new file mode 100644
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+ Circuit (MUIC).
+
+ See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ const: maxim,max77693-charger
+
+ maxim,constant-microvolt:
+ description: |
+ Battery constant voltage in uV. The charger will operate in fast
+ charge constant current mode till battery voltage reaches this level.
+ Then the charger will switch to fast charge constant voltage mode.
+ Also vsys (system voltage) will be set to this value when DC power is
+ supplied but charger is not enabled.
+ Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+ minimum: 3650000
+ maximum: 4400000
+ default: 4200000
+
+ maxim,min-system-microvolt:
+ description: |
+ Minimal system voltage in uV.
+ enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+ 3600000, 3700000]
+ default: 3600000
+
+ maxim,thermal-regulation-celsius:
+ description: |
+ Temperature in Celsius for entering high temperature charging mode.
+ If die temperature exceeds this value the charging current will be
+ reduced by 105 mA/Celsius.
+ enum: [70, 85, 100, 115]
+ default: 100
+
+ maxim,battery-overcurrent-microamp:
+ description: |
+ Overcurrent protection threshold in uA (current from battery to
+ system).
+ Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+ minimum: 2000000
+ maximum: 3500000
+ default: 3500000
+
+ maxim,charge-input-threshold-microvolt:
+ description: |
+ Threshold voltage in uV for triggering input voltage regulation loop.
+ If input voltage decreases below this value, the input current will
+ be reduced to reach the threshold voltage.
+ enum: [4300000, 4700000, 4800000, 4900000]
+ default: 4300000
+
+required:
+ - compatible
+
+additionalProperties: false
@@ -11681,6 +11681,7 @@ M: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
+F: Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
F: drivers/power/supply/max14577_charger.c
F: drivers/power/supply/max77693_charger.c
Convert the Charger bindings of Maxim MAX77693 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max77693.txt. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/power/supply/maxim,max77693.yaml | 70 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 71 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml