diff mbox series

[v2,01/33] arm64: zynqmp: Disable CCI by default

Message ID f507d45fbaa0bd31f641e758efa40a2532466ced.1623684253.git.michal.simek@xilinx.com
State Accepted
Commit 4234645d1ff55e1bba26b5741ff167980e0a27ea
Headers show
Series [v2,01/33] arm64: zynqmp: Disable CCI by default | expand

Commit Message

Michal Simek June 14, 2021, 3:25 p.m. UTC 
There is no reason to have CCI no enabled by default. Enable it when your
system configuration requires it. In Xilinx configuration flow this is work
for Device Tree Generator which reads information from HW Design
configuration.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Changes in v2: None

 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 28dccb891a53..302ca0196c34 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -245,6 +245,7 @@  can1: can@ff070000 {
 
 		cci: cci@fd6e0000 {
 			compatible = "arm,cci-400";
+			status = "disabled";
 			reg = <0x0 0xfd6e0000 0x0 0x9000>;
 			ranges = <0x0 0x0 0xfd6e0000 0x10000>;
 			#address-cells = <1>;