diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 9db743826391..54998e108092 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
index 67680a13c234..dcd10d0ead1e 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
@@ -26,7 +26,7 @@
 
 / {
 	model = "Google Herobrine (rev0)";
-	compatible = "google,herobrine",
+	compatible = "google,herobrine-rev0",
 		     "qcom,sc7280";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
new file mode 100644
index 000000000000..c57bd689df23
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+
+/ {
+	model = "Google Herobrine (rev1+)";
+	compatible = "google,herobrine",
+		     "qcom,sc7280";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&ap_spi_fp {
+	status = "okay";
+};
+
+/*
+ * Although the trackpad is really part of the herobrine baseboard, we'll
+ * put the actual definition in the board device tree since different boards
+ * might hook up different trackpads (or no i2c trackpad at all in the case
+ * of tablets / detachables).
+ */
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+/*
+ * The touchscreen connector might come off the Qcard, at least in the case of
+ * eDP. Like the trackpad, we'll put it in the board device tree file since
+ * different boards have different touchscreens.
+ */
+ts_i2c: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&ts_avdd>;
+	};
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* For SD Card */
+&sdhc_2 {
+	status = "okay";
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "SC_GPIO_81",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
new file mode 100644
index 000000000000..157da25cc5a8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine baseboard device tree source
+ *
+ * The set of things in this file is a bit loosely defined. It's roughly
+ * defined as the set of things that the child boards happen to have in
+ * common. Since all of the child boards started from the same original
+ * design this is hopefully a large set of things but as more derivatives
+ * appear things may "bubble down" out of this file. For things that are
+ * part of the reference design but might not exist on child nodes we will
+ * follow the lead of the SoC dtsi files and leave their status as "disabled".
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+
+#include "sc7280-qcard.dtsi"
+#include "sc7280-chrome-common.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/*
+	 * FIXED REGULATORS
+	 *
+	 * Sort order:
+	 * 1. parents above children.
+	 * 2. higher voltage above lower voltage.
+	 * 3. alphabetically by node name.
+	 */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_s5: pp5000-s5-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_s5";
+
+		/* EC turns on with en_pp5000_s5; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_z1: pp3300-z1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z1";
+
+		/* EC turns on with en_pp3300_z1; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_codec: pp3300-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_codec";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 105 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_codec>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_left_in_mlb: pp3300-left-in-mlb {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_left_in_mlb";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_mcu_fp:
+	pp3300_fp_ls:
+	pp3300_fp_mcu: pp3300-fp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_fp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		/*
+		 * WARNING: it is intentional that GPIO 77 isn't listed here.
+		 * The userspace script for updating the fingerprint firmware
+		 * needs to control the FP regulators during a FW update,
+		 * hence the signal can't be owned by the kernel regulator.
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_fp_rails>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_hub: pp3300-hub-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_hub";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hub_en>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_tp: pp3300-tp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_tp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* AP turns on with PP1800_L18B_S0; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_ssd: pp3300-ssd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_ssd";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd_en>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp2850_vcm_wf_cam: pp2850-vcm-wf-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_vcm_wf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wf_cam_en>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp2850_wf_cam: pp2850-wf-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_wf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp1800_fp: pp1800-fp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_fp";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		/*
+		 * WARNING: it is intentional that GPIO 77 isn't listed here.
+		 * The userspace script for updating the fingerprint firmware
+		 * needs to control the FP regulators during a FW update,
+		 * hence the signal can't be owned by the kernel regulator.
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_fp_rails>;
+
+		vin-supply = <&pp1800_l18b_s0>;
+		status = "disabled";
+	};
+
+	pp1800_wf_cam: pp1800-wf-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_wf_cam";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&vreg_l19b_s0>;
+	};
+
+	pp1200_wf_cam: pp1200-wf-cam {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_wf_cam";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	pwmleds {
+		compatible = "pwm-leds";
+		status = "disabled";
+		keyboard_backlight: keyboard-backlight {
+			status = "disabled";
+			label = "cros_ec::kbd_backlight";
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+/*
+ * BOARD-LOCAL NAMES FOR REGULATORS THAT CONNECT TO QCARD
+ *
+ * Names are only listed here if regulators go somewhere other than a
+ * testpoint.
+ */
+
+/* From Qcard to our board; ordered by PMIC-ID / rail number */
+
+pp1256_s8b: &vreg_s8b_1p256 {};
+
+pp1800_l18b_s0: &vreg_l18b_1p8 {};
+pp1800_l18b:    &vreg_l18b_1p8 {};
+
+vreg_l19b_s0: &vreg_l19b_1p8 {};
+
+pp1800_alc5682: &vreg_l2c_1p8 {};
+pp1800_l2c:     &vreg_l2c_1p8 {};
+
+vreg_l4c: &vreg_l4c_1p8_3p0 {};
+
+ppvar_l6c: &vreg_l6c_2p96 {};
+
+pp3000_l7c: &vreg_l7c_3p0 {};
+
+pp1800_prox: &vreg_l8c_1p8 {};
+pp1800_l8c:  &vreg_l8c_1p8 {};
+
+pp2950_l9c: &vreg_l9c_2p96 {};
+
+pp1800_lcm:  &vreg_l12c_1p8 {};
+pp1800_mipi: &vreg_l12c_1p8 {};
+pp1800_l12c: &vreg_l12c_1p8 {};
+
+pp3300_lcm:  &vreg_l13c_3p0 {};
+pp3300_mipi: &vreg_l13c_3p0 {};
+pp3300_l13c: &vreg_l13c_3p0 {};
+
+/* From our board to Qcard; ordered same as node definition above */
+
+vreg_edp_bl: &ppvar_sys {};
+
+ts_avdd:      &pp3300_left_in_mlb {};
+vreg_edp_3p3: &pp3300_left_in_mlb {};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_i2c_tpm: &i2c14 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gsc_ap_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <104 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+/* For nvme; not all herobrine boards have; boards set status = "okay" */
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>;
+
+	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&pp3300_ssd>;
+};
+
+&pmk8350_rtc {
+	status = "disabled";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+/* For SD Card; not all herobrine boards have; boards set status = "okay" */
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_on>;
+	pinctrl-1 = <&sdc2_off>;
+
+	vmmc-supply = <&pp2950_l9c>;
+	vqmmc-supply = <&ppvar_l6c>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
+/* Not all herobrine boards have fingerprint; boards set status = "okay" */
+ap_spi_fp: &spi9 {
+	pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>;
+
+	cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	cros_ec_fp: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+ap_ec_spi: &spi10 {
+	status = "okay";
+	pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+
+	cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: ec-pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&qspi_cs0 {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&qspi_clk {
+	drive-strength = <8>;
+	bias-disable;
+};
+
+&qspi_data01 {
+	drive-strength = <8>;
+	/* High-Z when no transfers; nice to park the lines */
+	bias-pull-up;
+};
+
+/* For ap_tp_i2c */
+&qup_i2c0_data_clk {
+	drive-strength = <2>;
+	/* Has external pull */
+	bias-disable;
+};
+
+/* For ap_i2c_tpm */
+&qup_i2c14_data_clk {
+	drive-strength = <2>;
+	/* Has external pull */
+	bias-disable;
+};
+
+/* For ap_spi_fp */
+&qup_spi9_data_clk {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* For ap_spi_fp */
+&qup_spi9_cs_gpio {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* For ap_ec_spi */
+&qup_spi10_data_clk {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* For ap_ec_spi */
+&qup_spi10_cs_gpio {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* For uart_dbg */
+&qup_uart5_rx {
+	bias-pull-up;
+};
+
+/* For uart_dbg */
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&sdc2_on {
+	clk {
+		bias-disable;
+		drive-strength = <16>;
+	};
+
+	cmd {
+		bias-pull-up;
+		drive-strength = <10>;
+	};
+
+	data {
+		bias-pull-up;
+		drive-strength = <10>;
+	};
+
+	sd-cd {
+		pins = "gpio91";
+		bias-pull-up;
+	};
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm7325_gpios {
+	/*
+	 * On a quick glance it might look like KYPD_VOL_UP_N is used, but
+	 * that only passes through to a debug connector and not to the actual
+	 * volume up key.
+	 */
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&pmk8350_gpios {
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&tlmm {
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&bios_flash_wp_od>;
+
+	amp_en: amp-en {
+		pins = "gpio63";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ap_ec_int_l: ap-ec-int-l {
+		pins = "gpio18";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	bios_flash_wp_od: bios-flash-wp-od {
+		pins = "gpio16";
+		function = "gpio";
+		/* Has external pull */
+		bias-disable;
+	};
+
+	en_fp_rails: en-fp-rails {
+		pins = "gpio77";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	en_pp3300_codec: en-pp3300-codec {
+		pins = "gpio105";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	hub_en: hub-en {
+		pins = "gpio157";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	fp_rst_l: fp-rst-l {
+		pins = "gpio78";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	fp_to_ap_irq_l: fp-to-ap-irq-l {
+		pins = "gpio61";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	fpmcu_boot0: fpmcu-boot0 {
+		pins = "gpio68";
+		function = "gpio";
+		bias-disable;
+		output-low;
+	};
+
+	gsc_ap_int_odl: gsc-ap-int-odl {
+		pins = "gpio104";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	hp_irq: hp-irq {
+		pins = "gpio101";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	pe_wake_odl: pe-wake-odl {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		/* Has external pull */
+		bias-disable;
+	};
+
+	/* For ap_spi_fp */
+	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high {
+		pins = "gpio39";
+		function = "gpio";
+		output-high;
+	};
+
+	/* For ap_ec_spi */
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+		pins = "gpio43";
+		function = "gpio";
+		output-high;
+	};
+
+	sar0_irq_odl: sar0-irq-odl {
+		pins = "gpio141";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	sar1_irq_odl: sar0-irq-odl {
+		pins = "gpio140";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ssd_en: ssd-en {
+		pins = "gpio51";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ssd_rst_l: ssd-rst-l {
+		pins = "gpio2";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	tp_int_odl: tp-int-odl {
+		pins = "gpio7";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	wf_cam_en: wf-cam-en {
+		pins = "gpio119";
+		function = "gpio";
+		drive-strength = <2>;
+		/* Has external pulldown */
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
new file mode 100644
index 000000000000..caff21d1e588
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 Qcard device tree source
+ *
+ * Qcard PCB has the processor, RAM, eMMC (if stuffed), and eDP connector (if
+ * stuffed) on it. This device tree tries to encapsulate all the things that
+ * all boards using Qcard will have in common. Given that there are stuffing
+ * options, some things may be left with status "disabled" and enabled in
+ * the actual board device tree files.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc7280.dtsi"
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial0 = &uart5;
+		serial1 = &uart7;
+	};
+};
+
+&apps_rsc {
+	/*
+	 * Regulators are given labels corresponding to the various names
+	 * they are referred to on schematics. They are also given labels
+	 * corresponding to named voltage inputs on the SoC or components
+	 * bundled with the SoC (like radio companion chips). We totally
+	 * ignore it when one regulator is the input to another regulator.
+	 * That's handled automatically by the initial config given to
+	 * RPMH by the firmware.
+	 *
+	 * Regulators that the HLOS (High Level OS) doesn't touch at all
+	 * are left out of here since they are managed elsewhere.
+	 */
+
+	pm7325-regulators {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd19_pmu_pcie_i:
+		vdd19_pmu_rfa_i:
+		vreg_s1b_1p856: smps1 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vdd_pmu_aon_i:
+		vdd09_pmu_rfa_i:
+		vdd095_mx_pmu:
+		vdd095_pmu:
+		vreg_s7b_0p952: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vdd13_pmu_rfa_i:
+		vdd13_pmu_pcie_i:
+		vreg_s8b_1p256: smps8 {
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1500000>;
+		};
+
+		vdd_a_usbssdp_0_core:
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_usbhs_3p1:
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_0_1_1p2:
+		vdd_a_csi_2_3_1p2:
+		vdd_a_csi_4_1p2:
+		vdd_a_dsi_0_1p2:
+		vdd_a_edp_0_1p2:
+		vdd_a_qlink_0_1p2:
+		vdd_a_qlink_1_1p2:
+		vdd_a_pcie_0_1p2:
+		vdd_a_pcie_1_1p2:
+		vdd_a_ufs_0_1p2:
+		vdd_a_usbssdp_0_1p2:
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * Despite the fact that this is named to be 2.5V on the
+		 * schematic, it powers eMMC which doesn't accept 2.5V
+		 */
+		vreg_l7b_2p5: ldo7 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px_wcd9385:
+		vdd_txrx:
+		vddpx_0:
+		vddpx_3:
+		vddpx_7:
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_1p8:
+		vdd_px_sdr735:
+		vdd_pxm:
+		vdd18_io:
+		vddio_px_1:
+		vddio_px_2:
+		vddio_px_3:
+		vddpx_ts:
+		vddpx_wl4otp:
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd22_wlbtpa_ch0:
+		vdd22_wlbtpa_ch1:
+		vdd22_wlbtppa_ch0:
+		vdd22_wlbtppa_ch1:
+		vdd22_wlpa5g_ch0:
+		vdd22_wlpa5g_ch1:
+		vdd22_wlppa5g_ch0:
+		vdd22_wlppa5g_ch1:
+		vreg_s1c_2p2: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		lp4_vdd2_1p052:
+		vreg_s9c_0p676: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_turing_q6_cs_1p8:
+		vdd_a_cxo_1p8:
+		vdd_a_qrefs_1p8:
+		vdd_a_usbhs_1p8:
+		vdd_qfprom:
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8_3p0: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8_3p0: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_0_1_0p9:
+		vdd_a_csi_2_3_0p9:
+		vdd_a_csi_4_0p9:
+		vdd_a_dsi_0_0p9:
+		vdd_a_dsi_0_pll_0p9:
+		vdd_a_edp_0_0p9:
+		vdd_a_gnss_0p9:
+		vdd_a_pcie_0_core:
+		vdd_a_pcie_1_core:
+		vdd_a_qlink_0_0p9:
+		vdd_a_qlink_0_0p9_ck:
+		vdd_a_qlink_1_0p9:
+		vdd_a_qlink_1_0p9_ck:
+		vdd_a_qrefs_0p875_0:
+		vdd_a_qrefs_0p875_1:
+		vdd_a_qrefs_0p875_2:
+		vdd_a_qrefs_0p875_3:
+		vdd_a_qrefs_0p875_4_5:
+		vdd_a_qrefs_0p875_6:
+		vdd_a_qrefs_0p875_7:
+		vdd_a_qrefs_0p875_8:
+		vdd_a_qrefs_0p875_9:
+		vdd_a_ufs_0_core:
+		vdd_a_usbhs_core:
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_flash:
+		vdd_iris_rgb:
+		vdd_mic_bias:
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&ipa {
+	status = "okay";
+	modem-init;
+};
+
+/* For nvme; boards set status = "okay" */
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pmk8350_vadc {
+	pmk8350-die-temp@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pmr735a-die-temp@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&qfprom {
+	vcc-supply = <&vdd_qfprom>;
+};
+
+/* For eMMC; not all Qcards have eMMC stuffed; boards set status = "okay" */
+&sdhc_1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc1_on>;
+	pinctrl-1 = <&sdc1_off>;
+
+	vmmc-supply = <&vreg_l7b_2p5>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+uart_dbg: &uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+mos_bt_uart: &uart7 {
+	status = "okay";
+
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mos_bt_en>;
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vddaon-supply = <&vreg_s7b_0p952>;
+		vddbtcxmx-supply = <&vreg_s7b_0p952>;
+		vddrfacmn-supply = <&vreg_s7b_0p952>;
+		vddrfa0p8-supply = <&vreg_s7b_0p952>;
+		vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
+		vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		vddio-supply = <&vreg_l18b_1p8>;
+		max-speed = <3200000>;
+	};
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdd_a_usbssdp_0_1p2>;
+	vdda-pll-supply = <&vdd_a_usbssdp_0_core>;
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+};
+
+/*
+ * PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES
+ *
+ * NOTE: In general if pins leave the Qcard then the pinctrl goes in the
+ * baseboard or board device tree, not here.
+ */
+
+/*
+ * For ts_i2c
+ *
+ * Technically this i2c bus actually leaves the Qcard, but it leaves directly
+ * via the eDP connector (it doesn't hit the baseboard). The external pulls
+ * are on Qcard.
+ */
+&qup_i2c13_data_clk {
+	drive-strength = <2>;
+	/* Has external pull */
+	bias-disable;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+/* eMMC, if stuffed, is straight on the Qcard */
+&sdc1_on {
+	clk {
+		bias-disable;
+		drive-strength = <16>;
+	};
+
+	cmd {
+		bias-pull-up;
+		drive-strength = <10>;
+	};
+
+	data {
+		bias-pull-up;
+		drive-strength = <10>;
+	};
+
+	rclk {
+		bias-pull-down;
+	};
+};
+
+/*
+ * PINCTRL - QCARD
+ *
+ * This has entries that are defined by Qcard even if they go to the main
+ * board. In cases where the pulls may be board dependent we defer those
+ * settings to the board device tree. Drive strengths tend to be assinged here
+ * but could conceivably be overwridden by board device trees.
+ */
+
+&pm8350c_gpios {
+	pmic_edp_bl_en: pmic-edp-bl-en {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-disable;
+
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
+	};
+
+	pmic_edp_bl_pwm: pmic-edp-bl-pwm {
+		pins = "gpio8";
+		function = "func1";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-disable;
+		output-low;
+		power-source = <0>;
+	};
+};
+
+&tlmm {
+	mos_bt_en: mos-bt-en {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		output-low;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a pull-down on CTS to match the pull of
+		 * the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	ts_int_conn: ts-int-conn {
+		pins = "gpio55";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_rst_conn: ts-rst-conn {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
