From patchwork Tue Nov 19 23:19:11 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mike Leach X-Patchwork-Id: 179818 Delivered-To: patch@linaro.org Received: by 2002:a92:38d5:0:0:0:0:0 with SMTP id g82csp1314949ilf; Tue, 19 Nov 2019 15:19:38 -0800 (PST) X-Google-Smtp-Source: APXvYqxs8w4j1zPJHbSsZ30V/VNCiyWmmOnM6AQI1+Fi4B9uD5+dBgBSqwP8o/nFOUI8OXWh9toT X-Received: by 2002:a17:906:a38d:: with SMTP id k13mr366243ejz.213.1574205578530; Tue, 19 Nov 2019 15:19:38 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1574205578; cv=none; d=google.com; s=arc-20160816; b=YXYb56nbZUkldQq8szhUuUtPFZZ3R9VwzZmIIvLPh3OXHwmlPLHpJTSwiytEkSis6a 47nRaERBvWV3lZJOCE7N+EZSkyR1kyoEZFc+BA2B8EBjv/Bm1xgVVcHiP1P0vErhIBOH u7EjBuLcEawSuHBlqMlWQbq1vLesPwME0CW1uoKTOHPcHKow6GavoMqyl0gUNrWovUjx AHC0PswOoRl6S/gTqxJ/ppBKyJYulBAk1obdhObh3ko/+ytPNy8AEJpQ6Oo372Kfg2sz 8xfsbAIhW/f1BFqMCkvblAJta9JuuuWhK1Qc/26500nJCYx1HMercb7X/drtGwPjeEOT ojlQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature; bh=+D37NIkKX+pRSTJ2wrFIBF9cOZPGjjvqmStorp3L1B0=; b=QYWX+KrFRdxZW0Rx2ZlopFPebaIU4OOT4riK+4zY21ULnF6gQEDDDj0tfZDsncP9qw Nbb0Pd7VaZAUUaarrq8iiU9iLAU9oHMWZUjoYQ8o+N6R57OfedH9LF5JJ1f/bZngdLYV wKMlwTUgO8zlTcpp/qC956fzqTVgcFemNJEkSZPN7pOWbqk0OULUGAx8rZ60XS4yfHoI pRl1CMS5cr93VMFX54IfpwTSwOgZD4Z8IKZcv+kwVHllBX2uXTzJq6vLxA0IgYrH4a4O NHDTtIabkQa+H6At+MZtuYl24ul/PyaAViDj2nhFu5s4Axm8LIHL/yGwP0KyL9Gz5ujA W79w== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=yEmurrRP; spf=pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id z26si14834172ejb.223.2019.11.19.15.19.38; Tue, 19 Nov 2019 15:19:38 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=yEmurrRP; spf=pass (google.com: best guess record for domain of devicetree-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726290AbfKSXTh (ORCPT + 8 others); Tue, 19 Nov 2019 18:19:37 -0500 Received: from mail-wm1-f65.google.com ([209.85.128.65]:53844 "EHLO mail-wm1-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727527AbfKSXTh (ORCPT ); Tue, 19 Nov 2019 18:19:37 -0500 Received: by mail-wm1-f65.google.com with SMTP id u18so5094681wmc.3 for ; Tue, 19 Nov 2019 15:19:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=+D37NIkKX+pRSTJ2wrFIBF9cOZPGjjvqmStorp3L1B0=; b=yEmurrRPv/1tYtj5OVA+YGN/BGcwMSC87OkbwOCVrzfbfjRN0pUZpB8Z0dkaS6SaEu uONfhB+twYfTn9cgStyWkBjjDuDSWgQSBmXpqK0swO5Fl0wQ24wMTcWYfWPnSdUAoDzi rgRw6xT3VIrEFvPhA9BY4ag1Y/Gvno8UWAl3oAr0WltrVw4IEt7IgWao0tuDXcx6Sept 1rfxCURtXv9SLZVg1obnY+WOnSALli2nUtw91hwyiUBRmopviqX922ywAYmOkQ2Mc8OD u2lIlRVCx36p5md5i3mzjicPRtGXEmi3HdUPJ9foqZuAAgXlYcQUXSaHaux98eUs7oW4 J4mg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=+D37NIkKX+pRSTJ2wrFIBF9cOZPGjjvqmStorp3L1B0=; b=Dk7GgNAMesEzveMcN4cbHp/gg9zVB7qtEi4BhJ3EwRFXmF63509Lx+4TM3tna22MDv N2lRfv2iEPnmCLWDmuKObqaU/PTcxr6tcigs6+VvD8K9VN1zNmMUd9qxR8V6MAOSpury 4u8I1QHk8/ypEnm8MgPr9xqX4qny4ef6gnGiVYKzmUt70bVMCyTxPjKiIgv0k1oDcro2 DDr6Y95ehXH/QCGHvdE4V8nxNVST+u+FPUGHrzQisefOAUeAWJdGmZsnZY8KuhX+F+VZ qiHPLOPY/bfEx865Jq7cxW8EZd7J9dbglxoY2xtoq+OK0otFqaEzf7W/5KQDckGgXVTN KlMg== X-Gm-Message-State: APjAAAVvvdxyRmPfCBA/80insUo7qtR23aHNq0lIePxL28Nfk7NcGOQq NGT5Dk0XKiB9NpTmON2vQhJksA== X-Received: by 2002:a1c:a5c8:: with SMTP id o191mr356585wme.168.1574205573003; Tue, 19 Nov 2019 15:19:33 -0800 (PST) Received: from linaro.org ([2a00:23c5:6815:3901:a19d:4139:292b:19a0]) by smtp.gmail.com with ESMTPSA id m15sm15746717wrj.52.2019.11.19.15.19.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Nov 2019 15:19:32 -0800 (PST) From: Mike Leach To: mike.leach@linaro.org, coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org Cc: mathieu.poirier@linaro.org, suzuki.poulose@arm.com Subject: [PATCH v5 13/14] docs: coresight: Update documentation for CoreSight to cover CTI. Date: Tue, 19 Nov 2019 23:19:11 +0000 Message-Id: <20191119231912.12768-14-mike.leach@linaro.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20191119231912.12768-1-mike.leach@linaro.org> References: <20191119231912.12768-1-mike.leach@linaro.org> Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add new document covering CTI / CTM usage in CoreSight. Add section in coresight.rst introducing CTI and CTM modules with link to new document. Signed-off-by: Mike Leach --- .../trace/coresight/coresight-ect.rst | 200 ++++++++++++++++++ Documentation/trace/coresight/coresight.rst | 13 ++ 2 files changed, 213 insertions(+) create mode 100644 Documentation/trace/coresight/coresight-ect.rst -- 2.17.1 Reviewed-by: Suzuki K Poulose diff --git a/Documentation/trace/coresight/coresight-ect.rst b/Documentation/trace/coresight/coresight-ect.rst new file mode 100644 index 000000000000..6448cf910f20 --- /dev/null +++ b/Documentation/trace/coresight/coresight-ect.rst @@ -0,0 +1,200 @@ +============================================= +CoreSight Embedded Cross Trigger (CTI & CTM). +============================================= + + :Author: Mike Leach + :Date: November 2019 + +Hardware Description +-------------------- + +The CoreSight Cross Trigger Interface (CTI) is a hardware device that takes +individual input and output hardware signals known as triggers to and from +devices and interconnects them via the Cross Trigger Matrix (CTM) to other +devices via numbered channels, in order to propagate events between devices. + +e.g.:: + + 0000000 in_trigs ::::::: + 0 C 0----------->: : +======>(other CTI channel IO) + 0 P 0<-----------: : v + 0 U 0 out_trigs : : Channels ***** ::::::: + 0000000 : CTI :<=========>*CTM*<====>: CTI :---+ + ####### in_trigs : : (id 0-3) ***** ::::::: v + # ETM #----------->: : ^ ####### + # #<-----------: : +---# ETR # + ####### out_trigs ::::::: ####### + +The CTI driver enables the programming of the CTI to attach triggers to +channels. When an input trigger becomes active, the attached channel will +become active. Any output trigger attached to that channel will also +become active. The active channel is propagated to other CTIs via the CTM, +activiating connected output triggers there, unless filtered by the CTI +channel gate. + +It is also possible to activate a channel using system software directly +programming registers in the CTI. + +The CTIs are registered by the system to be associated with CPUs and/or other +CoreSight devices on the trace data path. When these devices are enabled the +attached CTIs will also be enabled. By default/on power up the CTIs have +no programmed trigger/channel attachments, so will not affect the system +until explicitly programmed. + +The hardware trigger connections between CTIs and devices is implementation +defined, unless the CPU/ETM combination is a v8 architecture, in which case +the connections have an architecturally defined standard layout. + +The hardware trigger signals can also be connected to non-CoreSight devices +(e.g. UART), or be propagated off chip as hardware IO lines. + +All the CTI devices are associated with a CTM. On many systems there will be a +single effective CTM (one CTM, or multiple CTMs all interconnected), but it is +possible that systems can have nets of CTIs+CTM that are not interconnected by +a CTM to each other. On these systems a CTM index is declared to associate +CTI devices that are interconnected via a given CTM. + +Sysfs files and directories +--------------------------- + +The CTI devices appear on the existing CoreSight bus alongside the other +CoreSight devices:: + + >$ ls /sys/bus/coresight/devices + cti_cpu0 cti_cpu2 cti_sys0 etm0 etm2 funnel0 replicator0 tmc_etr0 + cti_cpu1 cti_cpu3 cti_sys1 etm1 etm3 funnel1 tmc_etf0 tpiu0 + +The ``cti_cpu`` named CTIs are associated with a CPU, and any ETM used by +that core. the ``cti_sys`` CTIs are general system infrastructure CTIs that +can be associated with other CoreSight devices, or other system hardware +capable of generating or using trigger signals.:: + + >$ ls /sys/bus/coresight/devices/etm0/cti_cpu0 + channels ctmid enable nr_trigger_cons mgmt power regs subsystem + triggers0 triggers1 uevent + +*Key file items are:-* + * ``enable``: enables/disables the CTI. + * ``ctmid`` : associated CTM - only relevant if system has multiple CTI+CTM + clusters that are not interconnected. + * ``nr_trigger_cons`` : total connections - triggers directories. + +*Sub-directories:-* + * ``triggers``: contains list of triggers for an individual connection. + * ``channels``: Contains the channel API - CTI main programming interface. + * ``regs``: Gives access to the raw programmable CTI regs. + * ``mgmt``: the standard CoreSight management registers. + + +triggers directories +~~~~~~~~~~~~~~~~~~~~~~~ + +Individual trigger connection information. This describes trigger signals for +CoreSight and non-CoreSight connections. + +Each triggers directory has a set of parameters describing the triggers for +the connection. + + * ``name`` : name of connection + * ``in_signals`` : input trigger signal indexes used in this connection. + * ``in_types`` : functional types for in signals. + * ``out_signals`` : output trigger signals for this connection. + * ``out_types`` : functional types for out signals. + +e.g:: + + >$ ls ./cti_cpu0/triggers0/ + in_signals in_types name out_signals out_types + >$ cat ./cti_cpu0/triggers0/name + cpu0 + >$ cat ./cti_cpu0/triggers0/out_signals + 0-2 + >$ cat ./cti_cpu0/triggers0/out_types + pe_edbgreq pe_dbgrestart pe_ctiirq + >$ cat ./cti_cpu0/triggers0/in_signals + 0-1 + >$ cat ./cti_cpu0/triggers0/in_types + pe_dbgtrigger pe_pmuirq + +If a connection has zero signals in either the 'in' or 'out' triggers then +those parameters will be omitted. + +Channels API Directory +~~~~~~~~~~~~~~~~~~~~~~ + +This provides an easy way to attach triggers to channels, without needing +the multiple register operations that are required if manipluating the +'regs' sub-dir elements directly. + +A number of files provide this API:: + + >$ ls ./cti_sys0/channels/ + chan_clear chan_inuse chan_xtrigs_view trigin_detach + chan_free chan_pulse chan_xtrigs_view_sel trigout_attach + chan_gate_disable chan_set trig_filter_enable trigout_detach + chan_gate_enable chan_xtrigs_reset trigin_attach trigout_filtered + +Most access to these elements take the form:: + + echo [] > // + +where the optional is only needed for trigXX_attach | detach +operations. + +e.g.:: + + >$ echo 0 1 > ./cti_sys0/channels/trigout_attach + >$ echo 0 > ./cti_sys0/channels/chan_set + +Attaches trigout(1) to channel(0), then activates channel(0) generating a +set state on cti_sys0.trigout(1) + + +*API operations* + + * ``trigin_attach, trigout_attach``: Attach a channel to a trigger signal. + * ``trigin_detach, trigout_detach``: Detach a channel from a trigger signal. + * ``chan_set``: Set the channel - the set state will be propogated around + the CTM to other connected devices. + * ``chan_clear``: Clear the channel. + * ``chan_pulse``: Set the channel for a single CoreSight clock cycle. + * ``chan_gate_enable``: Write operation sets the CTI gate to propagate + (enable) the channel to other devices. This operation takes a channel + number. CTI gate is enabled for all channels by default at power up. Read + to list the currently enabled channels on the gate. + * ``chan_gate_disable``: Write channel number to disable gate for that + channel. + * ``chan_inuse``: Show the current channels attached to any signal + * ``chan_free``: Show channels with no attached signals. + * ``chan_xtrig_view``: write a channel number to select a channel to view, + read to show the cross triggers programmed for the selected channel. + * ``trig_filter_enable``: Defaults to enabled, disable to allow potentially + dangerous output signals to be set. + * ``trigout_filtered``: Trigger out signals that are prevented from being + set if filtering ``trig_filter_enable`` is enabled. One use is to prevent + accidental ``EDBGREQ`` signals stopping a core. + * ``chan_xtrigs_reset``: Write 1 to clear all channel / trigger programming. + Resets device hardware to default state. + +e.g.:: + + .../cti_sys0/channels# echo 2 1 > trigin_attach + .../cti_sys0/channels# echo 2 6 > trigout_attach + .../cti_sys0/channels# cat chan_free + 0-1,3 + .../cti_sys0/channels# cat chan_inuse + 2 + .../cti_sys0/channels# echo 2 > chan_xtrigs_view + .../cti_sys0/channels# cat chan_xtrigs_view + [2] IN: 1 OUT: 6 + .../cti_sys0/# echo 1 > enable + .../cti_sys0/channels# echo 2 > chan_set + .../cti_sys0/channels# cat ../regs/choutstatus + 0x4 + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x40 + .../cti_sys0/channels# echo 2 > chan_clear + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x0 + .../cti_sys0/channels# cat ../regs/trigoutstatus + 0x0 diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst index a566719f8e7e..108600ee1e12 100644 --- a/Documentation/trace/coresight/coresight.rst +++ b/Documentation/trace/coresight/coresight.rst @@ -491,8 +491,21 @@ interface provided for that purpose by the generic STM API:: Details on how to use the generic STM API can be found here:- :doc:`../stm` [#second]_. +The CTI & CTM Modules +--------------------- + +The CTI (Cross Trigger Interface) provides a set of trigger signals between +individual CTIs and components, and can propagate these between all CTIs via +channels on the CTM (Cross Trigger Matrix). + +A separate documentation file is provided to explain the use of these devices. +(:doc:`coresight-ect`) [#fourth]_. + + .. [#first] Documentation/ABI/testing/sysfs-bus-coresight-devices-stm .. [#second] Documentation/trace/stm.rst .. [#third] https://github.com/Linaro/perf-opencsd + +.. [#fourth] Documentation/trace/coresight/coresight-ect.rst