diff mbox series

[09/11] ARM: dts: qcom: align PMIC GPIO pin configuration with DT schema

Message ID 20220507194913.261121-10-krzysztof.kozlowski@linaro.org
State Accepted
Commit 4fcdaf4b0320f93d0ccb4d36b795ed258fb07b27
Headers show
Series [01/11] dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU | expand

Commit Message

Krzysztof Kozlowski May 7, 2022, 7:49 p.m. UTC 
DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix.  Optional children should be either 'pinconf' or
followed with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../arm/boot/dts/qcom-apq8060-dragonboard.dts | 20 +++++++++----------
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts   |  4 ++--
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts    |  8 ++++----
 .../qcom-apq8064-sony-xperia-lagan-yuga.dts   |  2 +-
 arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi    |  2 +-
 .../qcom-msm8974-lge-nexus5-hammerhead.dts    |  8 ++++----
 .../dts/qcom-msm8974-sony-xperia-rhine.dtsi   |  2 +-
 .../dts/qcom-msm8974pro-fairphone-fp2.dts     |  2 +-
 .../boot/dts/qcom-msm8974pro-samsung-klte.dts | 14 ++++++-------
 ...-msm8974pro-sony-xperia-shinano-castor.dts | 10 +++++-----
 arch/arm/boot/dts/qcom-pm8941.dtsi            |  2 +-
 11 files changed, 37 insertions(+), 37 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 138d6478ac84..a104acbfee05 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -273,7 +273,7 @@  MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
 				};
 
 				gpio@150 {
-					dragon_ethernet_gpios: ethernet-gpios {
+					dragon_ethernet_gpios: ethernet-state {
 						pinconf {
 							pins = "gpio7";
 							function = "normal";
@@ -282,7 +282,7 @@  pinconf {
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_bmp085_gpios: bmp085-gpios {
+					dragon_bmp085_gpios: bmp085-state {
 						pinconf {
 							pins = "gpio16";
 							function = "normal";
@@ -291,7 +291,7 @@  pinconf {
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_mpu3050_gpios: mpu3050-gpios {
+					dragon_mpu3050_gpios: mpu3050-state {
 						pinconf {
 							pins = "gpio17";
 							function = "normal";
@@ -300,7 +300,7 @@  pinconf {
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_sdcc3_gpios: sdcc3-gpios {
+					dragon_sdcc3_gpios: sdcc3-state {
 						pinconf {
 							pins = "gpio22";
 							function = "normal";
@@ -309,7 +309,7 @@  pinconf {
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_sdcc5_gpios: sdcc5-gpios {
+					dragon_sdcc5_gpios: sdcc5-state {
 						pinconf {
 							pins = "gpio26";
 							function = "normal";
@@ -319,7 +319,7 @@  pinconf {
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_ak8975_gpios: ak8975-gpios {
+					dragon_ak8975_gpios: ak8975-state {
 						pinconf {
 							pins = "gpio33";
 							function = "normal";
@@ -328,9 +328,9 @@  pinconf {
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_cm3605_gpios: cm3605-gpios {
+					dragon_cm3605_gpios: cm3605-state {
 						/* Pin 34 connected to the proxy IRQ */
-						pinconf_gpio34 {
+						gpio34-pins {
 							pins = "gpio34";
 							function = "normal";
 							input-enable;
@@ -338,7 +338,7 @@  pinconf_gpio34 {
 							power-source = <PM8058_GPIO_S3>;
 						};
 						/* Pin 35 connected to ASET */
-						pinconf_gpio35 {
+						gpio35-pins {
 							pins = "gpio35";
 							function = "normal";
 							output-high;
@@ -346,7 +346,7 @@  pinconf_gpio35 {
 							power-source = <PM8058_GPIO_S3>;
 						};
 					};
-					dragon_veth_gpios: veth-gpios {
+					dragon_veth_gpios: veth-state {
 						pinconf {
 							pins = "gpio40";
 							function = "normal";
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index e068a8d0adf0..7e57a0750320 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -196,8 +196,8 @@  v3p3_fixed: v3p3 {
 		qcom,ssbi@500000 {
 			pmic@0 {
 				gpio@150 {
-					wlan_default_gpios: wlan-gpios {
-						pios {
+					wlan_default_gpios: wlan-gpios-state {
+						pinconf {
 							pins = "gpio43";
 							function = "normal";
 							bias-disable;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2638b380be20..77e841243646 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -291,8 +291,8 @@  pci@1b500000 {
 		qcom,ssbi@500000 {
 			pmic@0 {
 				gpio@150 {
-					wlan_default_gpios: wlan-gpios {
-						pios {
+					wlan_default_gpios: wlan-gpios-state {
+						pinconf {
 							pins = "gpio43";
 							function = "normal";
 							bias-disable;
@@ -300,8 +300,8 @@  pios {
 						};
 					};
 
-					notify_led: nled {
-						pios {
+					notify_led: nled-state {
+						pinconf {
 							pins = "gpio18";
 							function = "normal";
 							bias-disable;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 0cee62c7b8b0..3cf79cc5b539 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -334,7 +334,7 @@  ncp {
 		qcom,ssbi@500000 {
 			pmic@0 {
 				gpio@150 {
-					gpio_keys_pin_a: gpio-keys-pin-active {
+					gpio_keys_pin_a: gpio-keys-active-state {
 						pins = "gpio3", "gpio4", "gpio29", "gpio35";
 						function = "normal";
 
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 10ad929759ed..49de1821ac3a 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -114,7 +114,7 @@  pins {
 };
 
 &pmicgpio {
-	usb_vbus_5v_pins: usb_vbus_5v_pins {
+	usb_vbus_5v_pins: usb-vbus-5v-state {
 		pins = "gpio4";
 		function = "normal";
 		output-high;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 9493886a5c0d..4d8fc8689d24 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -272,7 +272,7 @@  phy@a {
 };
 
 &pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active {
+	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3";
 		function = "normal";
 
@@ -280,7 +280,7 @@  gpio_keys_pin_a: gpio-keys-active {
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	fuelgauge_pin: fuelgauge-int {
+	fuelgauge_pin: fuelgauge-int-state {
 		pins = "gpio9";
 		function = "normal";
 
@@ -289,7 +289,7 @@  fuelgauge_pin: fuelgauge-int {
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	wlan_sleep_clk_pin: wl-sleep-clk {
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
 		pins = "gpio16";
 		function = "func2";
 
@@ -297,7 +297,7 @@  wlan_sleep_clk_pin: wl-sleep-clk {
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	wlan_regulator_pin: wl-reg-active {
+	wlan_regulator_pin: wl-reg-active-state {
 		pins = "gpio17";
 		function = "normal";
 
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index 1d21de46f85c..a4fec2d0d158 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -163,7 +163,7 @@  &pm8941_coincell {
 };
 
 &pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active {
+	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3", "gpio4", "gpio5";
 		function = "normal";
 
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
index 26fc2002e5c3..7bfea4a96896 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -95,7 +95,7 @@  phy@a {
 };
 
 &pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active {
+	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio1", "gpio2", "gpio5";
 		function = "normal";
 
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index d6b2300a8223..90f7a399f40b 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -398,7 +398,7 @@  phy@a {
 };
 
 &pma8084_gpios {
-	gpio_keys_pin_a: gpio-keys-active {
+	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio3", "gpio5";
 		function = "normal";
 
@@ -406,7 +406,7 @@  gpio_keys_pin_a: gpio-keys-active {
 		power-source = <PMA8084_GPIO_S4>;
 	};
 
-	touchkey_pin: touchkey-int-pin {
+	touchkey_pin: touchkey-int-state {
 		pins = "gpio6";
 		function = "normal";
 		bias-disable;
@@ -414,7 +414,7 @@  touchkey_pin: touchkey-int-pin {
 		power-source = <PMA8084_GPIO_S4>;
 	};
 
-	touch_pin: touchscreen-int-pin {
+	touch_pin: touchscreen-int-state {
 		pins = "gpio8";
 		function = "normal";
 		bias-disable;
@@ -422,7 +422,7 @@  touch_pin: touchscreen-int-pin {
 		power-source = <PMA8084_GPIO_S4>;
 	};
 
-	panel_en_pin: panel-en-pin {
+	panel_en_pin: panel-en-state {
 		pins = "gpio14";
 		function = "normal";
 		bias-pull-up;
@@ -430,7 +430,7 @@  panel_en_pin: panel-en-pin {
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 	};
 
-	wlan_sleep_clk_pin: wlan-sleep-clk-pin {
+	wlan_sleep_clk_pin: wlan-sleep-clk-state {
 		pins = "gpio16";
 		function = "func2";
 
@@ -439,7 +439,7 @@  wlan_sleep_clk_pin: wlan-sleep-clk-pin {
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
 	};
 
-	panel_rst_pin: panel-rst-pin {
+	panel_rst_pin: panel-rst-state {
 		pins = "gpio17";
 		function = "normal";
 		bias-disable;
@@ -447,7 +447,7 @@  panel_rst_pin: panel-rst-pin {
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 	};
 
-	fuelgauge_pin: fuelgauge-int-pin {
+	fuelgauge_pin: fuelgauge-int-state {
 		pins = "gpio21";
 		function = "normal";
 		bias-disable;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 9bd8faea61a5..e9bcd3b4ebb3 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -244,7 +244,7 @@  &pm8941_coincell {
 };
 
 &pm8941_gpios {
-	gpio_keys_pin_a: gpio-keys-active {
+	gpio_keys_pin_a: gpio-keys-active-state {
 		pins = "gpio2", "gpio5";
 		function = "normal";
 
@@ -252,7 +252,7 @@  gpio_keys_pin_a: gpio-keys-active {
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	bt_reg_on_pin: bt-reg-on {
+	bt_reg_on_pin: bt-reg-on-state {
 		pins = "gpio16";
 		function = "normal";
 
@@ -260,7 +260,7 @@  bt_reg_on_pin: bt-reg-on {
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	wlan_sleep_clk_pin: wl-sleep-clk {
+	wlan_sleep_clk_pin: wl-sleep-clk-state {
 		pins = "gpio17";
 		function = "func2";
 
@@ -268,7 +268,7 @@  wlan_sleep_clk_pin: wl-sleep-clk {
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	wlan_regulator_pin: wl-reg-active {
+	wlan_regulator_pin: wl-reg-active-state {
 		pins = "gpio18";
 		function = "normal";
 
@@ -276,7 +276,7 @@  wlan_regulator_pin: wl-reg-active {
 		power-source = <PM8941_GPIO_S3>;
 	};
 
-	lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
+	lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
 		pins = "gpio20";
 		function = "normal";
 
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index cdd2bdb77b32..a68634397938 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -68,7 +68,7 @@  pm8941_gpios: gpios@c000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			boost_bypass_n_pin: boost-bypass {
+			boost_bypass_n_pin: boost-bypass-state {
 				pins = "gpio21";
 				function = "normal";
 			};