From patchwork Mon Nov 6 08:39:13 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 742079 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3D63D33CF for ; Mon, 6 Nov 2023 08:39:28 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="ycophzC3" Received: from mail-lj1-x22c.google.com (mail-lj1-x22c.google.com [IPv6:2a00:1450:4864:20::22c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AB41BE1 for ; Mon, 6 Nov 2023 00:39:24 -0800 (PST) Received: by mail-lj1-x22c.google.com with SMTP id 38308e7fff4ca-2c6b48cb2b6so59131451fa.2 for ; Mon, 06 Nov 2023 00:39:24 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1699259963; x=1699864763; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=T1L0IGLHrMSmbmxwho19YEnFKRvMRWS83xENNk7/0Co=; b=ycophzC3zKEx8TQ3LKSGM3pyO66ZBlQGXKp3NDE6BlMhVfAI6eHWCgO0Q+RXrSqkDX GDjc+1v09+sIUYRfyaFIr1a0bY8rRFzM0lSG27MNqw5aeWyp8pHktB+iLHRumNhDGTOu HN9mXPgitJyYlYAmjAGvjar6FvfQfaUAWRaLf3PhZu0CozLT4tonXVnVcYrhIY935TfX CVTF+uLimobYviE7XP6hUitMZJoCP3kZWTNcF/N3fTtdwIIQUMMumfoUOCCJBwxphC6c HgramM/djYsWy9kRZsvPdmlRJc0JuxRCUDdTCCJchsSFqIZ4+tXoOZ8Pcfah7yNPJ3H+ s5FQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1699259963; x=1699864763; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=T1L0IGLHrMSmbmxwho19YEnFKRvMRWS83xENNk7/0Co=; b=VbKhNMO/AIPwkNpDTulHpJ+0R2+xXPj7AmRh3rPmbWZyxWIkq5j4+L2G7Uh9+lHcBo ypPApfophXbj2Dd3lnjzib2xz+znT8l7TQjwoaAA8iIcfpl2VJhMHnxy/rU3oizslNiz rxdaVV2CBI8BxMpimtCBIgTx2uMXUl8nPiM5QC2HUqGgLUcgpwBSUySENQzz3JBeNC1c enGvLaQRA5uhODRRBQpNo0tdL+eoF0PSwxe5a+kmFRv+CA6oFU24D2vX9bmFCwbQ8ygb SEulxDTpNr+QLbCNyKF6PQuSF1iMbdzHRcoSONaoE0P34v6GLoRv1vssjKA0oyTcaqEG n87Q== X-Gm-Message-State: AOJu0Yyq3bNKP/+ismVzYgO1BsDAiQ16Myta89WMH4F9/l4uK3Yeu2UU 8wjMpl5ULQEepfPwywHSsbuvhA== X-Google-Smtp-Source: AGHT+IHuk5ca0srAA6YM+1qu3ZqSQ3MUO6IvZib1KN0+bqbkSdDZOlyi7z+S9j14nL8uyzA31MWgUQ== X-Received: by 2002:a05:6512:3f0b:b0:507:c507:c9b6 with SMTP id y11-20020a0565123f0b00b00507c507c9b6mr26815310lfa.41.1699259962884; Mon, 06 Nov 2023 00:39:22 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id t5-20020adfe445000000b00323293bd023sm8829830wrm.6.2023.11.06.00.39.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 06 Nov 2023 00:39:22 -0800 (PST) From: Neil Armstrong Date: Mon, 06 Nov 2023 09:39:13 +0100 Subject: [PATCH v2 5/8] arm64: dts: qcom: sm8650: add initial SM8650 QRD dts Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231106-topic-sm8650-upstream-dt-v2-5-44d6f9710fa7@linaro.org> References: <20231106-topic-sm8650-upstream-dt-v2-0-44d6f9710fa7@linaro.org> In-Reply-To: <20231106-topic-sm8650-upstream-dt-v2-0-44d6f9710fa7@linaro.org> To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=15126; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=BJX3H7T6r5zyOk3dKr4bs1phC85sc0l1Kxgbkl+sH+Y=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBlSKYzfMhXUrKeMlKQikvWPAoPCaky0aVD7DAvKpMk Ibwrq/+JAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZUimMwAKCRB33NvayMhJ0cP3D/ 9HUBFMQhD9hFPc5TNi3ZeKtp5a6+93X0nZa5/RBAQjBNeRXY1GHMkRWzmgRDzkiWsPPFJ5z6Cdw1/e tJkGgKC/uS6tytXDHH6FibQgyu7y/RSMqHU5J6fHanuVjnGg6kLs3KkaFAbcE/G0T4G9cFj6nB5q3c kGROCgrN1G3fdRgonsjSfTcaBwzLfzmnZxVQxIpiTxeAhFIdUW+0AMM1g4oU4eaJTz9rvgOdt1p3Hf WAKrpvAy8n+0Zi2U8Y7iCzXuByGQCnMODN/Ddl4QqMXbTDnE2XI2UAnUirrVXyJD6qiLCV681y8aCh vrxYm7WBw3OgLrmAq1aN0bI+Ja9PqVw/DjiV/6S3+muQzOohHqdqrlPgvY10jOzWDjAJ6/qXruTJCJ IeWxjJdJgt7F8NW+J84JXuVf1pQTn15/PNaP0+p5qjx0XvGVEKDj3d047fNa/TUfmgaoxY4iXbYUT3 xJct0kNNTzIH+obz+GpJzSp2A1Tvumy+hvWNY4hTGj+8o7XUE/WXPFowMnjI3CJs+P+JLg2QIidBr/ 1aRTZpUdmVtHhKpfn9CwCxxAfSZiumX7mhwsdSuPFE1J3F/O2yDAd3cOi3lX5RGbb570foXfdNO8yf L26rujqVlkoN8qRwGx4+gw0PF81IDY8igGZBNabF0j+21SBN17dS7M/1AHwA== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Add initial QRD (Qualcomm Reference Device) DT, it supports boot to shell with buttons, leds and USB peripheral. Reviewed-by: Konrad Dybcio Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8650-qrd.dts | 530 ++++++++++++++++++++++++++++++++ 2 files changed, 531 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d73fd2332a34..821bacf3ddb5 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -232,3 +232,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts new file mode 100644 index 000000000000..f5ce4c889680 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -0,0 +1,530 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include +#include +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 QRD"; + compatible = "qcom,sm8650-qrd", "qcom,sm8650"; + + aliases { + serial0 = &uart15; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = ; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = ; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = ; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = ; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = ; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = ; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = ; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = ; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + power-source = <1>; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + + led@3 { + reg = <3>; + color = ; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pmk8550_rtc { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + gpio-reserved-ranges = <32 8>; +}; + +&uart15 { + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C + * USB SS -> NB7VPQ904MMUTWG -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +};