diff mbox series

[DO,NOT,MERGE,v2,09/11] arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clock

Message ID 20200429201644.1144546-10-martin.blumenstingl@googlemail.com
State Accepted
Commit 32b5f4b63487a24712c3bfa1d6a8eb9257beb8bd
Headers show
Series dwmac-meson8b Ethernet RX delay configuration | expand

Commit Message

Martin Blumenstingl April 29, 2020, 8:16 p.m. UTC 
Add the "timing-adjusment" clock now that we now that this is connected
to the PRG_ETHERNET registers. It is used internally to generate the
RGMII RX delay no the MAC side (if needed).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi        | 6 ++++--
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++--
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi       | 5 +++--
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi        | 5 +++--
 4 files changed, 14 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index aace3d32a3df..b021d802807a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -181,8 +181,10 @@  ethmac: ethernet@ff3f0000 {
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 0882ea215b88..f800bfc68832 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -185,8 +185,10 @@  ethmac: ethernet@ff3f0000 {
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 0cb40326b0d3..f6efa1cdb72b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -310,8 +310,9 @@  &efuse {
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 };
 
 &gpio_intc {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 259d86399390..9d173e3c8794 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -92,8 +92,9 @@  &efuse {
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 
 	mdio0: mdio {
 		#address-cells = <1>;