[2/4] ASoC: codecs: wcd: add multi button Headset detection support

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 2a7b3e363069..2faf0809d01f 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -1525,6 +1525,9 @@  config SND_SOC_WCD9335
 	  Qualcomm Technologies, Inc. (QTI) multimedia solutions,
 	  including the MSM8996, MSM8976, and MSM8956 chipsets.
 
+config SND_SOC_WCD_MBHC
+	tristate
+
 config SND_SOC_WCD934X
 	tristate "WCD9340/WCD9341 Codec"
 	depends on COMMON_CLK
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index 0efdba609048..a24bd8247d77 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -250,6 +250,7 @@  snd-soc-twl6040-objs := twl6040.o
 snd-soc-uda1334-objs := uda1334.o
 snd-soc-uda134x-objs := uda134x.o
 snd-soc-uda1380-objs := uda1380.o
+snd-soc-wcd-mbhc-objs := wcd-mbhc-v2.o
 snd-soc-wcd9335-objs := wcd-clsh-v2.o wcd9335.o
 snd-soc-wcd934x-objs := wcd-clsh-v2.o wcd934x.o
 snd-soc-wl1273-objs := wl1273.o
@@ -572,6 +573,7 @@  obj-$(CONFIG_SND_SOC_TWL6040)	+= snd-soc-twl6040.o
 obj-$(CONFIG_SND_SOC_UDA1334)	+= snd-soc-uda1334.o
 obj-$(CONFIG_SND_SOC_UDA134X)	+= snd-soc-uda134x.o
 obj-$(CONFIG_SND_SOC_UDA1380)	+= snd-soc-uda1380.o
+obj-$(CONFIG_SND_SOC_WCD_MBHC)	+= snd-soc-wcd-mbhc.o
 obj-$(CONFIG_SND_SOC_WCD9335)	+= snd-soc-wcd9335.o
 obj-$(CONFIG_SND_SOC_WCD934X)	+= snd-soc-wcd934x.o
 obj-$(CONFIG_SND_SOC_WL1273)	+= snd-soc-wl1273.o
diff --git a/sound/soc/codecs/wcd-mbhc-v2.c b/sound/soc/codecs/wcd-mbhc-v2.c
new file mode 100644
index 000000000000..7e1697956037
--- /dev/null
+++ b/sound/soc/codecs/wcd-mbhc-v2.c
@@ -0,0 +1,1463 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/printk.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include "wcd-mbhc-v2.h"
+
+#define HS_DETECT_PLUG_TIME_MS		(3 * 1000)
+#define MBHC_BUTTON_PRESS_THRESHOLD_MIN	250
+#define GND_MIC_SWAP_THRESHOLD		4
+#define WCD_FAKE_REMOVAL_MIN_PERIOD_MS	100
+#define HPHL_CROSS_CONN_THRESHOLD	100
+#define HS_VREF_MIN_VAL			1400
+#define FAKE_REM_RETRY_ATTEMPTS		3
+#define WCD_MBHC_ADC_HS_THRESHOLD_MV	1700
+#define WCD_MBHC_ADC_HPH_THRESHOLD_MV	75
+#define WCD_MBHC_ADC_MICBIAS_MV		1800
+#define WCD_MBHC_FAKE_INS_RETRY		4
+
+#define WCD_MBHC_JACK_MASK (SND_JACK_HEADSET | SND_JACK_LINEOUT | \
+			   SND_JACK_MECHANICAL)
+
+#define WCD_MBHC_JACK_BUTTON_MASK (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \
+				  SND_JACK_BTN_2 | SND_JACK_BTN_3 | \
+				  SND_JACK_BTN_4 | SND_JACK_BTN_5)
+
+enum wcd_mbhc_adc_mux_ctl {
+	MUX_CTL_AUTO = 0,
+	MUX_CTL_IN2P,
+	MUX_CTL_IN3P,
+	MUX_CTL_IN4P,
+	MUX_CTL_HPH_L,
+	MUX_CTL_HPH_R,
+	MUX_CTL_NONE,
+};
+
+struct wcd_mbhc {
+	struct device *dev;
+	struct snd_soc_component *component;
+	struct snd_soc_jack *jack;
+	struct wcd_mbhc_config *cfg;
+	const struct wcd_mbhc_cb *mbhc_cb;
+	const struct wcd_mbhc_intr *intr_ids;
+	struct wcd_mbhc_field *fields;
+	/* Delayed work to report long button press */
+	struct delayed_work mbhc_btn_dwork;
+	/* Work to correct accessory type */
+	struct work_struct correct_plug_swch;
+	struct mutex lock;
+	int buttons_pressed;
+	u32 hph_status; /* track headhpone status */
+	u8 current_plug;
+	bool is_btn_press;
+	bool in_swch_irq_handler;
+	bool hs_detect_work_stop;
+	bool is_hs_recording;
+	bool extn_cable_hph_rem;
+	bool force_linein;
+	bool impedance_detect;
+	unsigned long event_state;
+	unsigned long jiffies_atreport;
+	/* impedance of hphl and hphr */
+	uint32_t zl, zr;
+	/* Holds type of Headset - Mono/Stereo */
+	enum wcd_mbhc_hph_type hph_type;
+	/* Holds mbhc detection method - ADC/Legacy */
+	int mbhc_detection_logic;
+};
+
+static inline int wcd_mbhc_write_field(const struct wcd_mbhc *mbhc,
+				       int field, int val)
+{
+	if (!mbhc->fields[field].reg)
+		return 0;
+
+	return snd_soc_component_write_field(mbhc->component,
+					     mbhc->fields[field].reg,
+					     mbhc->fields[field].mask, val);
+}
+
+static inline int wcd_mbhc_read_field(const struct wcd_mbhc *mbhc, int field)
+{
+	if (!mbhc->fields[field].reg)
+		return 0;
+
+	return snd_soc_component_read_field(mbhc->component,
+					    mbhc->fields[field].reg,
+					    mbhc->fields[field].mask);
+}
+
+static void wcd_program_hs_vref(struct wcd_mbhc *mbhc)
+{
+	u32 reg_val = ((mbhc->cfg->v_hs_max - HS_VREF_MIN_VAL) / 100);
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_VREF, reg_val);
+}
+
+static void wcd_program_btn_threshold(const struct wcd_mbhc *mbhc, bool micbias)
+{
+	struct snd_soc_component *component = mbhc->component;
+
+	mbhc->mbhc_cb->set_btn_thr(component, mbhc->cfg->btn_low,
+				   mbhc->cfg->btn_high,
+				   mbhc->cfg->num_btn, micbias);
+}
+
+static void wcd_mbhc_curr_micbias_control(const struct wcd_mbhc *mbhc,
+					  const enum wcd_mbhc_cs_mb_en_flag cs_mb_en)
+{
+
+	/*
+	 * Some codecs handle micbias/pullup enablement in codec
+	 * drivers itself and micbias is not needed for regular
+	 * plug type detection. So if micbias_control callback function
+	 * is defined, just return.
+	 */
+	if (mbhc->mbhc_cb->mbhc_micbias_control)
+		return;
+
+	switch (cs_mb_en) {
+	case WCD_MBHC_EN_CS:
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
+		/* Program Button threshold registers as per CS */
+		wcd_program_btn_threshold(mbhc, false);
+		break;
+	case WCD_MBHC_EN_MB:
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
+		/* Disable PULL_UP_EN & enable MICBIAS */
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 2);
+		/* Program Button threshold registers as per MICBIAS */
+		wcd_program_btn_threshold(mbhc, true);
+		break;
+	case WCD_MBHC_EN_PULLUP:
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 1);
+		/* Program Button threshold registers as per MICBIAS */
+		wcd_program_btn_threshold(mbhc, true);
+		break;
+	case WCD_MBHC_EN_NONE:
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0);
+		break;
+	default:
+		dev_err(mbhc->dev, "%s: Invalid parameter", __func__);
+		break;
+	}
+}
+
+int wcd_mbhc_event_notify(struct wcd_mbhc *mbhc, unsigned long event)
+{
+
+	struct snd_soc_component *component;
+	bool micbias2 = false;
+
+	if (!mbhc)
+		return 0;
+
+	component = mbhc->component;
+
+	if (mbhc->mbhc_cb->micbias_enable_status)
+		micbias2 = mbhc->mbhc_cb->micbias_enable_status(component, MIC_BIAS_2);
+
+	switch (event) {
+	/* MICBIAS usage change */
+	case WCD_EVENT_POST_DAPM_MICBIAS_2_ON:
+		mbhc->is_hs_recording = true;
+		break;
+	case WCD_EVENT_POST_MICBIAS_2_ON:
+		/* Disable current source if micbias2 enabled */
+		if (mbhc->mbhc_cb->mbhc_micbias_control) {
+			if (wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN))
+				wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
+		} else {
+			mbhc->is_hs_recording = true;
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
+		}
+		break;
+	case WCD_EVENT_PRE_MICBIAS_2_OFF:
+		/*
+		 * Before MICBIAS_2 is turned off, if FSM is enabled,
+		 * make sure current source is enabled so as to detect
+		 * button press/release events
+		 */
+		if (mbhc->mbhc_cb->mbhc_micbias_control/* && !mbhc->micbias_enable*/) {
+			if (wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN))
+				wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
+		}
+		break;
+	/* MICBIAS usage change */
+	case WCD_EVENT_POST_DAPM_MICBIAS_2_OFF:
+		mbhc->is_hs_recording = false;
+		break;
+	case WCD_EVENT_POST_MICBIAS_2_OFF:
+		if (!mbhc->mbhc_cb->mbhc_micbias_control)
+			mbhc->is_hs_recording = false;
+
+		/* Enable PULL UP if PA's are enabled */
+		if ((test_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state)) ||
+		    (test_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state)))
+			/* enable pullup and cs, disable mb */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP);
+		else
+			/* enable current source and disable mb, pullup*/
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS);
+
+		break;
+	case WCD_EVENT_POST_HPHL_PA_OFF:
+		clear_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state);
+
+		/* check if micbias is enabled */
+		if (micbias2)
+			/* Disable cs, pullup & enable micbias */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
+		else
+			/* Disable micbias, pullup & enable cs */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS);
+		break;
+	case WCD_EVENT_POST_HPHR_PA_OFF:
+		clear_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state);
+		/* check if micbias is enabled */
+		if (micbias2)
+			/* Disable cs, pullup & enable micbias */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
+		else
+			/* Disable micbias, pullup & enable cs */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS);
+		break;
+	case WCD_EVENT_PRE_HPHL_PA_ON:
+		set_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state);
+		/* check if micbias is enabled */
+		if (micbias2)
+			/* Disable cs, pullup & enable micbias */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
+		else
+			/* Disable micbias, enable pullup & cs */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP);
+		break;
+	case WCD_EVENT_PRE_HPHR_PA_ON:
+		set_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state);
+		/* check if micbias is enabled */
+		if (micbias2)
+			/* Disable cs, pullup & enable micbias */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
+		else
+			/* Disable micbias, enable pullup & cs */
+			wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP);
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(wcd_mbhc_event_notify);
+
+static int wcd_cancel_btn_work(struct wcd_mbhc *mbhc)
+{
+	return cancel_delayed_work_sync(&mbhc->mbhc_btn_dwork);
+}
+
+static void wcd_micbias_disable(struct wcd_mbhc *mbhc)
+{
+	struct snd_soc_component *component = mbhc->component;
+
+	if (mbhc->mbhc_cb->mbhc_micbias_control)
+		mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2, MICB_DISABLE);
+
+	if (mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic)
+		mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic(component, MIC_BIAS_2, false);
+
+	if (mbhc->mbhc_cb->set_micbias_value) {
+		mbhc->mbhc_cb->set_micbias_value(component);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0);
+	}
+}
+
+static void wcd_mbhc_report_plug_removal(struct wcd_mbhc *mbhc,
+					 enum snd_jack_types jack_type)
+{
+	mbhc->hph_status &= ~jack_type;
+	/*
+	 * cancel possibly scheduled btn work and
+	 * report release if we reported button press
+	 */
+	if (!wcd_cancel_btn_work(mbhc) && mbhc->buttons_pressed) {
+		snd_soc_jack_report(mbhc->jack, 0, mbhc->buttons_pressed);
+		mbhc->buttons_pressed &= ~WCD_MBHC_JACK_BUTTON_MASK;
+	}
+
+	wcd_micbias_disable(mbhc);
+	mbhc->hph_type = WCD_MBHC_HPH_NONE;
+	mbhc->zl = mbhc->zr = 0;
+	snd_soc_jack_report(mbhc->jack, mbhc->hph_status, WCD_MBHC_JACK_MASK);
+	mbhc->current_plug = MBHC_PLUG_TYPE_NONE;
+	mbhc->force_linein = false;
+}
+
+static void wcd_mbhc_compute_impedance(struct wcd_mbhc *mbhc)
+{
+
+	if (!mbhc->impedance_detect)
+		return;
+
+	if (mbhc->cfg->linein_th != 0) {
+		u8 fsm_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN);
+		/* Set MUX_CTL to AUTO for Z-det */
+
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_AUTO);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
+		mbhc->mbhc_cb->compute_impedance(mbhc->component, &mbhc->zl, &mbhc->zr);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, fsm_en);
+	}
+}
+
+static void wcd_mbhc_report_plug_insertion(struct wcd_mbhc *mbhc,
+					   enum snd_jack_types jack_type)
+{
+	bool is_pa_on;
+	/*
+	 * Report removal of current jack type.
+	 * Headphone to headset shouldn't report headphone
+	 * removal.
+	 */
+	if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET &&
+	    jack_type == SND_JACK_HEADPHONE)
+		mbhc->hph_status &= ~SND_JACK_HEADSET;
+
+	/* Report insertion */
+	if (jack_type == SND_JACK_HEADPHONE)
+		mbhc->current_plug = MBHC_PLUG_TYPE_HEADPHONE;
+	else if (jack_type == SND_JACK_HEADSET) {
+		mbhc->current_plug = MBHC_PLUG_TYPE_HEADSET;
+		mbhc->jiffies_atreport = jiffies;
+	} else if (jack_type == SND_JACK_LINEOUT)
+		mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH;
+
+	is_pa_on = wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN);
+
+	if (!is_pa_on) {
+		wcd_mbhc_compute_impedance(mbhc);
+		if ((mbhc->zl > mbhc->cfg->linein_th) &&
+		    (mbhc->zr > mbhc->cfg->linein_th) &&
+		    (jack_type == SND_JACK_HEADPHONE)) {
+			jack_type = SND_JACK_LINEOUT;
+			mbhc->force_linein = true;
+			mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH;
+			if (mbhc->hph_status) {
+				mbhc->hph_status &= ~(SND_JACK_HEADSET |
+						      SND_JACK_LINEOUT);
+				snd_soc_jack_report(mbhc->jack,	mbhc->hph_status,
+						    WCD_MBHC_JACK_MASK);
+			}
+		}
+	}
+
+	/* Do not calculate impedance again for lineout
+	 * as during playback pa is on and impedance values
+	 * will not be correct resulting in lineout detected
+	 * as headphone.
+	 */
+	if (is_pa_on && mbhc->force_linein) {
+		jack_type = SND_JACK_LINEOUT;
+		mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH;
+		if (mbhc->hph_status) {
+			mbhc->hph_status &= ~(SND_JACK_HEADSET |
+					      SND_JACK_LINEOUT);
+			snd_soc_jack_report(mbhc->jack,	mbhc->hph_status,
+					    WCD_MBHC_JACK_MASK);
+		}
+	}
+
+	mbhc->hph_status |= jack_type;
+
+	if (jack_type == SND_JACK_HEADPHONE && mbhc->mbhc_cb->mbhc_micb_ramp_control)
+		mbhc->mbhc_cb->mbhc_micb_ramp_control(mbhc->component, false);
+
+	snd_soc_jack_report(mbhc->jack, (mbhc->hph_status | SND_JACK_MECHANICAL),
+			    WCD_MBHC_JACK_MASK);
+}
+
+static void wcd_mbhc_report_plug(struct wcd_mbhc *mbhc, int insertion,
+				 enum snd_jack_types jack_type)
+{
+
+	WARN_ON(!mutex_is_locked(&mbhc->lock));
+
+	if (!insertion) /* Report removal */
+		wcd_mbhc_report_plug_removal(mbhc, jack_type);
+	else
+		wcd_mbhc_report_plug_insertion(mbhc, jack_type);
+
+}
+
+static void wcd_cancel_hs_detect_plug(struct wcd_mbhc *mbhc,
+				      struct work_struct *work)
+{
+	mbhc->hs_detect_work_stop = true;
+	mutex_unlock(&mbhc->lock);
+	cancel_work_sync(work);
+	mutex_lock(&mbhc->lock);
+}
+
+static void wcd_mbhc_cancel_pending_work(struct wcd_mbhc *mbhc)
+{
+	/* cancel pending button press */
+	wcd_cancel_btn_work(mbhc);
+	/* cancel correct work function */
+	wcd_cancel_hs_detect_plug(mbhc,	&mbhc->correct_plug_swch);
+}
+
+static void wcd_mbhc_elec_hs_report_unplug(struct wcd_mbhc *mbhc)
+{
+	wcd_mbhc_cancel_pending_work(mbhc);
+	/* Report extension cable */
+	wcd_mbhc_report_plug(mbhc, 1, SND_JACK_LINEOUT);
+	/*
+	 * Disable HPHL trigger and MIC Schmitt triggers.
+	 * Setup for insertion detection.
+	 */
+	disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr);
+	wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_NONE);
+	/* Disable HW FSM */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 3);
+
+	/* Set the detection type appropriately */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_DETECTION_TYPE, 1);
+	enable_irq(mbhc->intr_ids->mbhc_hs_ins_intr);
+}
+
+static void wcd_mbhc_find_plug_and_report(struct wcd_mbhc *mbhc,
+				   enum wcd_mbhc_plug_type plug_type)
+{
+	if (mbhc->current_plug == plug_type)
+		return;
+
+	mutex_lock(&mbhc->lock);
+
+	switch (plug_type) {
+	case MBHC_PLUG_TYPE_HEADPHONE:
+		wcd_mbhc_report_plug(mbhc, 1, SND_JACK_HEADPHONE);
+		break;
+	case MBHC_PLUG_TYPE_HEADSET:
+		wcd_mbhc_report_plug(mbhc, 1, SND_JACK_HEADSET);
+		break;
+	case MBHC_PLUG_TYPE_HIGH_HPH:
+		wcd_mbhc_report_plug(mbhc, 1, SND_JACK_LINEOUT);
+		break;
+	case MBHC_PLUG_TYPE_GND_MIC_SWAP:
+		if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE)
+			wcd_mbhc_report_plug(mbhc, 0, SND_JACK_HEADPHONE);
+		if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET)
+			wcd_mbhc_report_plug(mbhc, 0, SND_JACK_HEADSET);
+		break;
+	default:
+		WARN(1, "Unexpected current plug_type %d, plug_type %d\n",
+		     mbhc->current_plug, plug_type);
+		break;
+	}
+	mutex_unlock(&mbhc->lock);
+}
+
+static void wcd_schedule_hs_detect_plug(struct wcd_mbhc *mbhc,
+					    struct work_struct *work)
+{
+	WARN_ON(!mutex_is_locked(&mbhc->lock));
+	mbhc->hs_detect_work_stop = false;
+	schedule_work(work);
+}
+
+static void wcd_mbhc_adc_detect_plug_type(struct wcd_mbhc *mbhc)
+{
+	struct snd_soc_component *component = mbhc->component;
+
+	WARN_ON(!mutex_is_locked(&mbhc->lock));
+
+	if (mbhc->mbhc_cb->hph_pull_down_ctrl)
+		mbhc->mbhc_cb->hph_pull_down_ctrl(component, false);
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0);
+
+	if (mbhc->mbhc_cb->mbhc_micbias_control) {
+		mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2,
+						    MICB_ENABLE);
+		wcd_schedule_hs_detect_plug(mbhc, &mbhc->correct_plug_swch);
+	}
+}
+
+static irqreturn_t wcd_mbhc_mech_plug_detect_irq(int irq, void *data)
+{
+	struct snd_soc_component *component;
+	enum snd_jack_types jack_type;
+	struct wcd_mbhc *mbhc = data;
+	bool detection_type;
+
+	component = mbhc->component;
+	mutex_lock(&mbhc->lock);
+
+	mbhc->in_swch_irq_handler = true;
+
+	wcd_mbhc_cancel_pending_work(mbhc);
+
+	detection_type = wcd_mbhc_read_field(mbhc, WCD_MBHC_MECH_DETECTION_TYPE);
+
+	/* Set the detection type appropriately */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_MECH_DETECTION_TYPE, !detection_type);
+
+	/* Enable micbias ramp */
+	if (mbhc->mbhc_cb->mbhc_micb_ramp_control)
+		mbhc->mbhc_cb->mbhc_micb_ramp_control(component, true);
+
+	if (detection_type) {
+		if (mbhc->current_plug != MBHC_PLUG_TYPE_NONE)
+			goto exit;
+		/* Make sure MASTER_BIAS_CTL is enabled */
+		mbhc->mbhc_cb->mbhc_bias(component, true);
+		mbhc->is_btn_press = false;
+		wcd_mbhc_adc_detect_plug_type(mbhc);
+	} else {
+		/* Disable HW FSM */
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
+		mbhc->extn_cable_hph_rem = false;
+
+		if (mbhc->current_plug == MBHC_PLUG_TYPE_NONE)
+			goto exit;
+
+		mbhc->is_btn_press = false;
+		switch (mbhc->current_plug) {
+		case MBHC_PLUG_TYPE_HEADPHONE:
+			jack_type = SND_JACK_HEADPHONE;
+			break;
+		case MBHC_PLUG_TYPE_HEADSET:
+			jack_type = SND_JACK_HEADSET;
+			break;
+		case MBHC_PLUG_TYPE_HIGH_HPH:
+			if (mbhc->mbhc_detection_logic == WCD_DETECTION_ADC)
+				wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 0);
+			jack_type = SND_JACK_LINEOUT;
+			break;
+		case MBHC_PLUG_TYPE_GND_MIC_SWAP:
+			dev_err(mbhc->dev, "Ground and Mic Swapped on plug\n");
+			break;
+		default:
+			dev_err(mbhc->dev, "Invalid current plug: %d\n",
+				mbhc->current_plug);
+			goto exit;
+		}
+		disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr);
+		disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_DETECTION_TYPE, 1);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0);
+		wcd_mbhc_report_plug(mbhc, 0, jack_type);
+	}
+
+exit:
+	mbhc->in_swch_irq_handler = false;
+	mutex_unlock(&mbhc->lock);
+	return IRQ_HANDLED;
+}
+
+static int wcd_mbhc_get_button_mask(struct wcd_mbhc *mbhc)
+{
+	int mask = 0;
+	int btn;
+
+	btn = wcd_mbhc_read_field(mbhc, WCD_MBHC_BTN_RESULT);
+
+	switch (btn) {
+	case 0:
+		mask = SND_JACK_BTN_0;
+		break;
+	case 1:
+		mask = SND_JACK_BTN_1;
+		break;
+	case 2:
+		mask = SND_JACK_BTN_2;
+		break;
+	case 3:
+		mask = SND_JACK_BTN_3;
+		break;
+	case 4:
+		mask = SND_JACK_BTN_4;
+		break;
+	case 5:
+		mask = SND_JACK_BTN_5;
+		break;
+	default:
+		break;
+	}
+
+	return mask;
+}
+
+static void wcd_btn_long_press_fn(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct wcd_mbhc *mbhc = container_of(dwork, struct wcd_mbhc, mbhc_btn_dwork);
+
+	if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET)
+		snd_soc_jack_report(mbhc->jack, mbhc->buttons_pressed,
+				    mbhc->buttons_pressed);
+}
+
+static irqreturn_t wcd_mbhc_btn_press_handler(int irq, void *data)
+{
+	struct wcd_mbhc *mbhc = data;
+	int mask;
+	unsigned long msec_val;
+
+	mutex_lock(&mbhc->lock);
+	wcd_cancel_btn_work(mbhc);
+	mbhc->is_btn_press = true;
+	msec_val = jiffies_to_msecs(jiffies - mbhc->jiffies_atreport);
+
+	/* Too short, ignore button press */
+	if (msec_val < MBHC_BUTTON_PRESS_THRESHOLD_MIN)
+		goto done;
+
+	/* If switch interrupt already kicked in, ignore button press */
+	if (mbhc->in_swch_irq_handler)
+		goto done;
+
+	/* Plug isn't headset, ignore button press */
+	if (mbhc->current_plug != MBHC_PLUG_TYPE_HEADSET)
+		goto done;
+
+	mask = wcd_mbhc_get_button_mask(mbhc);
+	mbhc->buttons_pressed |= mask;
+	if (schedule_delayed_work(&mbhc->mbhc_btn_dwork, msecs_to_jiffies(400)) == 0)
+		WARN(1, "Button pressed twice without release event\n");
+done:
+	mutex_unlock(&mbhc->lock);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wcd_mbhc_btn_release_handler(int irq, void *data)
+{
+	struct wcd_mbhc *mbhc = data;
+	int ret;
+
+	mutex_lock(&mbhc->lock);
+	if (mbhc->is_btn_press)
+		mbhc->is_btn_press = false;
+	else /* fake btn press */
+		goto exit;
+
+	if (!(mbhc->buttons_pressed & WCD_MBHC_JACK_BUTTON_MASK))
+		goto exit;
+
+	ret = wcd_cancel_btn_work(mbhc);
+	if (ret == 0) { /* Reporting long button release event */
+		snd_soc_jack_report(mbhc->jack,	0, mbhc->buttons_pressed);
+	} else {
+		if (!mbhc->in_swch_irq_handler) {
+			/* Reporting btn press n Release */
+			snd_soc_jack_report(mbhc->jack, mbhc->buttons_pressed,
+					    mbhc->buttons_pressed);
+			snd_soc_jack_report(mbhc->jack,	0, mbhc->buttons_pressed);
+		}
+	}
+	mbhc->buttons_pressed &= ~WCD_MBHC_JACK_BUTTON_MASK;
+exit:
+	mutex_unlock(&mbhc->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wcd_mbhc_hph_ocp_irq(struct wcd_mbhc *mbhc, bool hphr)
+{
+
+	/* TODO Find a better way to report this to Userspace */
+	dev_err(mbhc->dev, "MBHC Over Current on %s detected\n",
+		hphr ? "HPHR" : "HPHL");
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_OCP_FSM_EN, 0);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_OCP_FSM_EN, 1);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wcd_mbhc_hphl_ocp_irq(int irq, void *data)
+{
+	return wcd_mbhc_hph_ocp_irq(data, false);
+}
+
+static irqreturn_t wcd_mbhc_hphr_ocp_irq(int irq, void *data)
+{
+	return wcd_mbhc_hph_ocp_irq(data, true);
+}
+
+static int wcd_mbhc_initialise(struct wcd_mbhc *mbhc)
+{
+	struct snd_soc_component *component = mbhc->component;
+
+	mutex_lock(&mbhc->lock);
+
+	/* enable HS detection */
+	if (mbhc->mbhc_cb->hph_pull_up_control_v2)
+		mbhc->mbhc_cb->hph_pull_up_control_v2(component,
+						      HS_PULLUP_I_DEFAULT);
+	else if (mbhc->mbhc_cb->hph_pull_up_control)
+		mbhc->mbhc_cb->hph_pull_up_control(component, I_DEFAULT);
+	else
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_L_DET_PULL_UP_CTRL, 3);
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_HPHL_PLUG_TYPE, mbhc->cfg->hphl_swh);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_GND_PLUG_TYPE, mbhc->cfg->gnd_swh);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_SW_HPH_LP_100K_TO_GND, 1);
+	if (mbhc->cfg->gnd_det_en && mbhc->mbhc_cb->mbhc_gnd_det_ctrl)
+		mbhc->mbhc_cb->mbhc_gnd_det_ctrl(component, true);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_L_DET_PULL_UP_COMP_CTRL, 1);
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_L_DET_EN, 1);
+
+	/* Insertion debounce set to 96ms */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_INSREM_DBNC, 6);
+
+	/* Button Debounce set to 16ms */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_DBNC, 2);
+
+	/* enable bias */
+	mbhc->mbhc_cb->mbhc_bias(component, true);
+	/* enable MBHC clock */
+	if (mbhc->mbhc_cb->clk_setup)
+		mbhc->mbhc_cb->clk_setup(component, true);
+
+	/* program HS_VREF value */
+	wcd_program_hs_vref(mbhc);
+
+	wcd_program_btn_threshold(mbhc, false);
+
+	mutex_unlock(&mbhc->lock);
+
+	return 0;
+}
+
+static int wcd_mbhc_get_micbias(struct wcd_mbhc *mbhc)
+{
+	int micbias = 0;
+
+	if (mbhc->mbhc_cb->get_micbias_val) {
+		mbhc->mbhc_cb->get_micbias_val(mbhc->component, &micbias);
+	} else {
+		u8 vout_ctl = 0;
+		/* Read MBHC Micbias (Mic Bias2) voltage */
+		vout_ctl = wcd_mbhc_read_field(mbhc, WCD_MBHC_MICB2_VOUT);
+		/* Formula for getting micbias from vout
+		 * micbias = 1.0V + VOUT_CTL * 50mV
+		 */
+		micbias = 1000 + (vout_ctl * 50);
+	}
+	return micbias;
+}
+
+static int wcd_get_voltage_from_adc(u8 val, int micbias)
+{
+	/* Formula for calculating voltage from ADC
+	 * Voltage = ADC_RESULT*12.5mV*V_MICBIAS/1.8
+	 */
+	return ((val * 125 * micbias)/(WCD_MBHC_ADC_MICBIAS_MV * 10));
+}
+
+static int wcd_measure_adc_continuous(struct wcd_mbhc *mbhc)
+{
+	u8 adc_result;
+	int output_mv;
+	int retry = 3;
+	u8 adc_en;
+
+	/* Pre-requisites for ADC continuous measurement */
+	/* Read legacy electircal detection and disable */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0x00);
+	/* Set ADC to continuous measurement */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 1);
+	/* Read ADC Enable bit to restore after adc measurement */
+	adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN);
+	/* Disable ADC_ENABLE bit */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
+	/* Disable MBHC FSM */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
+	/* Set the MUX selection to IN2P */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_IN2P);
+	/* Enable MBHC FSM */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
+	/* Enable ADC_ENABLE bit */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 1);
+
+	while (retry--) {
+		/* wait for 3 msec before reading ADC result */
+		usleep_range(3000, 3100);
+		adc_result = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_RESULT);
+	}
+
+	/* Restore ADC Enable */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en);
+	/* Get voltage from ADC result */
+	output_mv = wcd_get_voltage_from_adc(adc_result, wcd_mbhc_get_micbias(mbhc));
+
+	return output_mv;
+}
+
+static int wcd_measure_adc_once(struct wcd_mbhc *mbhc, int mux_ctl)
+{
+	struct device *dev = mbhc->dev;
+	u8 adc_timeout = 0;
+	u8 adc_complete = 0;
+	u8 adc_result;
+	int retry = 6;
+	int ret;
+	int output_mv = 0;
+	u8 adc_en;
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
+	/* Read ADC Enable bit to restore after adc measurement */
+	adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN);
+	/* Trigger ADC one time measurement */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
+	/* Set the appropriate MUX selection */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, mux_ctl);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 1);
+
+	while (retry--) {
+		/* wait for 600usec to get adc results */
+		usleep_range(600, 610);
+
+		/* check for ADC Timeout */
+		adc_timeout = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_TIMEOUT);
+		if (adc_timeout)
+			continue;
+
+		/* Read ADC complete bit */
+		adc_complete = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_COMPLETE);
+		if (!adc_complete)
+			continue;
+
+		/* Read ADC result */
+		adc_result = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_RESULT);
+
+		/* Get voltage from ADC result */
+		output_mv = wcd_get_voltage_from_adc(adc_result,
+						wcd_mbhc_get_micbias(mbhc));
+		break;
+	}
+
+	/* Restore ADC Enable */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en);
+
+	if (retry <= 0) {
+		dev_err(dev, "%s: adc complete: %d, adc timeout: %d\n",
+			__func__, adc_complete, adc_timeout);
+		ret = -EINVAL;
+	} else {
+		ret = output_mv;
+	}
+
+	return ret;
+}
+
+/* To determine if cross connection occurred */
+static int wcd_check_cross_conn(struct wcd_mbhc *mbhc)
+{
+	u8 adc_mode, elect_ctl, adc_en, fsm_en;
+	int hphl_adc_res, hphr_adc_res;
+	bool is_cross_conn = false;
+
+	/* If PA is enabled, dont check for cross-connection */
+	if (wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN))
+		return -EINVAL;
+
+	/* Read legacy electircal detection and disable */
+	elect_ctl = wcd_mbhc_read_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0);
+
+	/* Read and set ADC to single measurement */
+	adc_mode = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_MODE);
+	/* Read ADC Enable bit to restore after adc measurement */
+	adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN);
+	/* Read FSM status */
+	fsm_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN);
+
+	/* Get adc result for HPH L */
+	hphl_adc_res = wcd_measure_adc_once(mbhc, MUX_CTL_HPH_L);
+	if (hphl_adc_res < 0)
+		return hphl_adc_res;
+
+	/* Get adc result for HPH R in mV */
+	hphr_adc_res = wcd_measure_adc_once(mbhc, MUX_CTL_HPH_R);
+	if (hphr_adc_res < 0)
+		return hphr_adc_res;
+
+	if (hphl_adc_res > HPHL_CROSS_CONN_THRESHOLD ||
+	    hphr_adc_res > HPHL_CROSS_CONN_THRESHOLD)
+		is_cross_conn = true;
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
+	/* Set the MUX selection to Auto */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_AUTO);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
+	/* Restore ADC Enable */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en);
+	/* Restore ADC mode */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, adc_mode);
+	/* Restore FSM state */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, fsm_en);
+	/* Restore electrical detection */
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, elect_ctl);
+
+	return is_cross_conn;
+}
+
+static int wcd_mbhc_adc_get_hs_thres(struct wcd_mbhc *mbhc)
+{
+	int hs_threshold, micbias_mv;
+
+	micbias_mv = wcd_mbhc_get_micbias(mbhc);
+	if (mbhc->cfg->hs_thr) {
+		if (mbhc->cfg->micb_mv == micbias_mv)
+			hs_threshold = mbhc->cfg->hs_thr;
+		else
+			hs_threshold = (mbhc->cfg->hs_thr *
+				micbias_mv) / mbhc->cfg->micb_mv;
+	} else {
+		hs_threshold = ((WCD_MBHC_ADC_HS_THRESHOLD_MV *
+			micbias_mv) / WCD_MBHC_ADC_MICBIAS_MV);
+	}
+	return hs_threshold;
+}
+
+static int wcd_mbhc_adc_get_hph_thres(struct wcd_mbhc *mbhc)
+{
+	int hph_threshold, micbias_mv;
+
+	micbias_mv = wcd_mbhc_get_micbias(mbhc);
+	if (mbhc->cfg->hph_thr) {
+		if (mbhc->cfg->micb_mv == micbias_mv)
+			hph_threshold = mbhc->cfg->hph_thr;
+		else
+			hph_threshold = (mbhc->cfg->hph_thr *
+				micbias_mv) / mbhc->cfg->micb_mv;
+	} else {
+		hph_threshold = ((WCD_MBHC_ADC_HPH_THRESHOLD_MV *
+			micbias_mv) / WCD_MBHC_ADC_MICBIAS_MV);
+	}
+	return hph_threshold;
+}
+
+static void wcd_mbhc_adc_update_fsm_source(struct wcd_mbhc *mbhc,
+					   enum wcd_mbhc_plug_type plug_type)
+{
+	bool micbias2 = false;
+
+	switch (plug_type) {
+	case MBHC_PLUG_TYPE_HEADPHONE:
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
+		break;
+	case MBHC_PLUG_TYPE_HEADSET:
+		if (mbhc->mbhc_cb->micbias_enable_status)
+			micbias2 = mbhc->mbhc_cb->micbias_enable_status(mbhc->component,
+									MIC_BIAS_2);
+
+		if (!mbhc->is_hs_recording && !micbias2)
+			wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
+		break;
+	default:
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
+		break;
+
+	};
+}
+
+static void wcd_mbhc_bcs_enable(struct wcd_mbhc *mbhc, int plug_type, bool enable)
+{
+	switch (plug_type) {
+	case MBHC_PLUG_TYPE_HEADSET:
+	case MBHC_PLUG_TYPE_HEADPHONE:
+		if (mbhc->mbhc_cb->bcs_enable)
+			mbhc->mbhc_cb->bcs_enable(mbhc->component, enable);
+		break;
+	default:
+		break;
+	}
+}
+
+static int wcd_mbhc_get_plug_from_adc(struct wcd_mbhc *mbhc, int adc_result)
+
+{
+	enum wcd_mbhc_plug_type plug_type;
+	u32 hph_thr, hs_thr;
+
+	hs_thr = wcd_mbhc_adc_get_hs_thres(mbhc);
+	hph_thr = wcd_mbhc_adc_get_hph_thres(mbhc);
+
+	if (adc_result < hph_thr)
+		plug_type = MBHC_PLUG_TYPE_HEADPHONE;
+	else if (adc_result > hs_thr)
+		plug_type = MBHC_PLUG_TYPE_HIGH_HPH;
+	else
+		plug_type = MBHC_PLUG_TYPE_HEADSET;
+
+	return plug_type;
+}
+
+static void wcd_correct_swch_plug(struct work_struct *work)
+{
+	struct wcd_mbhc *mbhc;
+	struct snd_soc_component *component;
+	enum wcd_mbhc_plug_type plug_type = MBHC_PLUG_TYPE_INVALID;
+	unsigned long timeout;
+	int pt_gnd_mic_swap_cnt = 0;
+	int output_mv, cross_conn, hs_threshold, try = 0;
+	bool is_pa_on;
+
+	mbhc = container_of(work, struct wcd_mbhc, correct_plug_swch);
+	component = mbhc->component;
+
+	hs_threshold = wcd_mbhc_adc_get_hs_thres(mbhc);
+
+	/* Mask ADC COMPLETE interrupt */
+	disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr);
+
+	/* Check for cross connection */
+	do {
+		cross_conn = wcd_check_cross_conn(mbhc);
+		try++;
+	} while (try < GND_MIC_SWAP_THRESHOLD);
+
+	if (cross_conn > 0) {
+		plug_type = MBHC_PLUG_TYPE_GND_MIC_SWAP;
+		dev_err(mbhc->dev, "cross connection found, Plug type %d\n",
+			plug_type);
+		goto correct_plug_type;
+	}
+
+	/* Find plug type */
+	output_mv = wcd_measure_adc_continuous(mbhc);
+	plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv);
+
+	/*
+	 * Report plug type if it is either headset or headphone
+	 * else start the 3 sec loop
+	 */
+	switch (plug_type) {
+	case MBHC_PLUG_TYPE_HEADPHONE:
+		wcd_mbhc_find_plug_and_report(mbhc, plug_type);
+		break;
+	case MBHC_PLUG_TYPE_HEADSET:
+		wcd_mbhc_find_plug_and_report(mbhc, plug_type);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1);
+		break;
+	default:
+		break;
+	}
+
+correct_plug_type:
+
+	/* Disable BCS slow insertion detection */
+	wcd_mbhc_bcs_enable(mbhc, plug_type, false);
+
+	timeout = jiffies + msecs_to_jiffies(HS_DETECT_PLUG_TIME_MS);
+
+	while (!time_after(jiffies, timeout)) {
+		if (mbhc->hs_detect_work_stop) {
+			wcd_micbias_disable(mbhc);
+			goto exit;
+		}
+
+		msleep(180);
+		/*
+		 * Use ADC single mode to minimize the chance of missing out
+		 * btn press/release for HEADSET type during correct work.
+		 */
+		output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P);
+		plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv);
+		is_pa_on = wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN);
+
+		if ((output_mv <= hs_threshold) && !is_pa_on) {
+			/* Check for cross connection*/
+			cross_conn = wcd_check_cross_conn(mbhc);
+			if (cross_conn > 0) { /* cross-connection */
+				pt_gnd_mic_swap_cnt++;
+				if (pt_gnd_mic_swap_cnt < GND_MIC_SWAP_THRESHOLD)
+					continue;
+				else
+					plug_type = MBHC_PLUG_TYPE_GND_MIC_SWAP;
+			} else if (!cross_conn) { /* no cross connection */
+				pt_gnd_mic_swap_cnt = 0;
+				plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv);
+				continue;
+			} else if (cross_conn < 0) /* Error */
+				continue;
+
+			if (pt_gnd_mic_swap_cnt == GND_MIC_SWAP_THRESHOLD) {
+				/* US_EU gpio present, flip switch */
+				if (mbhc->cfg->swap_gnd_mic) {
+					if (mbhc->cfg->swap_gnd_mic(component, true))
+						continue;
+				}
+			}
+		}
+
+		if (output_mv > hs_threshold) /* cable is extension cable */
+			plug_type = MBHC_PLUG_TYPE_HIGH_HPH;
+	}
+
+	wcd_mbhc_bcs_enable(mbhc, plug_type, true);
+
+	if (plug_type == MBHC_PLUG_TYPE_HIGH_HPH)
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 1);
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
+	wcd_mbhc_find_plug_and_report(mbhc, plug_type);
+
+	/*
+	 * Set DETECTION_DONE bit for HEADSET
+	 * so that btn press/release interrupt can be generated.
+	 * For other plug type, clear the bit.
+	 */
+	if (plug_type == MBHC_PLUG_TYPE_HEADSET)
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1);
+	else
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0);
+
+	if (mbhc->mbhc_cb->mbhc_micbias_control)
+		wcd_mbhc_adc_update_fsm_source(mbhc, plug_type);
+
+exit:
+	if (mbhc->mbhc_cb->mbhc_micbias_control/* &&  !mbhc->micbias_enable*/)
+		mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2, MICB_DISABLE);
+
+	/*
+	 * If plug type is corrected from special headset to headphone,
+	 * clear the micbias enable flag, set micbias back to 1.8V and
+	 * disable micbias.
+	 */
+	if (plug_type == MBHC_PLUG_TYPE_HEADPHONE) {
+		wcd_micbias_disable(mbhc);
+		/*
+		 * Enable ADC COMPLETE interrupt for HEADPHONE.
+		 * Btn release may happen after the correct work, ADC COMPLETE
+		 * interrupt needs to be captured to correct plug type.
+		 */
+		enable_irq(mbhc->intr_ids->mbhc_hs_ins_intr);
+	}
+
+	if (mbhc->mbhc_cb->hph_pull_down_ctrl)
+		mbhc->mbhc_cb->hph_pull_down_ctrl(component, true);
+}
+
+static irqreturn_t wcd_mbhc_adc_hs_rem_irq(int irq, void *data)
+{
+	struct wcd_mbhc *mbhc = data;
+	unsigned long timeout;
+	int adc_threshold, output_mv, retry = 0;
+	bool hphpa_on = false;
+
+	mutex_lock(&mbhc->lock);
+	timeout = jiffies + msecs_to_jiffies(WCD_FAKE_REMOVAL_MIN_PERIOD_MS);
+	adc_threshold = wcd_mbhc_adc_get_hs_thres(mbhc);
+
+	do {
+		retry++;
+		/*
+		 * read output_mv every 10ms to look for
+		 * any change in IN2_P
+		 */
+		usleep_range(10000, 10100);
+		output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P);
+
+		/* Check for fake removal */
+		if ((output_mv <= adc_threshold) && retry > FAKE_REM_RETRY_ATTEMPTS)
+			goto exit;
+	} while (!time_after(jiffies, timeout));
+
+	/*
+	 * ADC COMPLETE and ELEC_REM interrupts are both enabled for
+	 * HEADPHONE, need to reject the ADC COMPLETE interrupt which
+	 * follows ELEC_REM one when HEADPHONE is removed.
+	 */
+	if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE)
+		mbhc->extn_cable_hph_rem = true;
+
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
+	wcd_mbhc_elec_hs_report_unplug(mbhc);
+	wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
+
+	if (hphpa_on) {
+		hphpa_on = false;
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_HPH_PA_EN, 3);
+	}
+exit:
+	mutex_unlock(&mbhc->lock);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wcd_mbhc_adc_hs_ins_irq(int irq, void *data)
+{
+	struct wcd_mbhc *mbhc = data;
+	u8 clamp_state = 0;
+	u8 clamp_retry = WCD_MBHC_FAKE_INS_RETRY;
+
+	/*
+	 * ADC COMPLETE and ELEC_REM interrupts are both enabled for HEADPHONE,
+	 * need to reject the ADC COMPLETE interrupt which follows ELEC_REM one
+	 * when HEADPHONE is removed.
+	 */
+	if (mbhc->extn_cable_hph_rem == true) {
+		mbhc->extn_cable_hph_rem = false;
+		return IRQ_HANDLED;
+	}
+
+	do {
+		clamp_state = wcd_mbhc_read_field(mbhc, WCD_MBHC_IN2P_CLAMP_STATE);
+		if (clamp_state)
+			return IRQ_HANDLED;
+		/*
+		 * check clamp for 120ms but at 30ms chunks to leave
+		 * room for other interrupts to be processed
+		 */
+		usleep_range(30000, 30100);
+	} while (--clamp_retry);
+
+	/*
+	 * If current plug is headphone then there is no chance to
+	 * get ADC complete interrupt, so connected cable should be
+	 * headset not headphone.
+	 */
+	if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE) {
+		disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr);
+		wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1);
+		wcd_mbhc_find_plug_and_report(mbhc, MBHC_PLUG_TYPE_HEADSET);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_HANDLED;
+}
+
+int wcd_mbhc_get_impedance(struct wcd_mbhc *mbhc, uint32_t *zl,	uint32_t *zr)
+{
+	*zl = mbhc->zl;
+	*zr = mbhc->zr;
+
+	if (*zl && *zr)
+		return 0;
+	else
+		return -EINVAL;
+}
+EXPORT_SYMBOL(wcd_mbhc_get_impedance);
+
+void wcd_mbhc_set_hph_type(struct wcd_mbhc *mbhc, int hph_type)
+{
+	mbhc->hph_type = hph_type;
+}
+EXPORT_SYMBOL(wcd_mbhc_set_hph_type);
+
+int wcd_mbhc_get_hph_type(struct wcd_mbhc *mbhc)
+{
+	return mbhc->hph_type;
+}
+EXPORT_SYMBOL(wcd_mbhc_get_hph_type);
+
+int wcd_mbhc_start(struct wcd_mbhc *mbhc, struct wcd_mbhc_config *cfg,
+		   struct snd_soc_jack *jack)
+{
+	if (!mbhc || !cfg || !jack)
+		return -EINVAL;
+
+	mbhc->cfg = cfg;
+	mbhc->jack = jack;
+
+	return wcd_mbhc_initialise(mbhc);
+}
+EXPORT_SYMBOL(wcd_mbhc_start);
+
+void wcd_mbhc_stop(struct wcd_mbhc *mbhc)
+{
+	mbhc->current_plug = MBHC_PLUG_TYPE_NONE;
+	mbhc->hph_status = 0;
+	disable_irq_nosync(mbhc->intr_ids->hph_left_ocp);
+	disable_irq_nosync(mbhc->intr_ids->hph_right_ocp);
+}
+EXPORT_SYMBOL(wcd_mbhc_stop);
+
+int wcd_dt_parse_mbhc_data(struct device *dev, struct wcd_mbhc_config *cfg)
+{
+	struct device_node *np = dev->of_node;
+	int ret, i, microvolt;
+	char prop_str[64];
+
+	if (of_property_read_bool(np, "qcom,hphl-jack-type-normally-closed"))
+		cfg->hphl_swh = true;
+	else
+		cfg->hphl_swh = false;
+
+	if (of_property_read_bool(np, "qcom,ground-jack-type-normally-closed"))
+		cfg->gnd_swh = true;
+	else
+		cfg->gnd_swh = false;
+
+	ret = of_property_read_u32(np, "qcom,mbhc-headset-vthreshold-microvolt",
+				   &microvolt);
+	if (ret)
+		dev_dbg(dev, "missing qcom,mbhc-hs-mic-max-vthreshold--microvolt in dt node\n");
+	else
+		cfg->hs_thr = microvolt/1000;
+
+	ret = of_property_read_u32(np, "qcom,mbhc-headphone-vthreshold-microvolt",
+				   &microvolt);
+	if (ret)
+		dev_dbg(dev, "missing qcom,mbhc-hs-mic-min-vthreshold-microvolt	entry\n");
+	else
+		cfg->hph_thr = microvolt/1000;
+
+	for (i = 0; i < WCD_MBHC_DEF_BUTTONS; i++) {
+		sprintf(prop_str, "qcom,mbhc-button%d-vthreshold-microvolt", i);
+		ret = of_property_read_u32(np, prop_str, &microvolt);
+		if (ret) /* default voltage */
+			microvolt = 500000;
+
+		/* Micro to Milli Volts */
+		cfg->btn_high[i] = microvolt/1000;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(wcd_dt_parse_mbhc_data);
+
+struct wcd_mbhc *wcd_mbhc_init(struct snd_soc_component *component,
+			       const struct wcd_mbhc_cb *mbhc_cb,
+			       const struct wcd_mbhc_intr *intr_ids,
+			       struct wcd_mbhc_field *fields,
+			       bool impedance_det_en)
+{
+	struct device *dev = component->dev;
+	struct wcd_mbhc *mbhc;
+	int ret;
+
+	if (!intr_ids || !fields || !mbhc_cb || !mbhc_cb->mbhc_bias || !mbhc_cb->set_btn_thr) {
+		dev_err(dev, "%s: Insufficient mbhc configuration\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	mbhc = devm_kzalloc(dev, sizeof(*mbhc), GFP_KERNEL);
+	if (!mbhc)
+		return ERR_PTR(-ENOMEM);
+
+	mbhc->component = component;
+	mbhc->dev = dev;
+	mbhc->intr_ids = intr_ids;
+	mbhc->mbhc_cb = mbhc_cb;
+	mbhc->fields = fields;
+	mbhc->mbhc_detection_logic = WCD_DETECTION_ADC;
+
+	if (mbhc_cb->compute_impedance)
+		mbhc->impedance_detect = impedance_det_en;
+
+	INIT_DELAYED_WORK(&mbhc->mbhc_btn_dwork, wcd_btn_long_press_fn);
+
+	mutex_init(&mbhc->lock);
+
+	INIT_WORK(&mbhc->correct_plug_swch, wcd_correct_swch_plug);
+
+	ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_sw_intr, NULL,
+					wcd_mbhc_mech_plug_detect_irq,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					"mbhc sw intr", mbhc);
+	if (ret)
+		goto err;
+
+	ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_btn_press_intr, NULL,
+					wcd_mbhc_btn_press_handler,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					"Button Press detect", mbhc);
+	if (ret)
+		goto err;
+
+	ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_btn_release_intr, NULL,
+					wcd_mbhc_btn_release_handler,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					"Button Release detect", mbhc);
+	if (ret)
+		goto err;
+
+	ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_hs_ins_intr, NULL,
+					wcd_mbhc_adc_hs_ins_irq,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					"Elect Insert", mbhc);
+	if (ret)
+		goto err;
+
+	disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr);
+
+	ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_hs_rem_intr, NULL,
+					wcd_mbhc_adc_hs_rem_irq,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					"Elect Remove", mbhc);
+	if (ret)
+		goto err;
+
+	disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr);
+
+	ret = devm_request_threaded_irq(dev, mbhc->intr_ids->hph_left_ocp, NULL,
+					wcd_mbhc_hphl_ocp_irq,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					"HPH_L OCP detect", mbhc);
+	if (ret)
+		goto err;
+
+	ret = devm_request_threaded_irq(dev, mbhc->intr_ids->hph_right_ocp, NULL,
+					wcd_mbhc_hphr_ocp_irq,
+					IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+					"HPH_R OCP detect", mbhc);
+	if (ret)
+		goto err;
+
+	return mbhc;
+err:
+	dev_err(dev, "Failed to request mbhc interrupts %d\n", ret);
+
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(wcd_mbhc_init);
+
+void wcd_mbhc_deinit(struct wcd_mbhc *mbhc)
+{
+	mutex_lock(&mbhc->lock);
+	wcd_cancel_hs_detect_plug(mbhc,	&mbhc->correct_plug_swch);
+	mutex_unlock(&mbhc->lock);
+}
+EXPORT_SYMBOL(wcd_mbhc_deinit);
+
+static int __init mbhc_init(void)
+{
+	return 0;
+}
+
+static void __exit mbhc_exit(void)
+{
+}
+
+module_init(mbhc_init);
+module_exit(mbhc_exit);
+
+MODULE_DESCRIPTION("wcd MBHC v2 module");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/wcd-mbhc-v2.h b/sound/soc/codecs/wcd-mbhc-v2.h
new file mode 100644
index 000000000000..006118f3e81f
--- /dev/null
+++ b/sound/soc/codecs/wcd-mbhc-v2.h
@@ -0,0 +1,340 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __WCD_MBHC_V2_H__
+#define __WCD_MBHC_V2_H__
+
+#include <sound/jack.h>
+
+#define WCD_MBHC_FIELD(id, rreg, rmask) \
+	[id] = { .reg = rreg, .mask = rmask }
+
+enum wcd_mbhc_field_function {
+	WCD_MBHC_L_DET_EN,
+	WCD_MBHC_GND_DET_EN,
+	WCD_MBHC_MECH_DETECTION_TYPE,
+	WCD_MBHC_MIC_CLAMP_CTL,
+	WCD_MBHC_ELECT_DETECTION_TYPE,
+	WCD_MBHC_HS_L_DET_PULL_UP_CTRL,
+	WCD_MBHC_HS_L_DET_PULL_UP_COMP_CTRL,
+	WCD_MBHC_HPHL_PLUG_TYPE,
+	WCD_MBHC_GND_PLUG_TYPE,
+	WCD_MBHC_SW_HPH_LP_100K_TO_GND,
+	WCD_MBHC_ELECT_SCHMT_ISRC,
+	WCD_MBHC_FSM_EN,
+	WCD_MBHC_INSREM_DBNC,
+	WCD_MBHC_BTN_DBNC,
+	WCD_MBHC_HS_VREF,
+	WCD_MBHC_HS_COMP_RESULT,
+	WCD_MBHC_IN2P_CLAMP_STATE,
+	WCD_MBHC_MIC_SCHMT_RESULT,
+	WCD_MBHC_HPHL_SCHMT_RESULT,
+	WCD_MBHC_HPHR_SCHMT_RESULT,
+	WCD_MBHC_OCP_FSM_EN,
+	WCD_MBHC_BTN_RESULT,
+	WCD_MBHC_BTN_ISRC_CTL,
+	WCD_MBHC_ELECT_RESULT,
+	WCD_MBHC_MICB_CTRL,    /* Pull-up and micb control */
+	WCD_MBHC_HPH_CNP_WG_TIME,
+	WCD_MBHC_HPHR_PA_EN,
+	WCD_MBHC_HPHL_PA_EN,
+	WCD_MBHC_HPH_PA_EN,
+	WCD_MBHC_SWCH_LEVEL_REMOVE,
+	WCD_MBHC_PULLDOWN_CTRL,
+	WCD_MBHC_ANC_DET_EN,
+	WCD_MBHC_FSM_STATUS,
+	WCD_MBHC_MUX_CTL,
+	WCD_MBHC_MOISTURE_STATUS,
+	WCD_MBHC_HPHR_GND,
+	WCD_MBHC_HPHL_GND,
+	WCD_MBHC_HPHL_OCP_DET_EN,
+	WCD_MBHC_HPHR_OCP_DET_EN,
+	WCD_MBHC_HPHL_OCP_STATUS,
+	WCD_MBHC_HPHR_OCP_STATUS,
+	WCD_MBHC_ADC_EN,
+	WCD_MBHC_ADC_COMPLETE,
+	WCD_MBHC_ADC_TIMEOUT,
+	WCD_MBHC_ADC_RESULT,
+	WCD_MBHC_MICB2_VOUT,
+	WCD_MBHC_ADC_MODE,
+	WCD_MBHC_DETECTION_DONE,
+	WCD_MBHC_ELECT_ISRC_EN,
+	WCD_MBHC_REG_FUNC_MAX,
+};
+
+#define WCD_MBHC_DEF_BUTTONS 8
+#define WCD_MBHC_KEYCODE_NUM 8
+#define WCD_MBHC_USLEEP_RANGE_MARGIN_US 100
+#define WCD_MBHC_THR_HS_MICB_MV  2700
+#define WCD_MONO_HS_MIN_THR	2
+
+enum wcd_mbhc_detect_logic {
+	WCD_DETECTION_LEGACY,
+	WCD_DETECTION_ADC,
+};
+
+enum wcd_mbhc_cs_mb_en_flag {
+	WCD_MBHC_EN_CS = 0,
+	WCD_MBHC_EN_MB,
+	WCD_MBHC_EN_PULLUP,
+	WCD_MBHC_EN_NONE,
+};
+
+enum {
+	WCD_MBHC_ELEC_HS_INS,
+	WCD_MBHC_ELEC_HS_REM,
+};
+
+enum wcd_mbhc_plug_type {
+	MBHC_PLUG_TYPE_INVALID = -1,
+	MBHC_PLUG_TYPE_NONE,
+	MBHC_PLUG_TYPE_HEADSET,
+	MBHC_PLUG_TYPE_HEADPHONE,
+	MBHC_PLUG_TYPE_HIGH_HPH,
+	MBHC_PLUG_TYPE_GND_MIC_SWAP,
+};
+
+enum pa_dac_ack_flags {
+	WCD_MBHC_HPHL_PA_OFF_ACK = 0,
+	WCD_MBHC_HPHR_PA_OFF_ACK,
+};
+
+enum wcd_mbhc_btn_det_mem {
+	WCD_MBHC_BTN_DET_V_BTN_LOW,
+	WCD_MBHC_BTN_DET_V_BTN_HIGH
+};
+
+enum {
+	MIC_BIAS_1 = 1,
+	MIC_BIAS_2,
+	MIC_BIAS_3,
+	MIC_BIAS_4
+};
+
+enum {
+	MICB_PULLUP_ENABLE,
+	MICB_PULLUP_DISABLE,
+	MICB_ENABLE,
+	MICB_DISABLE,
+};
+
+enum wcd_notify_event {
+	WCD_EVENT_INVALID,
+	/* events for micbias ON and OFF */
+	WCD_EVENT_PRE_MICBIAS_2_OFF,
+	WCD_EVENT_POST_MICBIAS_2_OFF,
+	WCD_EVENT_PRE_MICBIAS_2_ON,
+	WCD_EVENT_POST_MICBIAS_2_ON,
+	WCD_EVENT_PRE_DAPM_MICBIAS_2_OFF,
+	WCD_EVENT_POST_DAPM_MICBIAS_2_OFF,
+	WCD_EVENT_PRE_DAPM_MICBIAS_2_ON,
+	WCD_EVENT_POST_DAPM_MICBIAS_2_ON,
+	/* events for PA ON and OFF */
+	WCD_EVENT_PRE_HPHL_PA_ON,
+	WCD_EVENT_POST_HPHL_PA_OFF,
+	WCD_EVENT_PRE_HPHR_PA_ON,
+	WCD_EVENT_POST_HPHR_PA_OFF,
+	WCD_EVENT_PRE_HPHL_PA_OFF,
+	WCD_EVENT_PRE_HPHR_PA_OFF,
+	WCD_EVENT_OCP_OFF,
+	WCD_EVENT_OCP_ON,
+	WCD_EVENT_LAST,
+};
+
+enum wcd_mbhc_event_state {
+	WCD_MBHC_EVENT_PA_HPHL,
+	WCD_MBHC_EVENT_PA_HPHR,
+};
+
+enum wcd_mbhc_hph_type {
+	WCD_MBHC_HPH_NONE = 0,
+	WCD_MBHC_HPH_MONO,
+	WCD_MBHC_HPH_STEREO,
+};
+
+/*
+ * These enum definitions are directly mapped to the register
+ * definitions
+ */
+
+enum mbhc_hs_pullup_iref {
+	I_DEFAULT = -1,
+	I_OFF = 0,
+	I_1P0_UA,
+	I_2P0_UA,
+	I_3P0_UA,
+};
+
+enum mbhc_hs_pullup_iref_v2 {
+	HS_PULLUP_I_DEFAULT = -1,
+	HS_PULLUP_I_3P0_UA = 0,
+	HS_PULLUP_I_2P25_UA,
+	HS_PULLUP_I_1P5_UA,
+	HS_PULLUP_I_0P75_UA,
+	HS_PULLUP_I_1P125_UA = 0x05,
+	HS_PULLUP_I_0P375_UA = 0x07,
+	HS_PULLUP_I_2P0_UA,
+	HS_PULLUP_I_1P0_UA = 0x0A,
+	HS_PULLUP_I_0P5_UA,
+	HS_PULLUP_I_0P25_UA = 0x0F,
+	HS_PULLUP_I_0P125_UA = 0x17,
+	HS_PULLUP_I_OFF,
+};
+
+enum mbhc_moisture_rref {
+	R_OFF,
+	R_24_KOHM,
+	R_84_KOHM,
+	R_184_KOHM,
+};
+
+struct wcd_mbhc_config {
+	int btn_high[WCD_MBHC_DEF_BUTTONS];
+	int btn_low[WCD_MBHC_DEF_BUTTONS];
+	int v_hs_max;
+	int num_btn;
+	bool mono_stero_detection;
+	bool (*swap_gnd_mic)(struct snd_soc_component *component, bool active);
+	bool hs_ext_micbias;
+	bool gnd_det_en;
+	uint32_t linein_th;
+	bool moisture_en;
+	int mbhc_micbias;
+	int anc_micbias;
+	bool moisture_duty_cycle_en;
+	bool hphl_swh; /*track HPHL switch NC / NO */
+	bool gnd_swh; /*track GND switch NC / NO */
+	u32 hs_thr;
+	u32 hph_thr;
+	u32 micb_mv;
+	u32 moist_vref;
+	u32 moist_iref;
+	u32 moist_rref;
+};
+
+struct wcd_mbhc_intr {
+	int mbhc_sw_intr;
+	int mbhc_btn_press_intr;
+	int mbhc_btn_release_intr;
+	int mbhc_hs_ins_intr;
+	int mbhc_hs_rem_intr;
+	int hph_left_ocp;
+	int hph_right_ocp;
+};
+
+struct wcd_mbhc_field {
+	u16 reg;
+	u8 mask;
+};
+
+struct wcd_mbhc;
+
+struct wcd_mbhc_cb {
+	void (*update_cross_conn_thr)(struct snd_soc_component *component);
+	void (*get_micbias_val)(struct snd_soc_component *component, int *mb);
+	void (*bcs_enable)(struct snd_soc_component *component, bool bcs_enable);
+	void (*compute_impedance)(struct snd_soc_component *component,
+				  uint32_t *zl, uint32_t *zr);
+	void (*set_micbias_value)(struct snd_soc_component *component);
+	void (*set_auto_zeroing)(struct snd_soc_component *component,
+			bool enable);
+	void (*clk_setup)(struct snd_soc_component *component, bool enable);
+	bool (*micbias_enable_status)(struct snd_soc_component *component, int micb_num);
+	void (*mbhc_bias)(struct snd_soc_component *component, bool enable);
+	void (*set_btn_thr)(struct snd_soc_component *component,
+			    int *btn_low, int *btn_high,
+			    int num_btn, bool is_micbias);
+	void (*hph_pull_up_control)(struct snd_soc_component *component,
+				    enum mbhc_hs_pullup_iref);
+	int (*mbhc_micbias_control)(struct snd_soc_component *component,
+			int micb_num, int req);
+	void (*mbhc_micb_ramp_control)(struct snd_soc_component *component,
+			bool enable);
+	bool (*extn_use_mb)(struct snd_soc_component *component);
+	int (*mbhc_micb_ctrl_thr_mic)(struct snd_soc_component *component,
+			int micb_num, bool req_en);
+	void (*mbhc_gnd_det_ctrl)(struct snd_soc_component *component,
+			bool enable);
+	void (*hph_pull_down_ctrl)(struct snd_soc_component *component,
+			bool enable);
+	void (*mbhc_moisture_config)(struct snd_soc_component *component);
+	void (*update_anc_state)(struct snd_soc_component *component,
+			bool enable, int anc_num);
+	void (*hph_pull_up_control_v2)(struct snd_soc_component *component,
+			int pull_up_cur);
+	bool (*mbhc_get_moisture_status)(struct snd_soc_component *component);
+	void (*mbhc_moisture_polling_ctrl)(struct snd_soc_component *component, bool enable);
+	void (*mbhc_moisture_detect_en)(struct snd_soc_component *component, bool enable);
+};
+
+#if IS_ENABLED(CONFIG_SND_SOC_WCD_MBHC)
+int wcd_dt_parse_mbhc_data(struct device *dev, struct wcd_mbhc_config *cfg);
+int wcd_mbhc_start(struct wcd_mbhc *mbhc, struct wcd_mbhc_config *mbhc_cfg,
+		   struct snd_soc_jack *jack);
+void wcd_mbhc_stop(struct wcd_mbhc *mbhc);
+void wcd_mbhc_set_hph_type(struct wcd_mbhc *mbhc, int hph_type);
+int wcd_mbhc_get_hph_type(struct wcd_mbhc *mbhc);
+struct wcd_mbhc *wcd_mbhc_init(struct snd_soc_component *component,
+		      const struct wcd_mbhc_cb *mbhc_cb,
+		      const struct wcd_mbhc_intr *mbhc_cdc_intr_ids,
+		      struct wcd_mbhc_field *fields,
+		      bool impedance_det_en);
+int wcd_mbhc_get_impedance(struct wcd_mbhc *mbhc, uint32_t *zl,
+			   uint32_t *zr);
+void wcd_mbhc_deinit(struct wcd_mbhc *mbhc);
+int wcd_mbhc_event_notify(struct wcd_mbhc *mbhc, unsigned long event);
+
+#else
+static inline int wcd_dt_parse_mbhc_data(struct device *dev,
+					 struct wcd_mbhc_config *cfg)
+{
+	return -ENOTSUPP;
+}
+
+static inline void wcd_mbhc_stop(struct wcd_mbhc *mbhc)
+{
+}
+
+static inline struct wcd_mbhc *wcd_mbhc_init(struct snd_soc_component *component,
+		      const struct wcd_mbhc_cb *mbhc_cb,
+		      const struct wcd_mbhc_intr *mbhc_cdc_intr_ids,
+		      struct wcd_mbhc_field *fields,
+		      bool impedance_det_en)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+
+static inline void wcd_mbhc_set_hph_type(struct wcd_mbhc *mbhc, int hph_type)
+{
+}
+
+static inline int wcd_mbhc_get_hph_type(struct wcd_mbhc *mbhc)
+{
+	return -ENOTSUPP;
+}
+
+static inline int wcd_mbhc_event_notify(struct wcd_mbhc *mbhc, unsigned long event)
+{
+	return -ENOTSUPP;
+}
+
+static inline int wcd_mbhc_start(struct wcd_mbhc *mbhc,
+				 struct wcd_mbhc_config *mbhc_cfg,
+				 struct snd_soc_jack *jack)
+{
+	return 0;
+}
+
+static inline int wcd_mbhc_get_impedance(struct wcd_mbhc *mbhc,
+					 uint32_t *zl,
+					 uint32_t *zr)
+{
+	*zl = 0;
+	*zr = 0;
+	return -EINVAL;
+}
+static inline void wcd_mbhc_deinit(struct wcd_mbhc *mbhc)
+{
+}
+#endif
+
+#endif /* __WCD_MBHC_V2_H__ */