diff mbox series

[1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support

Message ID 20210503142905.21468-1-amadeus@jmu.edu.cn
State Superseded
Headers show
Series [1/2] arm64: dts: allwinner: h5: Add NanoPi R1S H5 support | expand

Commit Message

Chukun Pan May 3, 2021, 2:29 p.m. UTC
The NanoPi R1S H5 is a open source board made by FriendlyElec.
It has the following features:

- Allwinner H5, Quad-core Cortex-A53
- 512MB DDR3 RAM
- 10/100/1000M Ethernet x 2
- RTL8189ETV WiFi 802.11b/g/n
- USB 2.0 host port (A)
- MicroSD Slot
- Serial Debug Port
- 5V 2A DC power-supply

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 194 ++++++++++++++++++
 2 files changed, 195 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts

Comments

Naresh Kamboju May 11, 2021, 5:21 a.m. UTC | #1
On Mon, 3 May 2021 at 20:09, Chukun Pan <amadeus@jmu.edu.cn> wrote:
>

> The NanoPi R1S H5 is a open source board made by FriendlyElec.

> It has the following features:

>

> - Allwinner H5, Quad-core Cortex-A53

> - 512MB DDR3 RAM

> - 10/100/1000M Ethernet x 2

> - RTL8189ETV WiFi 802.11b/g/n

> - USB 2.0 host port (A)

> - MicroSD Slot

> - Serial Debug Port

> - 5V 2A DC power-supply

>

> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>


Linux next tag next-20210511 arm64 build failed due to this error.

Error: /builds/linux/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts:35.15-16
syntax error
FATAL ERROR: Unable to parse input tree
make[3]: *** [/builds/linux/scripts/Makefile.lib:365:
arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dtb] Error 1
make[3]: Target '__build' not remade because of errors.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

#regzb introduced: 7c9dbeda744f ("arm64: dts: allwinner: h5: Add
NanoPi R1S H5 support")


> ---

>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +

>  .../dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 194 ++++++++++++++++++

>  2 files changed, 195 insertions(+)

>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts



steps to reproduce:
--------------------------
# TuxMake is a command line tool and Python library that provides
# portable and repeatable Linux kernel builds across a variety of
# architectures, toolchains, kernel configurations, and make targets.
#
# TuxMake supports the concept of runtimes.
# See https://docs.tuxmake.org/runtimes/, for that to work it requires
# that you install podman or docker on your system.
#
# To install tuxmake on your system globally:
# sudo pip3 install -U tuxmake
#
# See https://docs.tuxmake.org/ for complete documentation.


tuxmake --runtime podman --target-arch arm64 --toolchain gcc-9
--kconfig defconfig --kconfig-add
https://builds.tuxbuild.com/1sNFFZazb6TLzCYLxNoyIcWs0eU/config


metadata:
  git branch: master
  git repo: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
  git commit: 4bf27b1f73303c33c5570b63f8ed734abcd1991f
  git describe: next-20210511


--
Linaro LKFT
https://lkft.linaro.org
Maxime Ripard May 11, 2021, 8:18 a.m. UTC | #2
Hi,

On Tue, May 11, 2021 at 10:51:28AM +0530, Naresh Kamboju wrote:
> On Mon, 3 May 2021 at 20:09, Chukun Pan <amadeus@jmu.edu.cn> wrote:

> >

> > The NanoPi R1S H5 is a open source board made by FriendlyElec.

> > It has the following features:

> >

> > - Allwinner H5, Quad-core Cortex-A53

> > - 512MB DDR3 RAM

> > - 10/100/1000M Ethernet x 2

> > - RTL8189ETV WiFi 802.11b/g/n

> > - USB 2.0 host port (A)

> > - MicroSD Slot

> > - Serial Debug Port

> > - 5V 2A DC power-supply

> >

> > Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

> 

> Linux next tag next-20210511 arm64 build failed due to this error.

> 

> Error: /builds/linux/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts:35.15-16

> syntax error

> FATAL ERROR: Unable to parse input tree

> make[3]: *** [/builds/linux/scripts/Makefile.lib:365:

> arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dtb] Error 1

> make[3]: Target '__build' not remade because of errors.

> 

> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>

> 

> #regzb introduced: 7c9dbeda744f ("arm64: dts: allwinner: h5: Add

> NanoPi R1S H5 support")


Thanks, I dropped the patch.
Chukun, please resend it once it's fixed

Maxime
Maxime Ripard May 18, 2021, 2:01 p.m. UTC | #3
On Mon, May 17, 2021 at 12:35:21AM +0800, Chukun Pan wrote:
> I'm very sorry for the compilation error caused by the patches I sent

> before, now fixed it.

> 

> Changes from v2:

> * Added missing header file in the dts.

> * Collected acked-by.


Applied both, thanks
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 41ce680e5f8d..a96d9d2d8dd8 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -25,6 +25,7 @@  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-r1s-h5.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
new file mode 100644
index 000000000000..1fe517db9d85
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
@@ -0,0 +1,194 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 Chukun Pan <amadeus@jmu.edu.cn>
+ *
+ * Based on sun50i-h5-nanopi-neo-plus2.dts, which is:
+ *   Copyright (C) 2017 Antony Antony <antony@phenome.org>
+ *   Copyright (C) 2016 ARM Ltd.
+ */
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "FriendlyARM NanoPi R1S H5";
+	compatible = "friendlyarm,nanopi-r1s-h5", "allwinner,sun50i-h5";
+
+	aliases {
+		ethernet0 = &emac;
+		ethernet1 = &rtl8189etv;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	r-gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb0_vbus: usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+		status = "okay";
+	};
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "microchip,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	rtl8189etv: sdio_wifi@1 {
+		reg = <1>;
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	/* USB Type-A port's VBUS is always on */
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};