From patchwork Tue Jan 23 18:46:55 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Th=C3=A9o_Lebrun?= X-Patchwork-Id: 765351 Received: from relay6-d.mail.gandi.net (relay6-d.mail.gandi.net [217.70.183.198]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2F968129A65; Tue, 23 Jan 2024 18:47:13 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.198 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706035638; cv=none; b=H+9oqXtq+CzVlCCaTFp7wPpbjCIZbWzqpkkp+152hCsS47joxw6vZkoOKuhfL0QcA12JGlRckoyi7efeo4bebUoiCUwxNQ4xptaif/VpPTiu+xXfa7zHLWPp1f+ABVIcbCsLwKu3SioGnae8LBQefELi/AR7VI3wZqXUzX8Wth0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1706035638; c=relaxed/simple; bh=uuk5ZJNnp7hwBMq0qOXDSxDbEk3g6Jmp0Hv4JOCZbIk=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=O0qn4gMLiLFMi+buaTYPR6NoWVqPJ/wDbUOCRLumz88fDxyONuGoIhy8aBQQn72VhlhtADJXVOOo5krSIKU9xO35pk+dPsFTWCc/SXm5dSC4cYI5EdPkM34vMqDWpUsngCYTv5cXp491U32vrA0mXyj0GB6yuqXpoLrsnrWSal0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=b1GdQCaa; arc=none smtp.client-ip=217.70.183.198 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="b1GdQCaa" Received: by mail.gandi.net (Postfix) with ESMTPSA id 13FAAC0011; Tue, 23 Jan 2024 18:47:09 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1706035629; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=/659CNP7DMlNf44fXpBGy4taT/5l+5grnHN1/NR7rwU=; b=b1GdQCaaZ0opbzjCq3Jmg/qi/dRqK/lpgSqDXoMwGsYlHO/uJVBYGkdtYY+DoqoWsSvQvm lkm12jQNxLaa+00GZy2MOoWdF224B8BwFtjB1tVywtW8Tx2sAbbm3fFA/5yQnNQitRMHmF /GOzbJSiT4M0GrYP1XIvqXYaWXNluE1n0GyBL0sCk4m8JDNbk78wvKgkoX7IojkmqyuuCF KCazIUwtwQ0YFrdLaaNEOQ+EZBbkdwNTUpMGreEQE+VBKc7wkKCAuDd8no98/TLZWpMWKH NHCpZAtc/dn7IFsFt160i1NM3wtGtZVbKySKhwa6uBvzKMdjZ89983F4RB0m8w== From: =?utf-8?q?Th=C3=A9o_Lebrun?= Date: Tue, 23 Jan 2024 19:46:55 +0100 Subject: [PATCH v3 10/17] pinctrl: eyeq5: add platform driver Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240123-mbly-clk-v3-10-392b010b8281@bootlin.com> References: <20240123-mbly-clk-v3-0-392b010b8281@bootlin.com> In-Reply-To: <20240123-mbly-clk-v3-0-392b010b8281@bootlin.com> To: Gregory CLEMENT , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Thomas Bogendoerfer , Linus Walleij , =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= , Philipp Zabel Cc: Vladimir Kondratiev , linux-mips@vger.kernel.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Thomas Petazzoni , Tawfik Bayouk , linux-gpio@vger.kernel.org, =?utf-8?q?Th=C3=A9o_Lebrun?= X-Mailer: b4 0.12.4 X-GND-Sasl: theo.lebrun@bootlin.com Add the Mobileye EyeQ5 pin controller driver. It might grow to add later support of other platforms from Mobileye. It belongs to a syscon region called OLB. Existing pins and their function live statically in the driver code rather than in the devicetree, see compatible match data. Signed-off-by: Théo Lebrun --- MAINTAINERS | 1 + drivers/pinctrl/Kconfig | 15 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-eyeq5.c | 595 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 612 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index dd3b5834386f..9c423a4feb86 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14794,6 +14794,7 @@ F: arch/mips/boot/dts/mobileye/ F: arch/mips/configs/eyeq5_defconfig F: arch/mips/mobileye/board-epm5.its.S F: drivers/clk/clk-eyeq5.c +F: drivers/pinctrl/pinctrl-eyeq5.c F: drivers/reset/reset-eyeq5.c F: include/dt-bindings/clock/mobileye,eyeq5-clk.h F: include/dt-bindings/soc/mobileye,eyeq5.h diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 8163a5983166..abe94de85b3d 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -195,6 +195,21 @@ config PINCTRL_EQUILIBRIUM desired pin functions, configure GPIO attributes for LGM SoC pins. Pin muxing and pin config settings are retrieved from device tree. +config PINCTRL_EYEQ5 + bool "Mobileye EyeQ5 pinctrl driver" + depends on OF + depends on MACH_EYEQ5 || COMPILE_TEST + select PINMUX + select GENERIC_PINCONF + select MFD_SYSCON + default MACH_EYEQ5 + help + Pin controller driver for the Mobileye EyeQ5 platform. It does both + pin config & pin muxing. It does not handle GPIO. + + Pin muxing supports two functions for each pin: first is GPIO, second + is pin-dependent. Pin config is about bias & drive strength. + config PINCTRL_GEMINI bool depends on ARCH_GEMINI diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 1071f301cc70..0033940914d9 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o obj-$(CONFIG_PINCTRL_DA9062) += pinctrl-da9062.o obj-$(CONFIG_PINCTRL_DIGICOLOR) += pinctrl-digicolor.o obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += pinctrl-equilibrium.o +obj-$(CONFIG_PINCTRL_EYEQ5) += pinctrl-eyeq5.o obj-$(CONFIG_PINCTRL_GEMINI) += pinctrl-gemini.o obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o obj-$(CONFIG_PINCTRL_K210) += pinctrl-k210.o diff --git a/drivers/pinctrl/pinctrl-eyeq5.c b/drivers/pinctrl/pinctrl-eyeq5.c new file mode 100644 index 000000000000..2d8e5b2168bd --- /dev/null +++ b/drivers/pinctrl/pinctrl-eyeq5.c @@ -0,0 +1,595 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Pinctrl driver for the Mobileye EyeQ5 platform. + * + * The registers are located in a syscon region called OLB. There are two pin + * banks, each being controlled by 5 registers (see enum eq5p_regs) for + * pull-down, pull-up, drive strength and muxing. + * + * For each pin, muxing is between two functions: (0) GPIO or (1) another one + * that is pin-dependent. Functions are declared statically in this driver. + * + * We create pinctrl groups that are 1:1 equivalent to pins: each group has a + * single pin, and its index/selector is the pin number/offset. + * + * We use eq5p_ as prefix, as-in "EyeQ5 Pinctrl", but way shorter. + * + * Copyright (C) 2024 Mobileye Vision Technologies Ltd. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "pinctrl-utils.h" + +#define GPIO_FUNC_SELECTOR 0 + +struct eq5p_pinctrl { + struct pinctrl_desc desc; + + struct regmap *olb; + const unsigned int *regs; /* array of size EQ5P_REG_MAX */ + + const struct eq5p_function *funcs; + unsigned int nfuncs; +}; + +struct eq5p_function { + const char *name; + const char * const *groups; + unsigned int ngroups; +}; + +/* OLB registers; those are offsets in an array of address offsets. */ +enum eq5p_regs { + EQ5P_PD, + EQ5P_PU, + EQ5P_DS_LOW, + EQ5P_DS_HIGH, + EQ5P_IOCR, + + EQ5P_REG_MAX +}; + +static int eq5p_pinctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + return pctldev->desc->npins; +} + +static const char *eq5p_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return pctldev->desc->pins[selector].name; +} + +static int eq5p_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned int selector, + const unsigned int **pins, + unsigned int *num_pins) +{ + *pins = &pctldev->desc->pins[selector].number; + *num_pins = 1; + return 0; +} + +static int eq5p_pinconf_get(struct pinctrl_dev *pctldev, unsigned int offset, + unsigned long *config); + +static void eq5p_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, + unsigned int offset) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const char *pin_name = pctrl->desc.pins[offset].name; + const char *func_name, *bias; + unsigned int val_pd, val_pu, val_iocr; + unsigned long ds_config; + u32 drive_strength; + bool pd, pu; + int i, j; + + /* First, let's get the function name. */ + regmap_read(pctrl->olb, pctrl->regs[EQ5P_IOCR], &val_iocr); + if ((val_iocr & BIT(offset)) == 0) { + func_name = pctrl->funcs[GPIO_FUNC_SELECTOR].name; + } else { + /* All pins have only two functions: GPIO and something else. We + * look for this something else. + */ + func_name = NULL; + for (i = 0; i < pctrl->nfuncs; i++) { + if (i == GPIO_FUNC_SELECTOR) + continue; + + for (j = 0; j < pctrl->funcs[i].ngroups; j++) { + /* Groups and pins are the same thing for us. */ + const char *x = pctrl->funcs[i].groups[j]; + + if (strcmp(x, pin_name) == 0) { + func_name = pctrl->funcs[i].name; + break; + } + } + + if (func_name) + break; + } + + /* We have not found the function attached to this pin, this + * should never occur as all pins have exactly two functions. + */ + if (!func_name) + func_name = "unknown"; + } + + /* Second, we retrieve the bias. */ + regmap_read(pctrl->olb, pctrl->regs[EQ5P_PD], &val_pd); + pd = (val_pd & BIT(offset)) != 0; + regmap_read(pctrl->olb, pctrl->regs[EQ5P_PU], &val_pu); + pu = (val_pu & BIT(offset)) != 0; + if (pd && pu) + bias = "both"; + else if (pd && !pu) + bias = "pulldown"; + else if (!pd && pu) + bias = "pullup"; + else + bias = "none"; + + /* Third, we get the drive strength. */ + ds_config = pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH, 0); + eq5p_pinconf_get(pctldev, offset, &ds_config); + drive_strength = pinconf_to_config_argument(ds_config); + + seq_printf(s, "function=%s bias=%s drive_strength=%d", + func_name, bias, drive_strength); +} + +static const struct pinctrl_ops eq5p_pinctrl_ops = { + .get_groups_count = eq5p_pinctrl_get_groups_count, + .get_group_name = eq5p_pinctrl_get_group_name, + .get_group_pins = eq5p_pinctrl_get_group_pins, + .pin_dbg_show = eq5p_pinctrl_pin_dbg_show, + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, + .dt_free_map = pinctrl_utils_free_map, +}; + +static int eq5p_pinmux_get_functions_count(struct pinctrl_dev *pctldev) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->nfuncs; +} + +static const char *eq5p_pinmux_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + return pctrl->funcs[selector].name; +} + +static int eq5p_pinmux_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int selector, + const char * const **groups, + unsigned int *num_groups) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + + *groups = pctrl->funcs[selector].groups; + *num_groups = pctrl->funcs[selector].ngroups; + return 0; +} + +static int eq5p_pinmux_set_mux(struct pinctrl_dev *pctldev, + unsigned int func_selector, unsigned int offset) +{ + const char *group_name = pctldev->desc->pins[offset].name; + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const char *func_name = pctrl->funcs[func_selector].name; + bool is_gpio = func_selector == GPIO_FUNC_SELECTOR; + unsigned int reg, mask, val; + + dev_dbg(pctldev->dev, "%s: func=%s group=%s\n", __func__, func_name, + group_name); + + reg = pctrl->regs[EQ5P_IOCR]; + mask = BIT(offset); + val = is_gpio ? 0 : U32_MAX; + + regmap_update_bits(pctrl->olb, reg, mask, val); + + return 0; +} + +static int eq5p_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int offset) +{ + /* Pin offsets and group selectors are the same thing in our case. */ + return eq5p_pinmux_set_mux(pctldev, GPIO_FUNC_SELECTOR, offset); +} + +static const struct pinmux_ops eq5p_pinmux_ops = { + .get_functions_count = eq5p_pinmux_get_functions_count, + .get_function_name = eq5p_pinmux_get_function_name, + .get_function_groups = eq5p_pinmux_get_function_groups, + .set_mux = eq5p_pinmux_set_mux, + .gpio_request_enable = eq5p_pinmux_gpio_request_enable, + .strict = true, +}; + +static int eq5p_pinconf_get(struct pinctrl_dev *pctldev, unsigned int offset, + unsigned long *config) +{ + enum pin_config_param param = pinconf_to_config_param(*config); + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + unsigned int reg, val_pd, val_pu, val_ds; + bool pd, pu; + u32 arg = 0; + + regmap_read(pctrl->olb, pctrl->regs[EQ5P_PD], &val_pd); + pd = (val_pd & BIT(offset)) != 0; + regmap_read(pctrl->olb, pctrl->regs[EQ5P_PU], &val_pu); + pu = (val_pu & BIT(offset)) != 0; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + arg = !(pd || pu); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + arg = pd; + break; + case PIN_CONFIG_BIAS_PULL_UP: + arg = pu; + break; + case PIN_CONFIG_DRIVE_STRENGTH: + offset *= 2; /* two bits per pin */ + if (offset >= 32) { + reg = pctrl->regs[EQ5P_DS_HIGH]; + offset -= 32; + } else { + reg = pctrl->regs[EQ5P_DS_LOW]; + } + regmap_read(pctrl->olb, reg, &val_ds); + arg = (val_ds >> offset) & 0b11; + break; + default: + return -EOPNOTSUPP; + } + + *config = pinconf_to_config_packed(param, arg); + return 0; +} + +static int eq5p_pinconf_set_drive_strength(struct pinctrl_dev *pctldev, + unsigned int offset, u32 arg) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + unsigned int reg, mask, val; + + if (arg > 3) { + dev_err(pctldev->dev, "Unsupported drive strength: %u\n", arg); + return -EINVAL; + } + + offset *= 2; /* two bits per pin */ + + if (offset >= 32) { + reg = pctrl->regs[EQ5P_DS_HIGH]; + offset -= 32; + } else { + reg = pctrl->regs[EQ5P_DS_LOW]; + } + + mask = 0b11 << offset; + val = arg << offset; + regmap_update_bits(pctrl->olb, reg, mask, val); + return 0; +} + +static int eq5p_pinconf_set(struct pinctrl_dev *pctldev, unsigned int offset, + unsigned long *configs, unsigned int num_configs) +{ + struct eq5p_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const char *pin_name = pctldev->desc->pins[offset].name; + struct device *dev = pctldev->dev; + unsigned int i, val, reg_pd, reg_pu; + + val = BIT(offset); + reg_pd = pctrl->regs[EQ5P_PD]; + reg_pu = pctrl->regs[EQ5P_PU]; + + for (i = 0; i < num_configs; i++) { + enum pin_config_param param = pinconf_to_config_param(configs[i]); + u32 arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + dev_dbg(dev, "%s: pin=%s BIAS_DISABLE\n", + __func__, pin_name); + regmap_clear_bits(pctrl->olb, reg_pd, val); + regmap_clear_bits(pctrl->olb, reg_pu, val); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + dev_dbg(dev, "%s: pin=%s BIAS_PULL_DOWN arg=%u\n", + __func__, pin_name, arg); + if (arg == 0) /* cannot connect to GND */ + return -EOPNOTSUPP; + regmap_set_bits(pctrl->olb, reg_pd, val); + regmap_clear_bits(pctrl->olb, reg_pu, val); + break; + case PIN_CONFIG_BIAS_PULL_UP: + dev_dbg(dev, "%s: pin=%s BIAS_PULL_UP arg=%u\n", + __func__, pin_name, arg); + if (arg == 0) /* cannot connect to VDD */ + return -EOPNOTSUPP; + regmap_clear_bits(pctrl->olb, reg_pd, val); + regmap_set_bits(pctrl->olb, reg_pu, val); + break; + case PIN_CONFIG_DRIVE_STRENGTH: + dev_dbg(dev, "%s: pin=%s DRIVE_STRENGTH arg=%u\n", + __func__, pin_name, arg); + eq5p_pinconf_set_drive_strength(pctldev, offset, arg); + break; + default: + dev_err(dev, "Unsupported pinconf %u\n", param); + return -EOPNOTSUPP; + } + } + + return 0; +} + +static const struct pinconf_ops eq5p_pinconf_ops = { + .is_generic = true, + .pin_config_get = eq5p_pinconf_get, + .pin_config_set = eq5p_pinconf_set, + /* Pins and groups are equivalent in this driver. */ + .pin_config_group_get = eq5p_pinconf_get, + .pin_config_group_set = eq5p_pinconf_set, +}; + +/* + * Comments to the right of each pin are the "signal name" in the datasheet. + */ + +static const struct pinctrl_pin_desc eq5p_pins_a[] = { /* Bank A */ + PINCTRL_PIN(0, "PA0"), /* A0_TIMER0_CK */ + PINCTRL_PIN(1, "PA1"), /* A1_TIMER0_EOC */ + PINCTRL_PIN(2, "PA2"), /* A2_TIMER1_CK */ + PINCTRL_PIN(3, "PA3"), /* A3_TIMER1_EOC */ + PINCTRL_PIN(4, "PA4"), /* A4_TIMER2_CK */ + PINCTRL_PIN(5, "PA5"), /* A5_TIMER2_EOC */ + PINCTRL_PIN(6, "PA6"), /* A6_TIMER5_EXT_INCAP1 */ + PINCTRL_PIN(7, "PA7"), /* A7_TIMER5_EXT_INCAP2 */ + PINCTRL_PIN(8, "PA8"), /* A8_TIMER5_EXT_OUTCMP1 */ + PINCTRL_PIN(9, "PA9"), /* A9_TIMER5_EXT_OUTCMP2 */ + PINCTRL_PIN(10, "PA10"), /* A10_UART_0_TX */ + PINCTRL_PIN(11, "PA11"), /* A11_UART_0_RX */ + PINCTRL_PIN(12, "PA12"), /* A12_UART_1_TX */ + PINCTRL_PIN(13, "PA13"), /* A13_UART_1_RX */ + PINCTRL_PIN(14, "PA14"), /* A14_CAN_0_TX */ + PINCTRL_PIN(15, "PA15"), /* A15_CAN_0_RX */ + PINCTRL_PIN(16, "PA16"), /* A16_CAN_1_TX */ + PINCTRL_PIN(17, "PA17"), /* A17_CAN_1_RX */ + PINCTRL_PIN(18, "PA18"), /* A18_SPI_0_DO */ + PINCTRL_PIN(19, "PA19"), /* A19_SPI_0_DI */ + PINCTRL_PIN(20, "PA20"), /* A20_SPI_0_CK */ + PINCTRL_PIN(21, "PA21"), /* A21_SPI_0_CS0 */ + PINCTRL_PIN(22, "PA22"), /* A22_SPI_0_CS1 */ + PINCTRL_PIN(23, "PA23"), /* A23_SPI_1_DO */ + PINCTRL_PIN(24, "PA24"), /* A24_SPI_1_DI */ + PINCTRL_PIN(25, "PA25"), /* A25_SPI_1_CK */ + PINCTRL_PIN(26, "PA26"), /* A26_SPI_1_CS0 */ + PINCTRL_PIN(27, "PA27"), /* A27_SPI_1_CS1 */ + PINCTRL_PIN(28, "PA28"), /* A28_REF_CLK0 */ +}; + +static const struct pinctrl_pin_desc eq5p_pins_b[] = { /* Bank B */ + PINCTRL_PIN(0, "PB0"), /* B0_TIMER3_CK */ + PINCTRL_PIN(1, "PB1"), /* B1_TIMER3_EOC */ + PINCTRL_PIN(2, "PB2"), /* B2_TIMER4_CK */ + PINCTRL_PIN(3, "PB3"), /* B3_TIMER4_EOC */ + PINCTRL_PIN(4, "PB4"), /* B4_TIMER6_EXT_INCAP1 */ + PINCTRL_PIN(5, "PB5"), /* B5_TIMER6_EXT_INCAP2 */ + PINCTRL_PIN(6, "PB6"), /* B6_TIMER6_EXT_OUTCMP1 */ + PINCTRL_PIN(7, "PB7"), /* B7_TIMER6_EXT_OUTCMP2 */ + PINCTRL_PIN(8, "PB8"), /* B8_UART_2_TX */ + PINCTRL_PIN(9, "PB9"), /* B9_UART_2_RX */ + PINCTRL_PIN(10, "PB10"), /* B10_CAN_2_TX */ + PINCTRL_PIN(11, "PB11"), /* B11_CAN_2_RX */ + PINCTRL_PIN(12, "PB12"), /* B12_SPI_2_DO */ + PINCTRL_PIN(13, "PB13"), /* B13_SPI_2_DI */ + PINCTRL_PIN(14, "PB14"), /* B14_SPI_2_CK */ + PINCTRL_PIN(15, "PB15"), /* B15_SPI_2_CS0 */ + PINCTRL_PIN(16, "PB16"), /* B16_SPI_2_CS1 */ + PINCTRL_PIN(17, "PB17"), /* B17_SPI_3_DO */ + PINCTRL_PIN(18, "PB18"), /* B18_SPI_3_DI */ + PINCTRL_PIN(19, "PB19"), /* B19_SPI_3_CK */ + PINCTRL_PIN(20, "PB20"), /* B20_SPI_3_CS0 */ + PINCTRL_PIN(21, "PB21"), /* B21_SPI_3_CS1 */ + PINCTRL_PIN(22, "PB22"), /* B22_MCLK0 */ +}; + +/* Groups of functions on bank A */ +static const char * const gpioa_groups[] = { + "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", + "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PA16", "PA17", "PA18", + "PA19", "PA20", "PA21", "PA22", "PA23", "PA24", "PA25", "PA26", "PA27", + "PA28", +}; +static const char * const timer0_groups[] = { "PA0", "PA1" }; +static const char * const timer1_groups[] = { "PA2", "PA3" }; +static const char * const timer2_groups[] = { "PA4", "PA5" }; +static const char * const timer5_groups[] = { "PA6", "PA7", "PA8", "PA9" }; +static const char * const uart0_groups[] = { "PA10", "PA11" }; +static const char * const uart1_groups[] = { "PA12", "PA13" }; +static const char * const can0_groups[] = { "PA14", "PA15" }; +static const char * const can1_groups[] = { "PA16", "PA17" }; +static const char * const spi0_groups[] = { "PA18", "PA19", "PA20", "PA21", "PA22" }; +static const char * const spi1_groups[] = { "PA23", "PA24", "PA25", "PA26", "PA27" }; +static const char * const refclk0_groups[] = { "PA28" }; + +/* Groups of functions on bank B */ +static const char * const gpiob_groups[] = { + "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", + "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PB16", "PB17", "PB18", + "PB19", "PB20", "PB21", "PB22", +}; +static const char * const timer3_groups[] = { "PB0", "PB1" }; +static const char * const timer4_groups[] = { "PB2", "PB3" }; +static const char * const timer6_groups[] = { "PB4", "PB5", "PB6", "PB7" }; +static const char * const uart2_groups[] = { "PB8", "PB9" }; +static const char * const can2_groups[] = { "PB10", "PB11" }; +static const char * const spi2_groups[] = { "PB12", "PB13", "PB14", "PB15", "PB16" }; +static const char * const spi3_groups[] = { "PB17", "PB18", "PB19", "PB20", "PB21" }; +static const char * const mclk0_groups[] = { "PB22" }; + +#define FUNCTION(a, b) { .name = a, .groups = b, .ngroups = ARRAY_SIZE(b) } + +static const struct eq5p_function eq5p_functions_a[] = { + /* GPIO having a fixed index is depended upon, see GPIO_FUNC_SELECTOR. */ + FUNCTION("gpio", gpioa_groups), + + FUNCTION("timer0", timer0_groups), + FUNCTION("timer1", timer1_groups), + FUNCTION("timer2", timer2_groups), + FUNCTION("timer5", timer5_groups), + FUNCTION("uart0", uart0_groups), + FUNCTION("uart1", uart1_groups), + FUNCTION("can0", can0_groups), + FUNCTION("can1", can1_groups), + FUNCTION("spi0", spi0_groups), + FUNCTION("spi1", spi1_groups), + FUNCTION("refclk0", refclk0_groups), +}; + +static const struct eq5p_function eq5p_functions_b[] = { + /* GPIO having a fixed index is depended upon, see GPIO_FUNC_SELECTOR. */ + FUNCTION("gpio", gpiob_groups), + + FUNCTION("timer3", timer3_groups), + FUNCTION("timer4", timer4_groups), + FUNCTION("timer6", timer6_groups), + FUNCTION("uart2", uart2_groups), + FUNCTION("can2", can2_groups), + FUNCTION("spi2", spi2_groups), + FUNCTION("spi3", spi3_groups), + FUNCTION("mclk0", mclk0_groups), +}; + +struct eq5p_match { + unsigned int regs[EQ5P_REG_MAX]; + const struct pinctrl_pin_desc *pins; + unsigned int npins; + const struct eq5p_function *funcs; + unsigned int nfuncs; +}; + +static int eq5p_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *parent_np = of_get_parent(np); + const struct eq5p_match *match = of_device_get_match_data(dev); + struct pinctrl_dev *pctldev; + struct eq5p_pinctrl *pctrl; + int ret; + + pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->olb = ERR_PTR(-ENODEV); + if (parent_np) + pctrl->olb = syscon_node_to_regmap(parent_np); + if (IS_ERR(pctrl->olb)) + pctrl->olb = syscon_regmap_lookup_by_phandle(np, "mobileye,olb"); + if (IS_ERR(pctrl->olb)) + return PTR_ERR(pctrl->olb); + + pctrl->regs = match->regs; + pctrl->funcs = match->funcs; + pctrl->nfuncs = match->nfuncs; + + pctrl->desc.name = dev_name(dev); + pctrl->desc.pins = match->pins; + pctrl->desc.npins = match->npins; + pctrl->desc.pctlops = &eq5p_pinctrl_ops; + pctrl->desc.pmxops = &eq5p_pinmux_ops; + pctrl->desc.confops = &eq5p_pinconf_ops; + pctrl->desc.owner = THIS_MODULE; + + ret = devm_pinctrl_register_and_init(dev, &pctrl->desc, pctrl, &pctldev); + if (ret) { + dev_err(dev, "Failed registering pinctrl device: %d\n", ret); + return ret; + } + + ret = pinctrl_enable(pctldev); + if (ret) { + dev_err(dev, "Failed enabling pinctrl device: %d\n", ret); + return ret; + } + + dev_info(dev, "probed\n"); + + return 0; +} + +static const struct eq5p_match eq5p_match_a = { + .regs = { + [EQ5P_PD] = 0x0C0, + [EQ5P_PU] = 0x0C4, + [EQ5P_DS_LOW] = 0x0D0, + [EQ5P_DS_HIGH] = 0x0D4, + [EQ5P_IOCR] = 0x0B0, + }, + .pins = eq5p_pins_a, + .npins = ARRAY_SIZE(eq5p_pins_a), + .funcs = eq5p_functions_a, + .nfuncs = ARRAY_SIZE(eq5p_functions_a), +}; + +static const struct eq5p_match eq5p_match_b = { + .regs = { + [EQ5P_PD] = 0x0C8, + [EQ5P_PU] = 0x0CC, + [EQ5P_DS_LOW] = 0x0D8, + [EQ5P_DS_HIGH] = 0x0DC, + [EQ5P_IOCR] = 0x0B4, + }, + .pins = eq5p_pins_b, + .npins = ARRAY_SIZE(eq5p_pins_b), + .funcs = eq5p_functions_b, + .nfuncs = ARRAY_SIZE(eq5p_functions_b), +}; + +static const struct of_device_id eq5p_match[] = { + { .compatible = "mobileye,eyeq5-a-pinctrl", .data = &eq5p_match_a }, + { .compatible = "mobileye,eyeq5-b-pinctrl", .data = &eq5p_match_b }, + {}, +}; + +static struct platform_driver eq5p_driver = { + .driver = { + .name = "eyeq5-pinctrl", + .of_match_table = eq5p_match, + }, + .probe = eq5p_probe, +}; + +static int __init eq5p_init(void) +{ + return platform_driver_register(&eq5p_driver); +} +core_initcall(eq5p_init);