@@ -1045,7 +1045,8 @@
clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>,
<&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>;
clock-names = "ref_clk", "phy_clk";
- freq-table-hz = <0 0>, <0 0>;
+ freq-table-hz = <0 0
+ 0 0>;
/* offset: 0x84; bit: 12 */
resets = <&crg_rst 0x84 12>;
reset-names = "rst";
@@ -667,7 +667,8 @@
clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
<&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
clock-names = "ref_clk", "phy_clk";
- freq-table-hz = <0 0>, <0 0>;
+ freq-table-hz = <0 0
+ 0 0>;
/* offset: 0x84; bit: 12 */
resets = <&crg_rst 0x84 12>;
reset-names = "rst";
@@ -91,11 +91,10 @@
gmacphyrst: reset-controller {
compatible = "ti,syscon-reset";
#reset-cells = <1>;
- ti,reset-bits =
- <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR |
- DEASSERT_SET|STATUS_NONE)>,
- <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR |
- DEASSERT_SET|STATUS_NONE)>;
+ ti,reset-bits = <
+ 0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
+ 0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE)
+ >;
};
};
Use <> to separate the values of property-units will be treated as multiple arrays. The errors similar to the following will be reported by property-units.yaml. ufs@ff3c0000: freq-table-hz: [[0, 0], [0, 0]] is too long Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> --- arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 3 ++- arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 3 ++- arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 9 ++++----- 3 files changed, 8 insertions(+), 7 deletions(-) -- 1.8.3