From patchwork Wed Apr 5 15:50:32 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Konrad Dybcio X-Patchwork-Id: 670571 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 851B6C7619A for ; Wed, 5 Apr 2023 15:51:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239184AbjDEPvb (ORCPT ); Wed, 5 Apr 2023 11:51:31 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:37754 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239124AbjDEPvK (ORCPT ); Wed, 5 Apr 2023 11:51:10 -0400 Received: from mail-lf1-x135.google.com (mail-lf1-x135.google.com [IPv6:2a00:1450:4864:20::135]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8762619B4 for ; Wed, 5 Apr 2023 08:51:01 -0700 (PDT) Received: by mail-lf1-x135.google.com with SMTP id y15so47236207lfa.7 for ; Wed, 05 Apr 2023 08:51:01 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1680709859; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=POQhVek2U67TEE4v90nENW3eLneoDYBmSmHKrlERIJY=; b=vdrMIZDC39lXBMY8gUFOqAiyunQN3M3jasrWo5n8U264bdZoT2hr1w10ydkgdS5rGB wykLtQ8l6BCBefa540mO2vbdHcD0UlNcClAI9kcMO4oY/X3uJ0L1xwBUPuvP4tlN6q8r hx2ncIKQOlnmU/BXy8XWirCs5fH14FAEKnwn/dnqc/Y3YndTad4yI+AloqFk3hIn5Cga xznXMKw8MUobuJ1AJ3Kwm9hgg0UG2D1hgIgO11GKmceRGa0CkCICxcuG8owTP0ABMf4D 8Ny0KxD+P/XVWgVKEHDwnKKjzgayN8GNU4jFMn5uosdbsEaqppjZefo+V2yqKWjyVzcm RkVQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1680709859; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=POQhVek2U67TEE4v90nENW3eLneoDYBmSmHKrlERIJY=; b=ryT7vw0XuyCnoQeV3LnmNKIJU4ndQ+ZeSyaoXSR+8c7DJ30E80i6vLE3ZgRgkQCiYA 9nyvl09jdg5EfMGTmeJ0iT0NgeOFTW9re8gQrWjxy3T6ekKMqxpeAQguhFR5u/oRq6ln PEvpp0MfGPqZ/nlfGE99ft53rYF37JL7u0atTYMUYmzizp9fkdcEPNkaTZZonZgA3j/6 Yby5OpnEKZzvZM0M4HKhAcrBj/LeA32dv5ATiBE0a+sYqyfrQA1EE/ayfzGv5GuQN7Hi PtoL33KsDMqEGwG8E6iLQgh1YzosQApnMMkxrI4RTRUPfft/nNSNxaxz5ekDn/hkfgH1 2Ebw== X-Gm-Message-State: AAQBX9cYTJaPQCsPz/XhAD8A1PgalVadozLK9+6/8hDtkYGYw425kltv vFYAATTrz5oz6WlY6ZCkuH0Sew== X-Google-Smtp-Source: AKy350YQf8FRx3rhwqXiFeV/4xXSGw1EFaKVrhqlaQxvg6Mya/ZU1OBh7kdYat3Y71IXvqcsp92uGg== X-Received: by 2002:ac2:4dab:0:b0:4d5:978e:8bcf with SMTP id h11-20020ac24dab000000b004d5978e8bcfmr1764543lfe.33.1680709859493; Wed, 05 Apr 2023 08:50:59 -0700 (PDT) Received: from [192.168.1.101] (abxh37.neoplus.adsl.tpnet.pl. [83.9.1.37]) by smtp.gmail.com with ESMTPSA id o28-20020ac2495c000000b004eb2db994e7sm2869344lfi.239.2023.04.05.08.50.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 05 Apr 2023 08:50:59 -0700 (PDT) From: Konrad Dybcio Date: Wed, 05 Apr 2023 17:50:32 +0200 Subject: [PATCH v2 3/5] arm64: dts: qcom: Add initial QCM2290 device tree MIME-Version: 1.0 Message-Id: <20230403-topic-rb1_qcm-v2-3-dae06f8830dc@linaro.org> References: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> In-Reply-To: <20230403-topic-rb1_qcm-v2-0-dae06f8830dc@linaro.org> To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Robert Marko , Das Srinagesh Cc: Bhupesh Sharma , Vladimir Zapolskiy , Marijn Suijten , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Konrad Dybcio X-Mailer: b4 0.12.2 X-Developer-Signature: v=1; a=ed25519-sha256; t=1680709854; l=41838; i=konrad.dybcio@linaro.org; s=20230215; h=from:subject:message-id; bh=ZLAR0hfE9dCtsdhH5I7NhN016VxthG+bkgn5vsQ7j0c=; b=nGIb+xcNx1DZ01fp7R20JKTNLe26+v27nGLuKnn/j1tn4TbVOuS8UEEH4I5uEEww9k2DLIRzaFu3 pIFoAdl+CFjYD3Revedtw8oXpP1N9hLXLNJV/zri5kLZGeQh8DSH X-Developer-Key: i=konrad.dybcio@linaro.org; a=ed25519; pk=iclgkYvtl2w05SSXO5EjjSYlhFKsJ+5OSZBjOkQuEms= Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add an initial device tree for the QCM2290 low-end SoC, featuring 4 "customized" Cortex-A53 cores and up to 4 GiB of LPDDR(3/4X). This revision brings support for: - TSENS & thermal zones - SDHCI1/2 - I2C, SPI, UART - MPSS - ADSP - Wi-Fi Signed-off-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 +++++++++++++++++++++++++++++++++ 2 files changed, 1562 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1a29403400b7..6fc8d6664f0c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5-vision-mezzanine.dtb dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi new file mode 100644 index 000000000000..ae5abc76bcc7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -0,0 +1,1561 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + * + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcm2290", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + #reset-cells = <1>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x40000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: sec-apps@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + pil_modem_mem: modem@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: video@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_adsp_mem: adsp@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1c00000>; + no-map; + }; + + pil_ipa_fw_mem: ipa-fw@53600000 { + reg = <0x0 0x53600000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: ipa-gsi@53610000 { + reg = <0x0 0x53610000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: zap@53615000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x53615000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: framebuffer@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: dpfs-data@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: reserved@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-qcm2290"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,qcm2290-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = ; + }; + + rpmpd_opp_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = ; + }; + + rpmpd_opp_nom: opp5 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = ; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = ; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x0 0x00500000 0x0 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 127>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-qcm2290"; + reg = <0x0 0x01400000 0x0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_hsphy: phy@1613000 { + compatible = "qcom,qcm2290-qusb2-phy"; + reg = <0x0 0x01613000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + #phy-cells = <0>; + + status = "disabled"; + }; + + qfprom@1b44000 { + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; + reg = <0x0 0x01b44000 0x0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupts = ; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4411000 { + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; + reg = <0x0 0x04411000 0x0 0x1ff>, + <0x0 0x04410000 0x0 0x8>; + #qcom,sensors = <10>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + rng: rng@4453000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x04453000 0x0 0x1000>; + clocks = <&rpmcc RPM_SMD_HWKM_CLK>; + clock-names = "core"; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x0 0x045f0000 0x0 0x7000>; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x0 0x04690000 0x0 0x10000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; + reg-names = "hc", + "cqhci", + "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", + "core", + "xo", + "ice"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + iommus = <&apps_smmu 0xc0 0x0>; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <8>; + + status = "disabled"; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04784000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC2_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0xa0 0x0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x04a00000 0x0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@4a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + usb: usb@4ef8800 { + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; + reg = <0x0 0x04ef8800 0x0 0x400>; + interrupts = , + ; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x04e00000 0x0 0xcd00>; + interrupts = ; + phys = <&usb_hsphy>; + phy-names = "usb2-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, + <&rpmpd QCM2290_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x0c600000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x0 0x0c800000 0x0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x1a0 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + watchdog@f017000 { + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + interrupts = , + ; + clocks = <&sleep_clk>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,qcm2290-apcs-hmss-global"; + reg = <0x0 0x0f111000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0f121000 0x8000>; + + frame@0 { + reg = <0x0 0x1000>, + <0x1000 0x1000>; + interrupts = , + ; + frame-number = <0>; + }; + + frame@2000 { + reg = <0x2000 0x1000>; + interrupts = ; + frame-number = <1>; + status = "disabled"; + }; + + frame@3000 { + reg = <0x3000 0x1000>; + interrupts = ; + frame-number = <2>; + status = "disabled"; + }; + + frame@4000 { + reg = <0x4000 0x1000>; + interrupts = ; + frame-number = <3>; + status = "disabled"; + }; + + frame@5000 { + reg = <0x5000 0x1000>; + interrupts = ; + frame-number = <4>; + status = "disabled"; + }; + + frame@6000 { + reg = <0x6000 0x1000>; + interrupts = ; + frame-number = <5>; + status = "disabled"; + }; + + frame@7000 { + reg = <0x7000 0x1000>; + interrupts = ; + frame-number = <6>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + cpufreq_hw: cpufreq@f521000 { + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0x0 0x0f521000 0x0 0x1000>; + reg-names = "freq-domain0"; + interrupts = ; + interrupt-names = "dcvsh-irq-0"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + thermal-zones { + mapss-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + mapss_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_crit: wlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + mdm0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_crit: mdm0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + mdm1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_crit: mdm1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + hm-center-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + hm_center_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_crit: hm-center-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +};