diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index ae70ce29d5e4..3a7179e90f4e 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -441,6 +441,16 @@ config USB_GADGET_XILINX
 	  dynamically linked module called "udc-xilinx" and force all
 	  gadget drivers to also be dynamically linked.
 
+config USB_MAX3420_UDC
+	tristate "MAX3420 (USB-over-SPI) support"
+	depends on SPI
+	help
+	  The Maxim MAX3420 chip supports USB2.0 full-speed peripheral mode.
+	  The MAX3420 is run by SPI interface, and hence the dependency.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called max3420_udc
+
 config USB_TEGRA_XUDC
 	tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller"
 	depends on ARCH_TEGRA || COMPILE_TEST
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index f6777e654a8e..f5a7ce28aecd 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -42,3 +42,4 @@ obj-$(CONFIG_USB_GADGET_XILINX)	+= udc-xilinx.o
 obj-$(CONFIG_USB_SNP_UDC_PLAT) += snps_udc_plat.o
 obj-$(CONFIG_USB_ASPEED_VHUB)	+= aspeed-vhub/
 obj-$(CONFIG_USB_BDC_UDC)	+= bdc/
+obj-$(CONFIG_USB_MAX3420_UDC)	+= max3420_udc.o
diff --git a/drivers/usb/gadget/udc/max3420_udc.c b/drivers/usb/gadget/udc/max3420_udc.c
new file mode 100644
index 000000000000..2eee33e69f21
--- /dev/null
+++ b/drivers/usb/gadget/udc/max3420_udc.c
@@ -0,0 +1,1333 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MAX3420 Device Controller driver for USB.
+ *
+ * Author: Jaswinder Singh Brar <jaswinder.singh@linaro.org>
+ * (C) Copyright 2019 Linaro Ltd
+ *
+ * Based on:
+ *	o MAX3420E datasheet
+ *		http://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf
+ *	o MAX342{0,1}E Programming Guides
+ *		https://pdfserv.maximintegrated.com/en/an/AN3598.pdf
+ *		https://pdfserv.maximintegrated.com/en/an/AN3785.pdf
+ *
+ * This file is licenced under the GPL v2.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/bitfield.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/prefetch.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio/consumer.h>
+
+#define MAX3420_MAX_EPS		4
+#define MAX3420_EP_MAX_PACKET		64  /* Same for all Endpoints */
+#define MAX3420_EPNAME_SIZE		16  /* Buffer size for endpoint name */
+
+#define MAX3420_ACKSTAT		BIT(0)
+
+#define MAX3420_SPI_DIR_RD	0	/* read register from MAX3420 */
+#define MAX3420_SPI_DIR_WR	1	/* write register to MAX3420 */
+
+/* SPI commands: */
+#define MAX3420_SPI_DIR_SHIFT	1
+#define MAX3420_SPI_REG_SHIFT	3
+
+#define MAX3420_REG_EP0FIFO	0
+#define MAX3420_REG_EP1FIFO	1
+#define MAX3420_REG_EP2FIFO	2
+#define MAX3420_REG_EP3FIFO	3
+#define MAX3420_REG_SUDFIFO	4
+#define MAX3420_REG_EP0BC	5
+#define MAX3420_REG_EP1BC	6
+#define MAX3420_REG_EP2BC	7
+#define MAX3420_REG_EP3BC	8
+
+#define MAX3420_REG_EPSTALLS	9
+	#define ACKSTAT		BIT(6)
+	#define STLSTAT		BIT(5)
+	#define STLEP3IN	BIT(4)
+	#define STLEP2IN	BIT(3)
+	#define STLEP1OUT	BIT(2)
+	#define STLEP0OUT	BIT(1)
+	#define STLEP0IN	BIT(0)
+
+#define MAX3420_REG_CLRTOGS	10
+	#define EP3DISAB	BIT(7)
+	#define EP2DISAB	BIT(6)
+	#define EP1DISAB	BIT(5)
+	#define CTGEP3IN	BIT(4)
+	#define CTGEP2IN	BIT(3)
+	#define CTGEP1OUT	BIT(2)
+
+#define MAX3420_REG_EPIRQ	11
+#define MAX3420_REG_EPIEN	12
+	#define SUDAVIRQ	BIT(5)
+	#define IN3BAVIRQ	BIT(4)
+	#define IN2BAVIRQ	BIT(3)
+	#define OUT1DAVIRQ	BIT(2)
+	#define OUT0DAVIRQ	BIT(1)
+	#define IN0BAVIRQ	BIT(0)
+
+#define MAX3420_REG_USBIRQ	13
+#define MAX3420_REG_USBIEN	14
+	#define OSCOKIRQ	BIT(0)
+	#define RWUDNIRQ	BIT(1)
+	#define BUSACTIRQ	BIT(2)
+	#define URESIRQ		BIT(3)
+	#define SUSPIRQ		BIT(4)
+	#define NOVBUSIRQ	BIT(5)
+	#define VBUSIRQ		BIT(6)
+	#define URESDNIRQ	BIT(7)
+
+#define MAX3420_REG_USBCTL	15
+	#define HOSCSTEN	BIT(7)
+	#define VBGATE		BIT(6)
+	#define CHIPRES		BIT(5)
+	#define PWRDOWN		BIT(4)
+	#define CONNECT		BIT(3)
+	#define SIGRWU		BIT(2)
+
+#define MAX3420_REG_CPUCTL	16
+	#define IE		BIT(0)
+
+#define MAX3420_REG_PINCTL	17
+	#define EP3INAK		BIT(7)
+	#define EP2INAK		BIT(6)
+	#define EP0INAK		BIT(5)
+	#define FDUPSPI		BIT(4)
+	#define INTLEVEL	BIT(3)
+	#define POSINT		BIT(2)
+	#define GPXB		BIT(1)
+	#define GPXA		BIT(0)
+
+#define MAX3420_REG_REVISION	18
+
+#define MAX3420_REG_FNADDR	19
+	#define FNADDR_MASK	0x7f
+
+#define MAX3420_REG_IOPINS	20
+#define MAX3420_REG_IOPINS2	21
+#define MAX3420_REG_GPINIRQ	22
+#define MAX3420_REG_GPINIEN	23
+#define MAX3420_REG_GPINPOL	24
+#define MAX3420_REG_HIRQ	25
+#define MAX3420_REG_HIEN	26
+#define MAX3420_REG_MODE	27
+#define MAX3420_REG_PERADDR	28
+#define MAX3420_REG_HCTL	29
+#define MAX3420_REG_HXFR	30
+#define MAX3420_REG_HRSL	31
+
+#define ENABLE_IRQ	BIT(0)
+#define IOPIN_UPDATE	BIT(1)
+#define REMOTE_WAKEUP	BIT(2)
+#define CONNECT_HOST	GENMASK(4, 3)
+#define	HCONNECT	(1 << 3)
+#define	HDISCONNECT	(3 << 3)
+#define UDC_START	GENMASK(6, 5)
+#define	START		(1 << 5)
+#define	STOP		(3 << 5)
+#define ENABLE_EP	GENMASK(8, 7)
+#define	ENABLE		(1 << 7)
+#define	DISABLE		(3 << 7)
+#define STALL_EP	GENMASK(10, 9)
+#define	STALL		(1 << 9)
+#define	UNSTALL		(3 << 9)
+
+#define MAX3420_CMD(c)		FIELD_PREP(GENMASK(7, 3), c)
+#define MAX3420_SPI_CMD_RD(c)	(MAX3420_CMD(c) | (0 << 1))
+#define MAX3420_SPI_CMD_WR(c)	(MAX3420_CMD(c) | (1 << 1))
+
+struct max3420_req {
+	struct usb_request usb_req;
+	struct list_head queue;
+	struct max3420_ep *ep;
+};
+
+struct max3420_ep {
+	struct usb_ep ep_usb;
+	struct max3420_udc *udc;
+	struct list_head queue;
+	char name[MAX3420_EPNAME_SIZE];
+	unsigned int maxpacket;
+	spinlock_t lock;
+	int halted;
+	u32 todo;
+	int id;
+};
+
+struct max3420_udc {
+	struct usb_gadget gadget;
+	struct max3420_ep ep[MAX3420_MAX_EPS];
+	struct usb_gadget_driver *driver;
+	struct task_struct *thread_task;
+	int remote_wkp, is_selfpowered;
+	bool vbus_active, softconnect;
+	struct usb_ctrlrequest setup;
+	struct mutex spi_bus_mutex;
+	struct max3420_req ep0req;
+	struct spi_device *spi;
+	struct device *dev;
+	spinlock_t lock;
+	bool suspended;
+	u8 ep0buf[64];
+	u32 todo;
+};
+
+#define to_max3420_req(r)	container_of((r), struct max3420_req, usb_req)
+#define to_max3420_ep(e)	container_of((e), struct max3420_ep, ep_usb)
+#define to_udc(g)		container_of((g), struct max3420_udc, gadget)
+
+#define DRIVER_DESC     "MAX3420 USB Device-Mode Driver"
+static const char driver_name[] = "max3420-udc";
+
+/* Control endpoint configuration.*/
+static const struct usb_endpoint_descriptor ep0_desc = {
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize		= cpu_to_le16(MAX3420_EP_MAX_PACKET),
+};
+
+static void spi_ack_ctrl(struct max3420_udc *udc)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 txdata[1];
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	txdata[0] = MAX3420_ACKSTAT;
+	transfer.tx_buf = txdata;
+	transfer.len = 1;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+}
+
+static u8 spi_rd8_ack(struct max3420_udc *udc, u8 reg, int actstat)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 txdata[2], rxdata[2];
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	txdata[0] = MAX3420_SPI_CMD_RD(reg) | (actstat ? MAX3420_ACKSTAT : 0);
+	transfer.tx_buf = txdata;
+	transfer.rx_buf = rxdata;
+	transfer.len = 2;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+
+	return rxdata[1];
+}
+
+static u8 spi_rd8(struct max3420_udc *udc, u8 reg)
+{
+	return spi_rd8_ack(udc, reg, 0);
+}
+
+static void spi_wr8_ack(struct max3420_udc *udc, u8 reg, u8 val, int actstat)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 txdata[2];
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	txdata[0] = MAX3420_SPI_CMD_WR(reg) | (actstat ? MAX3420_ACKSTAT : 0);
+	txdata[1] = val;
+
+	transfer.tx_buf = txdata;
+	transfer.len = 2;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+}
+
+static void spi_wr8(struct max3420_udc *udc, u8 reg, u8 val)
+{
+	spi_wr8_ack(udc, reg, val, 0);
+}
+
+static void spi_rd_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 local_buf[MAX3420_EP_MAX_PACKET + 1] = {};
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	local_buf[0] = MAX3420_SPI_CMD_RD(reg);
+	transfer.tx_buf = &local_buf[0];
+	transfer.rx_buf = &local_buf[0];
+	transfer.len = len + 1;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+
+	memcpy(buf, &local_buf[1], len);
+}
+
+static void spi_wr_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len)
+{
+	struct spi_device *spi = udc->spi;
+	struct spi_transfer transfer;
+	struct spi_message msg;
+	u8 local_buf[MAX3420_EP_MAX_PACKET + 1] = {};
+
+	memset(&transfer, 0, sizeof(transfer));
+
+	spi_message_init(&msg);
+
+	local_buf[0] = MAX3420_SPI_CMD_WR(reg);
+	memcpy(&local_buf[1], buf, len);
+
+	transfer.tx_buf = local_buf;
+	transfer.len = len + 1;
+
+	spi_message_add_tail(&transfer, &msg);
+	spi_sync(spi, &msg);
+}
+
+static int spi_max3420_enable(struct max3420_ep *ep)
+{
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+	u8 epdis, epien;
+	int todo;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	todo = ep->todo & ENABLE_EP;
+	ep->todo &= ~ENABLE_EP;
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	if (!todo || ep->id == 0)
+		return false;
+
+	epien = spi_rd8(udc, MAX3420_REG_EPIEN);
+	epdis = spi_rd8(udc, MAX3420_REG_CLRTOGS);
+
+	if (todo == ENABLE) {
+		epdis &= ~BIT(ep->id + 4);
+		epien |= BIT(ep->id + 1);
+	} else {
+		epdis |= BIT(ep->id + 4);
+		epien &= ~BIT(ep->id + 1);
+	}
+
+	spi_wr8(udc, MAX3420_REG_CLRTOGS, epdis);
+	spi_wr8(udc, MAX3420_REG_EPIEN, epien);
+
+	return true;
+}
+
+static int spi_max3420_stall(struct max3420_ep *ep)
+{
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+	u8 epstalls;
+	int todo;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	todo = ep->todo & STALL_EP;
+	ep->todo &= ~STALL_EP;
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	if (!todo || ep->id == 0)
+		return false;
+
+	epstalls = spi_rd8(udc, MAX3420_REG_EPSTALLS);
+	if (todo == STALL) {
+		ep->halted = 1;
+		epstalls |= BIT(ep->id + 1);
+	} else {
+		u8 clrtogs;
+
+		ep->halted = 0;
+		epstalls &= ~BIT(ep->id + 1);
+		clrtogs = spi_rd8(udc, MAX3420_REG_CLRTOGS);
+		clrtogs |= BIT(ep->id + 1);
+		spi_wr8(udc, MAX3420_REG_CLRTOGS, clrtogs);
+	}
+	spi_wr8(udc, MAX3420_REG_EPSTALLS, epstalls | ACKSTAT);
+
+	return true;
+}
+
+static int spi_max3420_rwkup(struct max3420_udc *udc)
+{
+	unsigned long flags;
+	int wake_remote;
+	u8 usbctl;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	wake_remote = udc->todo & REMOTE_WAKEUP;
+	udc->todo &= ~REMOTE_WAKEUP;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (!wake_remote || !udc->suspended)
+		return false;
+
+	/* Set Remote-WkUp Signal*/
+	usbctl = spi_rd8(udc, MAX3420_REG_USBCTL);
+	usbctl |= SIGRWU;
+	spi_wr8(udc, MAX3420_REG_USBCTL, usbctl);
+
+	msleep_interruptible(5);
+
+	/* Clear Remote-WkUp Signal*/
+	usbctl = spi_rd8(udc, MAX3420_REG_USBCTL);
+	usbctl &= ~SIGRWU;
+	spi_wr8(udc, MAX3420_REG_USBCTL, usbctl);
+
+	udc->suspended = false;
+
+	return true;
+}
+
+static void max3420_nuke(struct max3420_ep *ep, int status);
+static void __max3420_stop(struct max3420_udc *udc)
+{
+	u8 val;
+	int i;
+
+	/* clear all pending requests */
+	for (i = 1; i < MAX3420_MAX_EPS; i++)
+		max3420_nuke(&udc->ep[i], -ECONNRESET);
+
+	/* Disable IRQ to CPU */
+	spi_wr8(udc, MAX3420_REG_CPUCTL, 0);
+
+	val = spi_rd8(udc, MAX3420_REG_USBCTL);
+	val |= PWRDOWN;
+	if (udc->is_selfpowered)
+		val &= ~HOSCSTEN;
+	else
+		val |= HOSCSTEN;
+	spi_wr8(udc, MAX3420_REG_USBCTL, val);
+}
+
+static void __max3420_start(struct max3420_udc *udc)
+{
+	u8 val;
+
+	/* Need this delay if bus-powered,
+	 * but even for self-powered it helps stability
+	 */
+	msleep_interruptible(250);
+
+	/* configure SPI */
+	spi_wr8(udc, MAX3420_REG_PINCTL, FDUPSPI);
+
+	/* Chip Reset */
+	spi_wr8(udc, MAX3420_REG_USBCTL, CHIPRES);
+	msleep_interruptible(5);
+	spi_wr8(udc, MAX3420_REG_USBCTL, 0);
+
+	/* Poll for OSC to stabilize */
+	while (1) {
+		val = spi_rd8(udc, MAX3420_REG_USBIRQ);
+		if (val & OSCOKIRQ)
+			break;
+		cond_resched();
+	}
+
+	/* Enable PULL-UP only when Vbus detected */
+	val = spi_rd8(udc, MAX3420_REG_USBCTL);
+	val |= VBGATE | CONNECT;
+	spi_wr8(udc, MAX3420_REG_USBCTL, val);
+
+	val = URESDNIRQ | URESIRQ;
+	if (udc->is_selfpowered)
+		val |= NOVBUSIRQ;
+	spi_wr8(udc, MAX3420_REG_USBIEN, val);
+
+	/* Enable only EP0 interrupts */
+	val = IN0BAVIRQ | OUT0DAVIRQ | SUDAVIRQ;
+	spi_wr8(udc, MAX3420_REG_EPIEN, val);
+
+	/* Enable IRQ to CPU */
+	spi_wr8(udc, MAX3420_REG_CPUCTL, IE);
+}
+
+static int max3420_start(struct max3420_udc *udc)
+{
+	unsigned long flags;
+	int todo;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	todo = udc->todo & UDC_START;
+	udc->todo &= ~UDC_START;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (!todo)
+		return false;
+
+	if (udc->vbus_active && udc->softconnect)
+		__max3420_start(udc);
+	else
+		__max3420_stop(udc);
+
+	return true;
+}
+
+static irqreturn_t max3420_vbus_handler(int irq, void *dev_id)
+{
+	struct max3420_udc *udc = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* its a vbus change interrupt */
+	udc->vbus_active = !udc->vbus_active;
+	udc->todo |= UDC_START;
+	usb_udc_vbus_handler(&udc->gadget, udc->vbus_active);
+	usb_gadget_set_state(&udc->gadget, udc->vbus_active
+			     ? USB_STATE_POWERED : USB_STATE_NOTATTACHED);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task &&
+	    udc->thread_task->state != TASK_RUNNING)
+		wake_up_process(udc->thread_task);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t max3420_irq_handler(int irq, void *dev_id)
+{
+	struct max3420_udc *udc = dev_id;
+	struct spi_device *spi = udc->spi;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	if ((udc->todo & ENABLE_IRQ) == 0) {
+		disable_irq_nosync(spi->irq);
+		udc->todo |= ENABLE_IRQ;
+	}
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task &&
+	    udc->thread_task->state != TASK_RUNNING)
+		wake_up_process(udc->thread_task);
+
+	return IRQ_HANDLED;
+}
+
+static void max3420_getstatus(struct max3420_udc *udc)
+{
+	struct max3420_ep *ep;
+	u16 status = 0;
+
+	switch (udc->setup.bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		/* Get device status */
+		status = udc->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED;
+		status |= (udc->remote_wkp << USB_DEVICE_REMOTE_WAKEUP);
+		break;
+	case USB_RECIP_INTERFACE:
+		if (udc->driver->setup(&udc->gadget, &udc->setup) < 0)
+			goto stall;
+		break;
+	case USB_RECIP_ENDPOINT:
+		ep = &udc->ep[udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK];
+		if (udc->setup.wIndex & USB_DIR_IN) {
+			if (!ep->ep_usb.caps.dir_in)
+				goto stall;
+		} else {
+			if (!ep->ep_usb.caps.dir_out)
+				goto stall;
+		}
+		if (ep->halted)
+			status = 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		goto stall;
+	}
+
+	status = cpu_to_le16(status);
+	spi_wr_buf(udc, MAX3420_REG_EP0FIFO, &status, 2);
+	spi_wr8_ack(udc, MAX3420_REG_EP0BC, 2, 1);
+	return;
+stall:
+	dev_err(udc->dev, "Can't respond to getstatus request\n");
+	spi_wr8(udc, MAX3420_REG_EPSTALLS, STLEP0IN | STLEP0OUT | STLSTAT);
+}
+
+static void max3420_set_clear_feature(struct max3420_udc *udc)
+{
+	struct max3420_ep *ep;
+	int set = udc->setup.bRequest == USB_REQ_SET_FEATURE;
+	unsigned long flags;
+	int id;
+
+	switch (udc->setup.bRequestType) {
+	case USB_RECIP_DEVICE:
+		if (udc->setup.wValue != USB_DEVICE_REMOTE_WAKEUP)
+			break;
+
+		if (udc->setup.bRequest == USB_REQ_SET_FEATURE)
+			udc->remote_wkp = 1;
+		else
+			udc->remote_wkp = 0;
+
+		return spi_ack_ctrl(udc);
+
+	case USB_RECIP_ENDPOINT:
+		if (udc->setup.wValue != USB_ENDPOINT_HALT)
+			break;
+
+		id = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+		ep = &udc->ep[id];
+
+		spin_lock_irqsave(&ep->lock, flags);
+		ep->todo &= ~STALL_EP;
+		if (set)
+			ep->todo |= STALL;
+		else
+			ep->todo |= UNSTALL;
+		spin_unlock_irqrestore(&ep->lock, flags);
+
+		spi_max3420_stall(ep);
+		return;
+	default:
+		break;
+	}
+
+	dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n");
+	spi_wr8(udc, MAX3420_REG_EPSTALLS, STLEP0IN | STLEP0OUT | STLSTAT);
+}
+
+static void max3420_handle_setup(struct max3420_udc *udc)
+{
+	struct usb_ctrlrequest setup;
+	u8 addr;
+
+	spi_rd_buf(udc, MAX3420_REG_SUDFIFO, (void *)&setup, 8);
+
+	udc->setup = setup;
+	udc->setup.wValue = cpu_to_le16(setup.wValue);
+	udc->setup.wIndex = cpu_to_le16(setup.wIndex);
+	udc->setup.wLength = cpu_to_le16(setup.wLength);
+
+	switch (udc->setup.bRequest) {
+	case USB_REQ_GET_STATUS:
+		/* Data+Status phase form udc */
+		if ((udc->setup.bRequestType &
+				(USB_DIR_IN | USB_TYPE_MASK)) !=
+				(USB_DIR_IN | USB_TYPE_STANDARD)) {
+			break;
+		}
+		return max3420_getstatus(udc);
+	case USB_REQ_SET_ADDRESS:
+		/* Status phase from udc */
+		if (udc->setup.bRequestType != (USB_DIR_OUT |
+				USB_TYPE_STANDARD | USB_RECIP_DEVICE)) {
+			break;
+		}
+		addr = spi_rd8_ack(udc, MAX3420_REG_FNADDR, 1);
+		dev_dbg(udc->dev, "Assigned Address=%d\n", udc->setup.wValue);
+		return;
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		/* Requests with no data phase, status phase from udc */
+		if ((udc->setup.bRequestType & USB_TYPE_MASK)
+				!= USB_TYPE_STANDARD)
+			break;
+		return max3420_set_clear_feature(udc);
+	default:
+		break;
+	}
+
+	if (udc->driver->setup(&udc->gadget, &setup) < 0) {
+		/* Stall EP0 */
+		spi_wr8(udc, MAX3420_REG_EPSTALLS,
+			STLEP0IN | STLEP0OUT | STLSTAT);
+	}
+}
+
+static void max3420_req_done(struct max3420_req *req, int status)
+{
+	struct max3420_ep *ep = req->ep;
+	struct max3420_udc *udc = ep->udc;
+
+	if (req->usb_req.status == -EINPROGRESS)
+		req->usb_req.status = status;
+	else
+		status = req->usb_req.status;
+
+	if (status && status != -ESHUTDOWN)
+		dev_err(udc->dev, "%s done %p, status %d\n",
+			ep->ep_usb.name, req, status);
+
+	if (req->usb_req.complete)
+		req->usb_req.complete(&ep->ep_usb, &req->usb_req);
+}
+
+static int max3420_do_data(struct max3420_udc *udc, int ep_id, int in)
+{
+	struct max3420_ep *ep = &udc->ep[ep_id];
+	struct max3420_req *req;
+	int done, length, psz;
+	void *buf;
+
+	if (list_empty(&ep->queue))
+		return false;
+
+	req = list_first_entry(&ep->queue, struct max3420_req, queue);
+	buf = req->usb_req.buf + req->usb_req.actual;
+
+	psz = ep->ep_usb.maxpacket;
+	length = req->usb_req.length - req->usb_req.actual;
+	length = min(length, psz);
+
+	if (length == 0) {
+		done = 1;
+		goto xfer_done;
+	}
+
+	done = 0;
+	if (in) {
+		prefetch(buf);
+		spi_wr_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length);
+		spi_wr8(udc, MAX3420_REG_EP0BC + ep_id, length);
+		if (length < psz)
+			done = 1;
+	} else {
+		psz = spi_rd8(udc, MAX3420_REG_EP0BC + ep_id);
+		length = min(length, psz);
+		prefetchw(buf);
+		spi_rd_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length);
+		if (length < ep->ep_usb.maxpacket)
+			done = 1;
+	}
+
+	req->usb_req.actual += length;
+
+	if (req->usb_req.actual == req->usb_req.length)
+		done = 1;
+
+xfer_done:
+	if (done) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&ep->lock, flags);
+		list_del_init(&req->queue);
+		spin_unlock_irqrestore(&ep->lock, flags);
+
+		if (ep_id == 0)
+			spi_ack_ctrl(udc);
+
+		max3420_req_done(req, 0);
+	}
+
+	return true;
+}
+
+static int max3420_handle_irqs(struct max3420_udc *udc)
+{
+	u8 epien, epirq, usbirq, usbien, reg[4];
+	bool ret = false;
+
+	spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 4);
+	epirq = reg[0];
+	epien = reg[1];
+	usbirq = reg[2];
+	usbien = reg[3];
+
+	usbirq &= usbien;
+	epirq &= epien;
+
+	if (epirq & SUDAVIRQ) {
+		spi_wr8(udc, MAX3420_REG_EPIRQ, SUDAVIRQ);
+		max3420_handle_setup(udc);
+		return true;
+	}
+
+	if (usbirq & VBUSIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, VBUSIRQ);
+		dev_dbg(udc->dev, "Cable plugged in\n");
+		return true;
+	}
+
+	if (usbirq & NOVBUSIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, NOVBUSIRQ);
+		dev_dbg(udc->dev, "Cable pulled out\n");
+		return true;
+	}
+
+	if (usbirq & URESIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, URESIRQ);
+		dev_dbg(udc->dev, "USB Reset - Start\n");
+		return true;
+	}
+
+	if (usbirq & URESDNIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, URESDNIRQ);
+		dev_dbg(udc->dev, "USB Reset - END\n");
+		spi_wr8(udc, MAX3420_REG_USBIEN, URESDNIRQ | URESIRQ);
+		spi_wr8(udc, MAX3420_REG_EPIEN, SUDAVIRQ | IN0BAVIRQ
+			| OUT0DAVIRQ);
+		return true;
+	}
+
+	if (usbirq & SUSPIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, SUSPIRQ);
+		dev_dbg(udc->dev, "USB Suspend - Enter\n");
+		udc->suspended = true;
+		return true;
+	}
+
+	if (usbirq & BUSACTIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, BUSACTIRQ);
+		dev_dbg(udc->dev, "USB Suspend - Exit\n");
+		udc->suspended = false;
+		return true;
+	}
+
+	if (usbirq & RWUDNIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, RWUDNIRQ);
+		dev_dbg(udc->dev, "Asked Host to wakeup\n");
+		return true;
+	}
+
+	if (usbirq & OSCOKIRQ) {
+		spi_wr8(udc, MAX3420_REG_USBIRQ, OSCOKIRQ);
+		dev_dbg(udc->dev, "Osc stabilized, start work\n");
+		return true;
+	}
+
+	if (epirq & OUT0DAVIRQ && max3420_do_data(udc, 0, 0)) {
+		spi_wr8_ack(udc, MAX3420_REG_EPIRQ, OUT0DAVIRQ, 1);
+		ret = true;
+	}
+
+	if (epirq & IN0BAVIRQ && max3420_do_data(udc, 0, 1))
+		ret = true;
+
+	if (epirq & OUT1DAVIRQ && max3420_do_data(udc, 1, 0)) {
+		spi_wr8_ack(udc, MAX3420_REG_EPIRQ, OUT1DAVIRQ, 1);
+		ret = true;
+	}
+
+	if (epirq & IN2BAVIRQ && max3420_do_data(udc, 2, 1))
+		ret = true;
+
+	if (epirq & IN3BAVIRQ && max3420_do_data(udc, 3, 1))
+		ret = true;
+
+	return ret;
+}
+
+static int max3420_thread(void *dev_id)
+{
+	struct max3420_udc *udc = dev_id;
+	struct spi_device *spi = udc->spi;
+	int i, loop_again = 1;
+	unsigned long flags;
+
+	while (!kthread_should_stop()) {
+		if (!loop_again) {
+			ktime_t kt = ns_to_ktime(1000 * 1000 * 250); /* 250ms */
+
+			set_current_state(TASK_INTERRUPTIBLE);
+
+			spin_lock_irqsave(&udc->lock, flags);
+			if (udc->todo & ENABLE_IRQ) {
+				enable_irq(spi->irq);
+				udc->todo &= ~ENABLE_IRQ;
+			}
+			spin_unlock_irqrestore(&udc->lock, flags);
+
+			schedule_hrtimeout(&kt, HRTIMER_MODE_REL);
+		}
+		loop_again = 0;
+
+		mutex_lock(&udc->spi_bus_mutex);
+
+		/* If bus-vbus_active and disconnected */
+		if (!udc->vbus_active || !udc->softconnect)
+			goto loop;
+
+		if (max3420_start(udc)) {
+			loop_again = 1;
+			goto loop;
+		}
+
+		if (max3420_handle_irqs(udc)) {
+			loop_again = 1;
+			goto loop;
+		}
+
+		if (spi_max3420_rwkup(udc)) {
+			loop_again = 1;
+			goto loop;
+		}
+
+		max3420_do_data(udc, 0, 1); /* get done with the EP0 ZLP */
+
+		for (i = 1; i < MAX3420_MAX_EPS; i++) {
+			struct max3420_ep *ep = &udc->ep[i];
+
+			if (spi_max3420_enable(ep))
+				loop_again = 1;
+			if (spi_max3420_stall(ep))
+				loop_again = 1;
+		}
+loop:
+		mutex_unlock(&udc->spi_bus_mutex);
+	}
+
+	set_current_state(TASK_RUNNING);
+	dev_info(udc->dev, "SPI thread exiting");
+	return 0;
+}
+
+static int max3420_ep_set_halt(struct usb_ep *_ep, int stall)
+{
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	ep->todo &= ~STALL_EP;
+	if (stall)
+		ep->todo |= STALL;
+	else
+		ep->todo |= UNSTALL;
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	wake_up_process(udc->thread_task);
+
+	dev_dbg(udc->dev, "%sStall %s\n", stall ? "" : "Un", ep->name);
+	return 0;
+}
+
+static int __max3420_ep_enable(struct max3420_ep *ep,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	unsigned int maxp = usb_endpoint_maxp(desc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	ep->ep_usb.desc = desc;
+	ep->ep_usb.maxpacket = maxp;
+
+	ep->todo &= ~ENABLE_EP;
+	ep->todo |= ENABLE;
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	return 0;
+}
+
+static int max3420_ep_enable(struct usb_ep *_ep,
+			     const struct usb_endpoint_descriptor *desc)
+{
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	struct max3420_udc *udc = ep->udc;
+
+	__max3420_ep_enable(ep, desc);
+
+	wake_up_process(udc->thread_task);
+
+	return 0;
+}
+
+static void max3420_nuke(struct max3420_ep *ep, int status)
+{
+	struct max3420_req *req, *r;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	list_for_each_entry_safe(req, r, &ep->queue, queue) {
+		list_del_init(&req->queue);
+
+		spin_unlock_irqrestore(&ep->lock, flags);
+		max3420_req_done(req, status);
+		spin_lock_irqsave(&ep->lock, flags);
+	}
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+}
+
+static void __max3420_ep_disable(struct max3420_ep *ep)
+{
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	ep->ep_usb.desc = NULL;
+
+	ep->todo &= ~ENABLE_EP;
+	ep->todo |= DISABLE;
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	dev_dbg(udc->dev, "Disabled %s\n", ep->name);
+}
+
+static int max3420_ep_disable(struct usb_ep *_ep)
+{
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	struct max3420_udc *udc = ep->udc;
+
+	max3420_nuke(ep, -ESHUTDOWN);
+
+	__max3420_ep_disable(ep);
+
+	wake_up_process(udc->thread_task);
+
+	return 0;
+}
+
+static struct usb_request *max3420_alloc_request(struct usb_ep *_ep,
+						 gfp_t gfp_flags)
+{
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	struct max3420_req *req;
+
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->ep = ep;
+
+	return &req->usb_req;
+}
+
+static void max3420_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	kfree(to_max3420_req(_req));
+}
+
+static int max3420_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			    gfp_t ignored)
+{
+	struct max3420_req *req = to_max3420_req(_req);
+	struct max3420_ep *ep  = to_max3420_ep(_ep);
+	struct max3420_udc *udc = ep->udc;
+	unsigned long flags;
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	spin_lock_irqsave(&ep->lock, flags);
+	list_add_tail(&req->queue, &ep->queue);
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	wake_up_process(udc->thread_task);
+	return 0;
+}
+
+static int max3420_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct max3420_req *t, *req = to_max3420_req(_req);
+	struct max3420_ep *ep = to_max3420_ep(_ep);
+	unsigned long flags;
+
+	spin_lock_irqsave(&ep->lock, flags);
+
+	/* Pluck the descriptor from queue */
+	list_for_each_entry(t, &ep->queue, queue)
+		if (t == req) {
+			list_del_init(&req->queue);
+			break;
+		}
+
+	spin_unlock_irqrestore(&ep->lock, flags);
+
+	if (t == req)
+		max3420_req_done(req, -ECONNRESET);
+
+	return 0;
+}
+
+static const struct usb_ep_ops max3420_ep_ops = {
+	.enable		= max3420_ep_enable,
+	.disable	= max3420_ep_disable,
+	.alloc_request	= max3420_alloc_request,
+	.free_request	= max3420_free_request,
+	.queue		= max3420_ep_queue,
+	.dequeue	= max3420_ep_dequeue,
+	.set_halt	= max3420_ep_set_halt,
+};
+
+static int max3420_wakeup(struct usb_gadget *gadget)
+{
+	struct max3420_udc *udc = to_udc(gadget);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Only if wakeup allowed by host */
+	if (udc->remote_wkp) {
+		udc->todo |= REMOTE_WAKEUP;
+		ret = 0;
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task &&
+	    udc->thread_task->state != TASK_RUNNING)
+		wake_up_process(udc->thread_task);
+	return ret;
+}
+
+static int max3420_udc_start(struct usb_gadget *gadget,
+			     struct usb_gadget_driver *driver)
+{
+	struct max3420_udc *udc = to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* hook up the driver */
+	driver->driver.bus = NULL;
+	udc->driver = driver;
+	udc->gadget.speed = USB_SPEED_FULL;
+
+	udc->gadget.is_selfpowered = udc->is_selfpowered;
+	udc->remote_wkp = 0;
+	udc->softconnect = true;
+	udc->todo |= UDC_START;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task &&
+	    udc->thread_task->state != TASK_RUNNING)
+		wake_up_process(udc->thread_task);
+
+	return 0;
+}
+
+static int max3420_udc_stop(struct usb_gadget *gadget)
+{
+	struct max3420_udc *udc = to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	udc->is_selfpowered = udc->gadget.is_selfpowered;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->driver = NULL;
+	udc->softconnect = false;
+	udc->todo |= UDC_START;
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	if (udc->thread_task &&
+	    udc->thread_task->state != TASK_RUNNING)
+		wake_up_process(udc->thread_task);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops max3420_udc_ops = {
+	.udc_start	= max3420_udc_start,
+	.udc_stop	= max3420_udc_stop,
+	.wakeup		= max3420_wakeup,
+};
+
+static void max3420_eps_init(struct max3420_udc *udc)
+{
+	int idx;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	for (idx = 0; idx < MAX3420_MAX_EPS; idx++) {
+		struct max3420_ep *ep = &udc->ep[idx];
+
+		spin_lock_init(&ep->lock);
+		INIT_LIST_HEAD(&ep->queue);
+
+		ep->udc = udc;
+		ep->id = idx;
+		ep->halted = 0;
+		ep->maxpacket = 0;
+		ep->ep_usb.name = ep->name;
+		ep->ep_usb.ops = &max3420_ep_ops;
+		usb_ep_set_maxpacket_limit(&ep->ep_usb, MAX3420_EP_MAX_PACKET);
+
+		if (idx == 0) { /* For EP0 */
+			ep->ep_usb.desc = &ep0_desc;
+			ep->ep_usb.maxpacket = usb_endpoint_maxp(&ep0_desc);
+			ep->ep_usb.caps.type_control = true;
+			ep->ep_usb.caps.dir_in = true;
+			ep->ep_usb.caps.dir_out = true;
+			snprintf(ep->name, MAX3420_EPNAME_SIZE, "ep0");
+			continue;
+		}
+
+		if (idx == 1) { /* EP1 is OUT */
+			ep->ep_usb.caps.dir_in = false;
+			ep->ep_usb.caps.dir_out = true;
+			snprintf(ep->name, MAX3420_EPNAME_SIZE, "ep1-bulk-out");
+		} else { /* EP2 & EP3 are IN */
+			ep->ep_usb.caps.dir_in = true;
+			ep->ep_usb.caps.dir_out = false;
+			snprintf(ep->name, MAX3420_EPNAME_SIZE,
+				 "ep%d-bulk-in", idx);
+		}
+		ep->ep_usb.caps.type_iso = false;
+		ep->ep_usb.caps.type_int = false;
+		ep->ep_usb.caps.type_bulk = true;
+
+		list_add_tail(&ep->ep_usb.ep_list,
+			      &udc->gadget.ep_list);
+	}
+}
+
+static int max3420_probe(struct spi_device *spi)
+{
+	struct max3420_udc *udc;
+	int err, irq;
+	u8 reg[8];
+
+	if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) {
+		dev_err(&spi->dev, "UDC needs full duplex to work\n");
+		return -EINVAL;
+	}
+
+	spi->mode = SPI_MODE_3;
+	spi->bits_per_word = 8;
+
+	err = spi_setup(spi);
+	if (err) {
+		dev_err(&spi->dev, "Unable to setup SPI bus\n");
+		return -EFAULT;
+	}
+
+	udc = devm_kzalloc(&spi->dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	udc->spi = spi;
+
+	udc->remote_wkp = 0;
+
+	/* Setup gadget structure */
+	udc->gadget.ops = &max3420_udc_ops;
+	udc->gadget.max_speed = USB_SPEED_FULL;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.ep0 = &udc->ep[0].ep_usb;
+	udc->gadget.name = driver_name;
+
+	spin_lock_init(&udc->lock);
+	mutex_init(&udc->spi_bus_mutex);
+
+	udc->ep0req.ep = &udc->ep[0];
+	udc->ep0req.usb_req.buf = udc->ep0buf;
+	INIT_LIST_HEAD(&udc->ep0req.queue);
+
+	/* setup Endpoints */
+	max3420_eps_init(udc);
+
+	/* configure SPI */
+	spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8);
+	spi_wr8(udc, MAX3420_REG_PINCTL, FDUPSPI);
+
+	err = usb_add_gadget_udc(&spi->dev, &udc->gadget);
+	if (err)
+		return err;
+
+	udc->dev = &udc->gadget.dev;
+
+	spi_set_drvdata(spi, udc);
+
+	irq = of_irq_get_byname(spi->dev.of_node, "udc");
+	err = devm_request_irq(&spi->dev, irq, max3420_irq_handler, 0,
+			       "max3420", udc);
+	if (err < 0)
+		return err;
+
+	udc->thread_task = kthread_create(max3420_thread, udc,
+					  "max3420-thread");
+	if (IS_ERR(udc->thread_task))
+		return PTR_ERR(udc->thread_task);
+
+	irq = of_irq_get_byname(spi->dev.of_node, "vbus");
+	if (irq <= 0) { /* no vbus irq implies self-powered design */
+		udc->is_selfpowered = 1;
+		udc->vbus_active = true;
+		udc->todo |= UDC_START;
+		usb_udc_vbus_handler(&udc->gadget, udc->vbus_active);
+		usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED);
+		max3420_start(udc);
+	} else {
+		udc->is_selfpowered = 0;
+		/* Detect current vbus status */
+		spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8);
+		if (reg[7] != 0xff)
+			udc->vbus_active = true;
+
+		err = devm_request_irq(&spi->dev, irq,
+				       max3420_vbus_handler, 0, "vbus", udc);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
+static int max3420_remove(struct spi_device *spi)
+{
+	struct max3420_udc *udc = spi_get_drvdata(spi);
+	unsigned long flags;
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	kthread_stop(udc->thread_task);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct of_device_id max3420_udc_of_match[] = {
+	{ .compatible = "maxim,max3420-udc"},
+	{ .compatible = "maxim,max3421-udc"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, max3420_udc_of_match);
+
+static struct spi_driver max3420_driver = {
+	.driver = {
+		.name = "max3420-udc",
+		.of_match_table = of_match_ptr(max3420_udc_of_match),
+	},
+	.probe = max3420_probe,
+	.remove = max3420_remove,
+};
+
+module_spi_driver(max3420_driver);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Jassi Brar <jaswinder.singh@linaro.org>");
+MODULE_LICENSE("GPL");
