| Message ID | 20200609103000.753453-1-tomi.valkeinen@ti.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/3] ARM: dts: am437x-sk-evm: remove lcd timings | expand |
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 4d5a7ca2e25d..6c83812407bf 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -134,22 +134,6 @@ lcd0: display { enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <2>; - hback-porch = <2>; - hsync-len = <41>; - vfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - port { lcd_in: endpoint { remote-endpoint = <&dpi_out>;
LCD timings now come from panel-simple. Having timings in the DT will cause a WARN. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- arch/arm/boot/dts/am437x-sk-evm.dts | 16 ---------------- 1 file changed, 16 deletions(-)