@@ -10,6 +10,7 @@
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,apr.h>
/ {
interrupt-parent = <&intc>;
@@ -521,6 +522,9 @@ modem_smp2p_in: slave-kernel {
};
};
+ sound: sound {
+ };
+
thermal-zones {
aoss-thermal {
polling-delay-passive = <250>;
@@ -1882,6 +1886,85 @@ mmss_smmu: iommu@cd00000 {
status = "disabled";
};
+ adsp_pil: remoteproc@15700000 {
+ compatible = "qcom,sdm660-adsp-pil";
+ reg = <0x15700000 0x4040>;
+
+ interrupts-extended =
+ <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_region>;
+ power-domains = <&rpmpd SDM660_VDDCX>;
+ power-domain-names = "cx";
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
+
+ label = "lpass";
+ mboxes = <&apcs_glb 9>;
+ qcom,remote-pid = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6core {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ };
+
+ q6afe: apr-service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6asm: apr-service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&lpass_smmu 1>;
+ };
+ };
+
+ q6adm: apr-service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+ };
+ };
+
gnoc: interconnect@17900000 {
compatible = "qcom,sdm660-gnoc";
reg = <0x17900000 0xe000>;
Configure the ADSP remote processor and add a simple sound{} node to make way for future development. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- arch/arm64/boot/dts/qcom/sdm630.dtsi | 83 ++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+)