <0>;
@@ -1416,9 +1416,9 @@
syscon-pcs = <&scm_conf_pcie 0x10>;
clocks = <&dpll_pcie_ref_ck>,
<&dpll_pcie_ref_m2ldo_ck>,
- <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 8>,
- <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 9>,
- <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 10>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>,
<&optfclk_pciephy_div>,
<&sys_clkin1>;
clock-names = "dpll_ref", "dpll_ref_m2",
@@ -1436,9 +1436,9 @@
syscon-pcs = <&scm_conf_pcie 0x10>;
clocks = <&dpll_pcie_ref_ck>,
<&dpll_pcie_ref_m2ldo_ck>,
- <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 8>,
- <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 9>,
- <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 10>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+ <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>,
<&optfclk_pciephy_div>,
<&sys_clkin1>;
clock-names = "dpll_ref", "dpll_ref_m2",
@@ -1455,7 +1455,7 @@
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
phys = <&sata_phy>;
phy-names = "sata-phy";
- clocks = <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>;
+ clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
ti,hwmods = "sata";
ports-implemented = <0x1>;
};
@@ -1483,7 +1483,7 @@
reg = <0x4a084000 0x400>;
syscon-phy-power = <&scm_conf 0x300>;
clocks = <&usb_phy1_always_on_clk32k>,
- <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>;
+ <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
clock-names = "wkupclk",
"refclk";
#phy-cells = <0>;
@@ -1495,7 +1495,7 @@
reg = <0x4a085000 0x400>;
syscon-phy-power = <&scm_conf 0xe74>;
clocks = <&usb_phy2_always_on_clk32k>,
- <&l3init_clkctrl DRA7_USB_OTG_SS2_CLKCTRL 8>;
+ <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
clock-names = "wkupclk",
"refclk";
#phy-cells = <0>;
@@ -1510,7 +1510,7 @@
syscon-phy-power = <&scm_conf 0x370>;
clocks = <&usb_phy3_always_on_clk32k>,
<&sys_clkin1>,
- <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>;
+ <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
clock-names = "wkupclk",
"sysclk",
"refclk";
@@ -1528,7 +1528,7 @@
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
- clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_CORE_CLKCTRL 0>;
+ clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
@@ -1547,7 +1547,7 @@
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
- clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_MPU_CLKCTRL 0>;
+ clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
@@ -1670,7 +1670,7 @@
ti,hwmods = "atl";
ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
- clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
clock-names = "fck";
status = "disabled";
};
@@ -1686,8 +1686,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
dma-names = "tx", "rx";
- clocks = <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 22>, <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 24>,
- <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 28>;
+ clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+ <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
};
@@ -1703,9 +1703,9 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
dma-names = "tx", "rx";
- clocks = <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 22>,
- <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 24>,
- <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 28>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
clock-names = "fck", "ahclkx", "ahclkr";
status = "disabled";
};
@@ -1721,8 +1721,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
dma-names = "tx", "rx";
- clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 22>,
- <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
@@ -1738,8 +1738,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
dma-names = "tx", "rx";
- clocks = <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 22>,
- <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 24>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
@@ -1755,8 +1755,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
dma-names = "tx", "rx";
- clocks = <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 22>,
- <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 24>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
@@ -1772,8 +1772,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
dma-names = "tx", "rx";
- clocks = <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 22>,
- <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 24>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
@@ -1789,8 +1789,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
dma-names = "tx", "rx";
- clocks = <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 22>,
- <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 24>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
@@ -1806,8 +1806,8 @@
interrupt-names = "tx", "rx";
dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
dma-names = "tx", "rx";
- clocks = <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 22>,
- <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 24>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>,
+ <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
clock-names = "fck", "ahclkx";
status = "disabled";
};
@@ -1829,7 +1829,7 @@
mac: ethernet@48484000 {
compatible = "ti,dra7-cpsw","ti,cpsw";
ti,hwmods = "gmac";
- clocks = <&gmac_main_clk>, <&l3init_clkctrl DRA7_GMAC_CLKCTRL 25>;
+ clocks = <&gmac_main_clk>, <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
clock-names = "fck", "cpts";
cpdma_channels = <8>;
ale_entries = <1024>;
@@ -1899,7 +1899,7 @@
reg = <0x4ae3c000 0x2000>;
syscon-raminit = <&scm_conf 0x558 0>;
interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&wkupaon_clkctrl DRA7_DCAN1_CLKCTRL 24>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 24>;
status = "disabled";
};
@@ -1930,7 +1930,7 @@
reg = <0x58001000 0x1000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dss_dispc";
- clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
/* CTRL_CORE_SMA_SW_1 */
syscon-pol = <&scm_conf 0x534>;
@@ -1946,8 +1946,8 @@
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
ti,hwmods = "dss_hdmi";
- clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
- <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
dmas = <&sdma_xbar 76>;
dma-names = "audio_tx";
@@ -530,7 +530,7 @@
&atl {
assigned-clocks = <&abe_dpll_sys_clk_mux>,
- <&atl_clkctrl DRA7_ATL_CLKCTRL 26>,
+ <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
<&dpll_abe_ck>,
<&dpll_abe_m2x2_ck>,
<&atl_clkin2_ck>;
@@ -548,7 +548,7 @@
&mcasp3 {
#sound-dai-cells = <0>;
- assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+ assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
assigned-clock-parents = <&atl_clkin2_ck>;
status = "okay";
@@ -25,8 +25,8 @@
<0x58004300 0x20>;
reg-names = "dss", "pll1_clkctrl", "pll1";
- clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>,
- <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>;
clock-names = "fck", "video1_clk";
};
@@ -103,9 +103,9 @@
reg-names = "dss", "pll1_clkctrl", "pll1",
"pll2_clkctrl", "pll2";
- clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>,
- <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 12>,
- <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 13>;
+ clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>,
+ <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>;
clock-names = "fck", "video1_clk", "video2_clk";
};
@@ -24,7 +24,7 @@
ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
SYSC_DRA7_MCAN_ENAWAKEUP)>;
ti,syss-mask = <1>;
- clocks = <&wkupaon_clkctrl DRA7_ADC_CLKCTRL 0>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
clock-names = "fck";
m_can0: mcan@1a00 {
@@ -11,25 +11,25 @@
atl_clkin0_ck: atl_clkin0_ck {
#clock-cells = <0>;
compatible = "ti,dra7-atl-clock";
- clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
};
atl_clkin1_ck: atl_clkin1_ck {
#clock-cells = <0>;
compatible = "ti,dra7-atl-clock";
- clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
};
atl_clkin2_ck: atl_clkin2_ck {
#clock-cells = <0>;
compatible = "ti,dra7-atl-clock";
- clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
};
atl_clkin3_ck: atl_clkin3_ck {
#clock-cells = <0>;
compatible = "ti,dra7-atl-clock";
- clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
+ clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
};
hdmi_clkin_ck: hdmi_clkin_ck {
@@ -1526,44 +1526,82 @@
};
&cm_core_aon {
- mpu_cm: mpu_cm@300 {
+ mpu_cm: mpu-cm@300 {
compatible = "ti,omap4-cm";
reg = <0x300 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x300 0x100>;
- mpu_clkctrl: clk@20 {
+ mpu_clkctrl: mpu-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
+
+ };
+
+ dsp1_cm: dsp1-cm@400 {
+ compatible = "ti,omap4-cm";
+ reg = <0x400 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x400 0x100>;
+
+ dsp1_clkctrl: dsp1-clkctrl@20 {
+ compatible = "ti,clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+
};
- ipu_cm: ipu_cm@500 {
+ ipu_cm: ipu-cm@500 {
compatible = "ti,omap4-cm";
reg = <0x500 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x500 0x100>;
- ipu_clkctrl: clk@40 {
+ ipu1_clkctrl: ipu1-clkctrl@20 {
+ compatible = "ti,clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+
+ ipu_clkctrl: ipu-clkctrl@50 {
+ compatible = "ti,clkctrl";
+ reg = <0x50 0x34>;
+ #clock-cells = <2>;
+ };
+
+ };
+
+ dsp2_cm: dsp2-cm@600 {
+ compatible = "ti,omap4-cm";
+ reg = <0x600 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x600 0x100>;
+
+ dsp2_clkctrl: dsp2-clkctrl@20 {
compatible = "ti,clkctrl";
- reg = <0x40 0x44>;
+ reg = <0x20 0x4>;
#clock-cells = <2>;
};
+
};
- rtc_cm: rtc_cm@700 {
+ rtc_cm: rtc-cm@700 {
compatible = "ti,omap4-cm";
reg = <0x700 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x700 0x100>;
- rtc_clkctrl: clk@40 {
+ rtc_clkctrl: rtc-clkctrl@20 {
compatible = "ti,clkctrl";
- reg = <0x40 0x8>;
+ reg = <0x20 0x28>;
#clock-cells = <2>;
};
};
@@ -1571,160 +1609,207 @@
};
&cm_core {
- coreaon_cm: coreaon_cm@600 {
+ coreaon_cm: coreaon-cm@600 {
compatible = "ti,omap4-cm";
reg = <0x600 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x600 0x100>;
- coreaon_clkctrl: clk@20 {
+ coreaon_clkctrl: coreaon-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x1c>;
#clock-cells = <2>;
};
};
- l3main1_cm: l3main1_cm@700 {
+ l3main1_cm: l3main1-cm@700 {
compatible = "ti,omap4-cm";
reg = <0x700 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x700 0x100>;
- l3main1_clkctrl: clk@20 {
+ l3main1_clkctrl: l3main1-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x74>;
#clock-cells = <2>;
};
+
+ };
+
+ ipu2_cm: ipu2-cm@900 {
+ compatible = "ti,omap4-cm";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x900 0x100>;
+
+ ipu2_clkctrl: ipu2-clkctrl@20 {
+ compatible = "ti,clkctrl";
+ reg = <0x20 0x4>;
+ #clock-cells = <2>;
+ };
+
};
- dma_cm: dma_cm@a00 {
+ dma_cm: dma-cm@a00 {
compatible = "ti,omap4-cm";
reg = <0xa00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xa00 0x100>;
- dma_clkctrl: clk@20 {
+ dma_clkctrl: dma-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- emif_cm: emif_cm@b00 {
+ emif_cm: emif-cm@b00 {
compatible = "ti,omap4-cm";
reg = <0xb00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xb00 0x100>;
- emif_clkctrl: clk@20 {
+ emif_clkctrl: emif-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x4>;
#clock-cells = <2>;
};
};
- atl_cm: atl_cm@c00 {
+ atl_cm: atl-cm@c00 {
compatible = "ti,omap4-cm";
reg = <0xc00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xc00 0x100>;
- atl_clkctrl: clk@0 {
+ atl_clkctrl: atl-clkctrl@0 {
compatible = "ti,clkctrl";
reg = <0x0 0x4>;
#clock-cells = <2>;
};
};
- l4cfg_cm: l4cfg_cm@d00 {
+ l4cfg_cm: l4cfg-cm@d00 {
compatible = "ti,omap4-cm";
reg = <0xd00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xd00 0x100>;
- l4cfg_clkctrl: clk@20 {
+ l4cfg_clkctrl: l4cfg-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x84>;
#clock-cells = <2>;
};
};
- l3instr_cm: l3instr_cm@e00 {
+ l3instr_cm: l3instr-cm@e00 {
compatible = "ti,omap4-cm";
reg = <0xe00 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0xe00 0x100>;
- l3instr_clkctrl: clk@20 {
+ l3instr_clkctrl: l3instr-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0xc>;
#clock-cells = <2>;
};
};
- dss_cm: dss_cm@1100 {
+ dss_cm: dss-cm@1100 {
compatible = "ti,omap4-cm";
reg = <0x1100 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1100 0x100>;
- dss_clkctrl: clk@20 {
+ dss_clkctrl: dss-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x14>;
#clock-cells = <2>;
};
};
- l3init_cm: l3init_cm@1300 {
+ l3init_cm: l3init-cm@1300 {
compatible = "ti,omap4-cm";
reg = <0x1300 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1300 0x100>;
- l3init_clkctrl: clk@20 {
+ l3init_clkctrl: l3init-clkctrl@20 {
+ compatible = "ti,clkctrl";
+ reg = <0x20 0x6c>, <0xe0 0x14>;
+ #clock-cells = <2>;
+ };
+
+ pcie_clkctrl: pcie-clkctrl@b0 {
+ compatible = "ti,clkctrl";
+ reg = <0xb0 0xc>;
+ #clock-cells = <2>;
+ };
+
+ gmac_clkctrl: gmac-clkctrl@d0 {
compatible = "ti,clkctrl";
- reg = <0x20 0xd4>;
+ reg = <0xd0 0x4>;
#clock-cells = <2>;
};
+
};
- l4per_cm: l4per_cm@1700 {
+ l4per_cm: l4per-cm@1700 {
compatible = "ti,omap4-cm";
reg = <0x1700 0x300>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1700 0x300>;
- l4per_clkctrl: clk@0 {
+ l4per_clkctrl: l4per-clkctrl@28 {
compatible = "ti,clkctrl";
- reg = <0x0 0x20c>;
+ reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
#clock-cells = <2>;
- assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
+ assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
assigned-clock-parents = <&abe_24m_fclk>;
};
+
+ l4sec_clkctrl: l4sec-clkctrl@1a0 {
+ compatible = "ti,clkctrl";
+ reg = <0x1a0 0x2c>;
+ #clock-cells = <2>;
+ };
+
+ l4per2_clkctrl: l4per2-clkctrl@c {
+ compatible = "ti,clkctrl";
+ reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
+ #clock-cells = <2>;
+ };
+
+ l4per3_clkctrl: l4per3-clkctrl@14 {
+ compatible = "ti,clkctrl";
+ reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
+ #clock-cells = <2>;
+ };
};
};
&prm {
- wkupaon_cm: wkupaon_cm@1800 {
+ wkupaon_cm: wkupaon-cm@1800 {
compatible = "ti,omap4-cm";
reg = <0x1800 0x100>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x1800 0x100>;
- wkupaon_clkctrl: clk@20 {
+ wkupaon_clkctrl: wkupaon-clkctrl@20 {
compatible = "ti,clkctrl";
reg = <0x20 0x6c>;
#clock-cells = <2>;
Convert DRA7xx to use the new clockdomain based layout. Previously the clkctrl split was based on CM isntance boundaries. The new layout helps with introducing the interconnect driver instances. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +- arch/arm/boot/dts/dra7-evm-common.dtsi | 4 +- arch/arm/boot/dts/dra7.dtsi | 76 +++++------ arch/arm/boot/dts/dra72-evm-common.dtsi | 4 +- arch/arm/boot/dts/dra72x.dtsi | 4 +- arch/arm/boot/dts/dra74x.dtsi | 6 +- arch/arm/boot/dts/dra76x.dtsi | 2 +- arch/arm/boot/dts/dra7xx-clocks.dtsi | 159 ++++++++++++++++++------ 8 files changed, 171 insertions(+), 86 deletions(-) -- 1.9.1 -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki