@@ -124,12 +124,22 @@ properties:
- const: ipa-clock-enabled-valid
- const: ipa-clock-enabled
+ qcom,gsi-loader:
+ enum:
+ - self
+ - modem
+ description:
+ This indicates how GSI firmware should be loaded. If the AP loads
+ and validates GSI firmware, this property has value "self". If the
+ modem does this, this property has value "modem".
+
modem-init:
+ deprecated: true
type: boolean
description:
- If present, it indicates that the modem is responsible for
- performing early IPA initialization, including loading and
- validating firwmare used by the GSI.
+ This is the older (deprecated) way of indicating how GSI firmware
+ should be loaded. If present, the modem loads GSI firmware; if
+ absent, the AP loads GSI firmware.
memory-region:
maxItems: 1
@@ -155,15 +165,36 @@ required:
- interconnects
- qcom,smem-states
-# If modem-init is not present, the AP loads GSI firmware, and
-# memory-region must be specified
-if:
- not:
- required:
- - modem-init
-then:
- required:
- - memory-region
+allOf:
+ # If qcom,gsi-loader is present, modem-init must not be present
+ - if:
+ required:
+ - qcom,gsi-loader
+ then:
+ properties:
+ modem-init: false
+
+ # If qcom,gsi-loader is "self", the AP loads GSI firmware, and
+ # memory-region must be specified
+ if:
+ properties:
+ qcom,gsi-loader:
+ contains:
+ const: self
+ then:
+ required:
+ - memory-region
+ else:
+ # If qcom,gsi-loader is not present, we use deprecated behavior.
+ # If modem-init is not present, the AP loads GSI firmware, and
+ # memory-region must be specified.
+ if:
+ not:
+ required:
+ - modem-init
+ then:
+ required:
+ - memory-region
additionalProperties: false
@@ -196,7 +227,9 @@ examples:
ipa@1e40000 {
compatible = "qcom,sdm845-ipa";
- modem-init;
+ qcom,gsi-loader = "self";
+ memory-region = <&ipa_fw_mem>;
+ firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn";
iommus = <&apps_smmu 0x720 0x3>;
reg = <0x1e40000 0x7000>,
GSI firmware for IPA must be loaded during initialization, either by the AP or by the modem. The loader is currently specified based on whether the Boolean modem-init property is present. Instead, use a new property with an enumerated value to indicate explicitly how GSI firmware gets loaded. With this in place, a third approach can be added in an upcoming patch. The new qcom,gsi-loader property has two defined values: - self: The AP loads GSI firmware - modem: The modem loads GSI firmware The modem-init property must still be supported, but is now marked deprecated. Signed-off-by: Alex Elder <elder@linaro.org> --- .../devicetree/bindings/net/qcom,ipa.yaml | 59 +++++++++++++++---- 1 file changed, 46 insertions(+), 13 deletions(-)