@@ -48,6 +48,10 @@
};
};
+&adsp_pas {
+ status = "okay";
+};
+
&apps_rsc {
pm8998-rpmh-regulators {
compatible = "qcom,pm8998-rpmh-regulators";
@@ -344,6 +348,10 @@
};
};
+&cdsp_pas {
+ status = "okay";
+};
+
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -330,6 +330,64 @@
};
};
+ adsp_pas: remoteproc-adsp {
+ compatible = "qcom,sdm845-adsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ mboxes = <&apss_shared 8>;
+ };
+ };
+
+ cdsp_pas: remoteproc-cdsp {
+ compatible = "qcom,sdm845-cdsp-pas";
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ memory-region = <&cdsp_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
+ label = "turing";
+ qcom,remote-pid = <5>;
+ mboxes = <&apss_shared 4>;
+ };
+ };
+
tcsr_mutex: hwlock {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_regs 0 0x1000>;
Add the Audio DSP (ADSP) and Compute DSP (CDSP) nodes for TrustZone based remoteproc, supporting booting these cores on e.g. the MTP, and enable the same for the MTP. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- Changes since v3: - Make xo reference the actual CXO clock arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 8 ++++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 58 +++++++++++++++++++++++++ 2 files changed, 66 insertions(+) -- 2.18.0