| Message ID | 20230131151819.16612-1-ansuelsmth@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v5,1/3] dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables | expand |
On Wed, Feb 01, 2023 at 09:19:42AM +0100, Krzysztof Kozlowski wrote: > On 31/01/2023 16:18, Christian Marangi wrote: > > Add additional info on what opp tables the defined devices in this schema > > supports (operating-points-v2-kryo-cpu and operating-points-v2-qcom-level) > > and reference them. > > > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > --- > > Changes v5: > > - Swap patch 1 and patch 2 to fix dt_check_warning on single > > patch bisecting > > Changes v4: > > - Add patch split from patch 1 > > > > .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 35 ++++++++++++++----- > > This patch causes new warnings: > > arch/arm64/boot/dts/qcom/apq8096-ifc6640.dtb: /: opp-table-cluster0: > Unevaluated properties are not allowed ('compatible', 'nvmem-cells', > 'opp-1036800000', 'opp-1113600000', 'opp-1190400000', 'opp-1228800000', > 'opp-1324800000', 'opp-1363200000', 'opp-1401600000', 'opp-1478400000', > 'opp-1497600000', 'opp-1593600000', 'opp-307200000', 'opp-422400000', > 'opp-480000000', 'opp-556800000', 'opp-652800000', 'opp-729600000', > 'opp-844800000', 'opp-960000000', 'opp-shared' were unexpected) > Hi, this is fixed by the third patch and caused by opp-supported-hw:0:0: 16 is greater than the maximum of 7 that is fixed by documenting the new bits.
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml index 9c086eac6ca7..7c42d9439abd 100644 --- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml +++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml @@ -55,15 +55,32 @@ properties: patternProperties: '^opp-table(-[a-z0-9]+)?$': - if: - properties: - compatible: - const: operating-points-v2-kryo-cpu - then: - patternProperties: - '^opp-?[0-9]+$': - required: - - required-opps + allOf: + - if: + properties: + compatible: + const: operating-points-v2-kryo-cpu + then: + $ref: /schemas/opp/opp-v2-kryo-cpu.yaml# + + - if: + properties: + compatible: + const: operating-points-v2-kryo-cpu + then: + patternProperties: + '^opp-?[0-9]+$': + required: + - required-opps + + - if: + properties: + compatible: + const: operating-points-v2-qcom-level + then: + $ref: /schemas/opp/opp-v2-qcom-level.yaml# + + unevaluatedProperties: false additionalProperties: true
Add additional info on what opp tables the defined devices in this schema supports (operating-points-v2-kryo-cpu and operating-points-v2-qcom-level) and reference them. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v5: - Swap patch 1 and patch 2 to fix dt_check_warning on single patch bisecting Changes v4: - Add patch split from patch 1 .../bindings/cpufreq/qcom-cpufreq-nvmem.yaml | 35 ++++++++++++++----- 1 file changed, 26 insertions(+), 9 deletions(-)