diff mbox series

[v2,01/11] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two

Message ID 882739b10bd0a3b655baef9b7ee1958680aa0b04.1535462942.git.amit.kucheria@linaro.org
State New
Headers show
Series [v2,01/11] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two | expand

Commit Message

Amit Kucheria Aug. 28, 2018, 1:38 p.m. UTC 
We've earlier added support to split the register address space into TM
and SROT regions.

Split up the regmap address space into two for the remaining platforms
that have a similar register layout and make corresponding changes to
the get_temp_common() function used by these platforms.

Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT).  This is OK since the
code doesn't really use the SROT functionality yet.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

---
 arch/arm/boot/dts/qcom-msm8974.dtsi   | 5 +++--
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +++--
 drivers/thermal/qcom/tsens-common.c   | 5 +++--
 3 files changed, 9 insertions(+), 6 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a49b292..56dbbf788d15 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -427,9 +427,10 @@ 
 			};
 		};
 
-		tsens: thermal-sensor@fc4a8000 {
+		tsens: thermal-sensor@fc4a9000 {
 			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a8000 0x2000>;
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#thermal-sensor-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7b32b8990d62..6a277fce3333 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -761,9 +761,10 @@ 
 			};
 		};
 
-		tsens: thermal-sensor@4a8000 {
+		tsens: thermal-sensor@4a9000 {
 			compatible = "qcom,msm8916-tsens";
-			reg = <0x4a8000 0x2000>;
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 			nvmem-cell-names = "calib", "calib_sel";
 			#thermal-sensor-cells = <1>;
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 6207d8d92351..478739543bbc 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -21,7 +21,7 @@ 
 #include <linux/regmap.h>
 #include "tsens.h"
 
-#define S0_ST_ADDR		0x1030
+#define STATUS_OFFSET		0x30
 #define SN_ADDR_OFFSET		0x4
 #define SN_ST_TEMP_MASK		0x3ff
 #define CAL_DEGC_PT1		30
@@ -107,8 +107,9 @@  int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 	unsigned int status_reg;
 	int last_temp = 0, ret;
 
-	status_reg = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
+	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET;
 	ret = regmap_read(tmdev->map, status_reg, &code);
+
 	if (ret)
 		return ret;
 	last_temp = code & SN_ST_TEMP_MASK;