From patchwork Thu Dec 29 13:31:59 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luca Ceresoli X-Patchwork-Id: 638072 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D9038C3DA7A for ; Thu, 29 Dec 2022 13:33:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233571AbiL2Ndp (ORCPT ); Thu, 29 Dec 2022 08:33:45 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52526 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233520AbiL2NdU (ORCPT ); Thu, 29 Dec 2022 08:33:20 -0500 Received: from relay9-d.mail.gandi.net (relay9-d.mail.gandi.net [217.70.183.199]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A125D11C34; Thu, 29 Dec 2022 05:32:56 -0800 (PST) Received: from booty.fritz.box (unknown [77.244.183.192]) (Authenticated sender: luca.ceresoli@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 268C2FF806; Thu, 29 Dec 2022 13:32:53 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1672320775; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=lGBa+7o6/9r9LqBwEry5jOCjAKB2CmT7ylXiBMEZX0s=; b=WCQCJSFg7uXKHV952mRhiEezldySXmzAmtF1wtF7tD3QDUGfeaN8hHsmv5Vlni0905HtuB MLW1NXy1XRhZbjM9TA1zK3yaH4eC38/9IDIa7xkNYjbhPo2KBFhwZ7FdciYmW6+nO41p8M QHCe4NzwYcSG++2SIGe/EfUpK4Qr8LTb9/IR25yJrq5DvdALP8x5skPFdkl7AUbOsb++nZ mSSkdmJH0RCJPaIZqGLqOQLg5DvsV+a7HLqFyqjfrijHZPF2e+tJLC7yQwu/+H3zSBMLhT 7UjdFVHjX2Pg/IvY49UYKR6C/RSaJk3q92qv9tcEyr4hcTDPJVmP+PH1eF/jxw== From: Luca Ceresoli To: Thierry Reding , Jonathan Hunter , Sowjanya Komatineni , Luca Ceresoli , David Airlie , Daniel Vetter , Rob Herring , Krzysztof Kozlowski , Mauro Carvalho Chehab , Greg Kroah-Hartman , Dmitry Osipenko , Hans Verkuil Cc: linux-media@vger.kernel.org, linux-tegra@vger.kernel.org, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev, Thomas Petazzoni , Paul Kocialkowski , Richard Leitner Subject: [PATCH v3 15/21] staging: media: tegra-video: move MIPI calibration calls from VI to CSI Date: Thu, 29 Dec 2022 14:31:59 +0100 Message-Id: <20221229133205.981397-16-luca.ceresoli@bootlin.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20221229133205.981397-1-luca.ceresoli@bootlin.com> References: <20221229133205.981397-1-luca.ceresoli@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The CSI module does not handle all the MIPI lane calibration procedure, leaving a small part of it to the VI module. In doing this, tegra_channel_enable_stream() (vi.c) manipulates the private data of the upstream subdev casting it to struct 'tegra_csi_channel', which will be wrong after introducing a VIP (parallel video input) channel. This prevents adding support for the VIP module. It also breaks the logical isolation between modules. Since the lane calibration requirement does not exist in the parallel input module, moving the calibration function to a per-module op is not optimal. Instead move the calibration procedure in the CSI module, together with the rest of the calibration procedures. After this change, tegra_channel_enable_stream() just calls v4l2_subdev_call() to ask for a stream start/stop to the CSI module, which in turn knows all the CSI-specific details to implement it. Signed-off-by: Luca Ceresoli --- No changes in v3 No changes in v2 --- drivers/staging/media/tegra-video/csi.c | 44 ++++++++++++++++++++ drivers/staging/media/tegra-video/vi.c | 54 ++----------------------- 2 files changed, 48 insertions(+), 50 deletions(-) diff --git a/drivers/staging/media/tegra-video/csi.c b/drivers/staging/media/tegra-video/csi.c index 9a03d5ccdf3c..b93fc879ef3a 100644 --- a/drivers/staging/media/tegra-video/csi.c +++ b/drivers/staging/media/tegra-video/csi.c @@ -328,12 +328,42 @@ static int tegra_csi_enable_stream(struct v4l2_subdev *subdev) } csi_chan->pg_mode = chan->pg_mode; + + /* + * Tegra CSI receiver can detect the first LP to HS transition. + * So, start the CSI stream-on prior to sensor stream-on and + * vice-versa for stream-off. + */ ret = csi->ops->csi_start_streaming(csi_chan); if (ret < 0) goto finish_calibration; + if (csi_chan->mipi) { + struct v4l2_subdev *src_subdev; + /* + * TRM has incorrectly documented to wait for done status from + * calibration logic after CSI interface power on. + * As per the design, calibration results are latched and applied + * to the pads only when the link is in LP11 state which will happen + * during the sensor stream-on. + * CSI subdev stream-on triggers start of MIPI pads calibration. + * Wait for calibration to finish here after sensor subdev stream-on. + */ + src_subdev = tegra_channel_get_remote_source_subdev(chan); + ret = v4l2_subdev_call(src_subdev, video, s_stream, true); + err = tegra_mipi_finish_calibration(csi_chan->mipi); + + if (ret < 0 && ret != -ENOIOCTLCMD) + goto disable_csi_stream; + + if (err < 0) + dev_warn(csi->dev, "MIPI calibration failed: %d\n", err); + } + return 0; +disable_csi_stream: + csi->ops->csi_stop_streaming(csi_chan); finish_calibration: if (csi_chan->mipi) tegra_mipi_finish_calibration(csi_chan->mipi); @@ -352,10 +382,24 @@ static int tegra_csi_enable_stream(struct v4l2_subdev *subdev) static int tegra_csi_disable_stream(struct v4l2_subdev *subdev) { + struct tegra_vi_channel *chan = v4l2_get_subdev_hostdata(subdev); struct tegra_csi_channel *csi_chan = to_csi_chan(subdev); struct tegra_csi *csi = csi_chan->csi; int err; + /* + * Stream-off subdevices in reverse order to stream-on. + * Remote source subdev in TPG mode is same as CSI subdev. + */ + if (csi_chan->mipi) { + struct v4l2_subdev *src_subdev; + + src_subdev = tegra_channel_get_remote_source_subdev(chan); + err = v4l2_subdev_call(src_subdev, video, s_stream, false); + if (err < 0 && err != -ENOIOCTLCMD) + dev_err_probe(csi->dev, err, "source subdev stream off failed\n"); + } + csi->ops->csi_stop_streaming(csi_chan); if (csi_chan->mipi) { diff --git a/drivers/staging/media/tegra-video/vi.c b/drivers/staging/media/tegra-video/vi.c index 3762fd273514..a26eb1ca869f 100644 --- a/drivers/staging/media/tegra-video/vi.c +++ b/drivers/staging/media/tegra-video/vi.c @@ -187,49 +187,15 @@ tegra_channel_get_remote_source_subdev(struct tegra_vi_channel *chan) static int tegra_channel_enable_stream(struct tegra_vi_channel *chan) { - struct v4l2_subdev *csi_subdev, *src_subdev; - struct tegra_csi_channel *csi_chan; - int ret, err; + struct v4l2_subdev *subdev; + int ret; - /* - * Tegra CSI receiver can detect the first LP to HS transition. - * So, start the CSI stream-on prior to sensor stream-on and - * vice-versa for stream-off. - */ - csi_subdev = tegra_channel_get_remote_csi_subdev(chan); - ret = v4l2_subdev_call(csi_subdev, video, s_stream, true); + subdev = tegra_channel_get_remote_csi_subdev(chan); + ret = v4l2_subdev_call(subdev, video, s_stream, true); if (ret < 0 && ret != -ENOIOCTLCMD) return ret; - if (IS_ENABLED(CONFIG_VIDEO_TEGRA_TPG)) - return 0; - - csi_chan = v4l2_get_subdevdata(csi_subdev); - /* - * TRM has incorrectly documented to wait for done status from - * calibration logic after CSI interface power on. - * As per the design, calibration results are latched and applied - * to the pads only when the link is in LP11 state which will happen - * during the sensor stream-on. - * CSI subdev stream-on triggers start of MIPI pads calibration. - * Wait for calibration to finish here after sensor subdev stream-on. - */ - src_subdev = tegra_channel_get_remote_source_subdev(chan); - ret = v4l2_subdev_call(src_subdev, video, s_stream, true); - err = tegra_mipi_finish_calibration(csi_chan->mipi); - - if (ret < 0 && ret != -ENOIOCTLCMD) - goto err_disable_csi_stream; - - if (err < 0) - dev_warn(csi_chan->csi->dev, - "MIPI calibration failed: %d\n", err); - return 0; - -err_disable_csi_stream: - v4l2_subdev_call(csi_subdev, video, s_stream, false); - return ret; } static int tegra_channel_disable_stream(struct tegra_vi_channel *chan) @@ -237,18 +203,6 @@ static int tegra_channel_disable_stream(struct tegra_vi_channel *chan) struct v4l2_subdev *subdev; int ret; - /* - * Stream-off subdevices in reverse order to stream-on. - * Remote source subdev in TPG mode is same as CSI subdev. - */ - subdev = tegra_channel_get_remote_source_subdev(chan); - ret = v4l2_subdev_call(subdev, video, s_stream, false); - if (ret < 0 && ret != -ENOIOCTLCMD) - return ret; - - if (IS_ENABLED(CONFIG_VIDEO_TEGRA_TPG)) - return 0; - subdev = tegra_channel_get_remote_csi_subdev(chan); ret = v4l2_subdev_call(subdev, video, s_stream, false); if (ret < 0 && ret != -ENOIOCTLCMD)