diff mbox series

[v2,10/22] arm64: dts: qcom: pmk8350: use interrupts-extended for IRQ specification

Message ID 20230401220810.3563708-11-dmitry.baryshkov@linaro.org
State New
Headers show
Series arm64: dts: qcom: remove duplication in PMIC declarations | expand

Commit Message

Dmitry Baryshkov April 1, 2023, 10:07 p.m. UTC 
As stated in the commit 2d5cab9232ba ("arm64: dts: qcom: sc8280xp-pmics:
Specify interrupt parent explicitly"), we should not use bare interrupts
for our PMIC devices. Instead interrupts-extended should be used. Change
pmk8350.dtsi to use interrupts-extended propery.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index f26ff3daf119..87b8e4269c60 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -33,14 +33,14 @@  LABEL(pon): pon@1300 {
 
 			LABEL(pon_pwrkey): pwrkey {
 				compatible = "qcom,pmk8350-pwrkey";
-				interrupts = <PMIC_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				interrupts-extended = <&spmi_bus PMIC_SID 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
 				linux,code = <KEY_POWER>;
 				status = "disabled";
 			};
 
 			LABEL(pon_resin): resin {
 				compatible = "qcom,pmk8350-resin";
-				interrupts = <PMIC_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				interrupts-extended = <&spmi_bus PMIC_SID 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
 				status = "disabled";
 			};
 		};
@@ -50,14 +50,14 @@  LABEL(vadc): adc@3100 {
 			reg = <0x3100>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <PMIC_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus PMIC_SID 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 			#io-channel-cells = <1>;
 		};
 
 		LABEL(adc_tm): adc-tm@3400 {
 			compatible = "qcom,adc-tm7";
 			reg = <0x3400>;
-			interrupts = <PMIC_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus PMIC_SID 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#thermal-sensor-cells = <1>;
@@ -68,7 +68,7 @@  LABEL(rtc): rtc@6100 {
 			compatible = "qcom,pmk8350-rtc";
 			reg = <0x6100>, <0x6200>;
 			reg-names = "rtc", "alarm";
-			interrupts = <PMIC_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupts-extended = <&spmi_bus PMIC_SID 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
 			status = "disabled";
 		};