deleted file mode 100644
@@ -1,49 +0,0 @@
-Sharp Microelectronics 10.1" WQXGA TFT LCD panel
-
-This panel requires a dual-channel DSI host to operate. It supports two modes:
-- left-right: each channel drives the left or right half of the screen
-- even-odd: each channel drives the even or odd lines of the screen
-
-Each of the DSI channels controls a separate DSI peripheral. The peripheral
-driven by the first link (DSI-LINK1), left or even, is considered the primary
-peripheral and controls the device. The 'link2' property contains a phandle
-to the peripheral driven by the second link (DSI-LINK2, right or odd).
-
-Note that in video mode the DSI-LINK1 interface always provides the left/even
-pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
-is possible to program either link to drive the left/even or right/odd pixels
-but for the sake of consistency this binding assumes that the same assignment
-is chosen as for video mode.
-
-Required properties:
-- compatible: should be "sharp,lq101r1sx01"
-- reg: DSI virtual channel of the peripheral
-
-Required properties (for DSI-LINK1 only):
-- link2: phandle to the DSI peripheral on the secondary link. Note that the
- presence of this property marks the containing node as DSI-LINK1.
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties (for DSI-LINK1 only):
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
- dsi@54300000 {
- panel: panel@0 {
- compatible = "sharp,lq101r1sx01";
- reg = <0>;
-
- link2 = <&secondary>;
-
- power-supply = <...>;
- backlight = <...>;
- };
- };
-
- dsi@54400000 {
- secondary: panel@0 {
- compatible = "sharp,lq101r1sx01";
- reg = <0>;
- };
- };
new file mode 100644
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq101r1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+
+description: |
+ This panel requires a dual-channel DSI host to operate. It supports two modes:
+ - left-right: each channel drives the left or right half of the screen
+ - even-odd: each channel drives the even or odd lines of the screen
+
+ Each of the DSI channels controls a separate DSI peripheral. The peripheral
+ driven by the first link (DSI-LINK1), left or even, is considered the primary
+ peripheral and controls the device. The 'link2' property contains a phandle
+ to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+ Note that in video mode the DSI-LINK1 interface always provides the left/even
+ pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+ is possible to program either link to drive the left/even or right/odd pixels
+ but for the sake of consistency this binding assumes that the same assignment
+ is chosen as for video mode.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+ compatible:
+ const: sharp,lq101r1sx01
+
+ reg: true
+ power-supply: true
+ backlight: true
+
+ link2:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to the DSI peripheral on the secondary link. Note that the
+ presence of this property marks the containing node as DSI-LINK1
+
+required:
+ - compatible
+ - reg
+
+if:
+ required:
+ - link2
+then:
+ required:
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel: panel@0 {
+ compatible = "sharp,lq101r1sx01";
+ reg = <0>;
+
+ link2 = <&secondary>;
+
+ power-supply = <&power>;
+ backlight = <&backlight>;
+ };
+ };
+
+ dsi1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ secondary: panel@0 {
+ compatible = "sharp,lq101r1sx01";
+ reg = <0>;
+ };
+ };
+
+...
This binding describes a panel with a secondary channel. v2: - add check for required properties if link2 is present (Rob) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Herring <robh@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> --- .../display/panel/sharp,lq101r1sx01.txt | 49 ----------- .../display/panel/sharp,lq101r1sx01.yaml | 85 +++++++++++++++++++ 2 files changed, 85 insertions(+), 49 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml