diff mbox series

[v12,4/4] thermal: thermal_of: Allow rebooting after critical temp

Message ID 20231129124330.519423-4-festevam@gmail.com
State New
Headers show
Series None | expand

Commit Message

Fabio Estevam Nov. 29, 2023, 12:43 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

Currently, the default mechanism is to trigger a shutdown after the
critical temperature is reached.

In some embedded cases, such behavior does not suit well, as the board may
be unattended in the field and rebooting may be a better approach.

The bootloader may also check the temperature and only allow the boot to
proceed when the temperature is below a certain threshold.

Introduce support for allowing a reboot to be triggered after the
critical temperature is reached.

If the "critical-action" devicetree property is not found, fall back to
the shutdown action to preserve the existing default behavior.

If a custom ops->critical exists, then it takes preference over
critical-actions.

Tested on a i.MX8MM board with the following devicetree changes:

	thermal-zones {
		cpu-thermal {
			critical-action = "reboot";
		};
	};

Signed-off-by: Fabio Estevam <festevam@denx.de>
---
Changes since v11:
- None

 drivers/thermal/thermal_of.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index 1e0655b63259..4d6c22e0ed85 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -475,6 +475,7 @@  static struct thermal_zone_device *thermal_of_zone_register(struct device_node *
 	struct thermal_zone_params tzp = {};
 	struct thermal_zone_device_ops *of_ops;
 	struct device_node *np;
+	const char *action;
 	int delay, pdelay;
 	int ntrips, mask;
 	int ret;
@@ -511,6 +512,11 @@  static struct thermal_zone_device *thermal_of_zone_register(struct device_node *
 
 	mask = GENMASK_ULL((ntrips) - 1, 0);
 
+	ret = of_property_read_string(np, "critical-action", &action);
+	if (!ret)
+		if (!of_ops->critical && !strcasecmp(action, "reboot"))
+			of_ops->critical = thermal_zone_device_critical_reboot;
+
 	tz = thermal_zone_device_register_with_trips(np->name, trips, ntrips,
 						     mask, data, of_ops, &tzp,
 						     pdelay, delay);