diff mbox series

[v3,1/2] gpio: Rewrite IXP4xx GPIO bindings in schema

Message ID 20230923-ixp4xx-gpio-clocks-v3-1-66f8fe4e7f15@linaro.org
State Accepted
Commit ff2cbd758d5c1ad9c1782100c3ea9721811f95b2
Headers show
Series gpio: ixp4xx: Handle external clock output | expand

Commit Message

Linus Walleij Sept. 23, 2023, 4:02 p.m. UTC 
This rewrites the IXP4xx GPIO bindings to use YAML schema,
and adds two new properties to enable fixed clock output on
pins 14 and 15.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 .../devicetree/bindings/gpio/intel,ixp4xx-gpio.txt | 38 -----------
 .../bindings/gpio/intel,ixp4xx-gpio.yaml           | 73 ++++++++++++++++++++++
 MAINTAINERS                                        |  2 +-
 3 files changed, 74 insertions(+), 39 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
deleted file mode 100644
index 8dc41ed99685..000000000000
--- a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@ 
-Intel IXP4xx XScale Networking Processors GPIO
-
-This GPIO controller is found in the Intel IXP4xx processors.
-It supports 16 GPIO lines.
-
-The interrupt portions of the GPIO controller is hierarchical:
-the synchronous edge detector is part of the GPIO block, but the
-actual enabling/disabling of the interrupt line is done in the
-main IXP4xx interrupt controller which has a 1:1 mapping for
-the first 12 GPIO lines to 12 system interrupts.
-
-The remaining 4 GPIO lines can not be used for receiving
-interrupts.
-
-The interrupt parent of this GPIO controller must be the
-IXP4xx interrupt controller.
-
-Required properties:
-
-- compatible : Should be
-  "intel,ixp4xx-gpio"
-- reg : Should contain registers location and length
-- gpio-controller : marks this as a GPIO controller
-- #gpio-cells : Should be 2, see gpio/gpio.txt
-- interrupt-controller : marks this as an interrupt controller
-- #interrupt-cells : a standard two-cell interrupt, see
-  interrupt-controller/interrupts.txt
-
-Example:
-
-gpio0: gpio@c8004000 {
-	compatible = "intel,ixp4xx-gpio";
-	reg = <0xc8004000 0x1000>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
new file mode 100644
index 000000000000..bfcb1f364c3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
@@ -0,0 +1,73 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/intel,ixp4xx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx XScale Networking Processors GPIO Controller
+
+description: |
+  This GPIO controller is found in the Intel IXP4xx
+  processors. It supports 16 GPIO lines.
+  The interrupt portions of the GPIO controller is hierarchical.
+  The synchronous edge detector is part of the GPIO block, but the
+  actual enabling/disabling of the interrupt line is done in the
+  main IXP4xx interrupt controller which has a 1-to-1 mapping for
+  the first 12 GPIO lines to 12 system interrupts.
+  The remaining 4 GPIO lines can not be used for receiving
+  interrupts.
+  The interrupt parent of this GPIO controller must be the
+  IXP4xx interrupt controller.
+  GPIO 14 and 15 can be used as clock outputs rather than GPIO,
+  and this can be enabled by a special flag.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: intel,ixp4xx-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  intel,ixp4xx-gpio14-clkout:
+    description: If defined, enables clock output on GPIO 14
+      instead of GPIO.
+    type: boolean
+
+  intel,ixp4xx-gpio15-clkout:
+    description: If defined, enables clock output on GPIO 15
+      instead of GPIO.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio@c8004000 {
+        compatible = "intel,ixp4xx-gpio";
+        reg = <0xc8004000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 90f13281d297..4e216887eb76 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2215,7 +2215,7 @@  M:	Krzysztof Halasa <khalasa@piap.pl>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
-F:	Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
+F:	Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
 F:	Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion*
 F:	Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml