@@ -43,13 +43,13 @@ SECTIONS
*(.rodata.*)
_erodata = . ;
}
- .data : {
+ .data : ALIGN(0x1000) {
_data = . ;
*(.data)
*(.data.*)
/* Add 4 bytes of extra space for a CRC-32 checksum */
- . = ALIGN(. + 4, 0x20);
+ . = ALIGN(. + 4, 0x200);
_edata = . ;
}
. = ALIGN(L1_CACHE_BYTES);
@@ -36,6 +36,9 @@ SYSSEG = 0x1000 /* historical load address >> 4 */
#define ROOT_RDONLY 1
#endif
+ .set salign, 0x1000
+ .set falign, 0x200
+
.code16
.section ".bstext", "ax"
#ifdef CONFIG_EFI_STUB
@@ -82,7 +85,7 @@ optional_header:
.long setup_size + ZO_efi_pe_entry # AddressOfEntryPoint
- .long 0x0200 # BaseOfCode
+ .long setup_size # BaseOfCode
#ifdef CONFIG_X86_32
.long 0 # data
#endif
@@ -93,8 +96,8 @@ extra_header_fields:
#else
.quad 0 # ImageBase
#endif
- .long 0x20 # SectionAlignment
- .long 0x20 # FileAlignment
+ .long salign # SectionAlignment
+ .long falign # FileAlignment
.word 0 # MajorOperatingSystemVersion
.word 0 # MinorOperatingSystemVersion
.word LINUX_EFISTUB_MAJOR_VERSION # MajorImageVersion
@@ -103,9 +106,10 @@ extra_header_fields:
.word 0 # MinorSubsystemVersion
.long 0 # Win32VersionValue
- .long setup_size + ZO__end # SizeOfImage
+ .long setup_size + ZO__end + pecompat_vsize
+ # SizeOfImage
- .long 0x200 # SizeOfHeaders
+ .long salign # SizeOfHeaders
.long 0 # CheckSum
.word IMAGE_SUBSYSTEM_EFI_APPLICATION # Subsystem (EFI application)
#ifdef CONFIG_EFI_DXE_MEM_ATTRIBUTES
@@ -136,44 +140,51 @@ extra_header_fields:
# Section table
section_table:
- #
- # The offset & size fields are filled in by build.c.
- #
.ascii ".setup"
.byte 0
.byte 0
- .long 0
- .long 0x0 # startup_{32,64}
- .long 0 # Size of initialized data
- # on disk
- .long 0x0 # startup_{32,64}
- .long 0 # PointerToRelocations
- .long 0 # PointerToLineNumbers
- .word 0 # NumberOfRelocations
- .word 0 # NumberOfLineNumbers
- .long IMAGE_SCN_CNT_CODE | \
+ .long setup_size - salign # VirtualSize
+ .long salign # VirtualAddress
+ .long pecompat_fstart - salign # SizeOfRawData
+ .long salign # PointerToRawData
+
+ .long 0, 0, 0
+ .long IMAGE_SCN_CNT_INITIALIZED_DATA | \
IMAGE_SCN_MEM_READ | \
- IMAGE_SCN_MEM_EXECUTE # Characteristics
+ IMAGE_SCN_MEM_DISCARDABLE # Characteristics
#ifdef CONFIG_EFI_MIXED
- #
- # The offset & size fields are filled in by build.c.
- #
.asciz ".compat"
- .long 0
- .long 0x0
- .long 0 # Size of initialized data
- # on disk
- .long 0x0
- .long 0 # PointerToRelocations
- .long 0 # PointerToLineNumbers
- .word 0 # NumberOfRelocations
- .word 0 # NumberOfLineNumbers
+
+ .long 8 # VirtualSize
+ .long setup_size + ZO__end # VirtualAddress
+ .long pecompat_fsize # SizeOfRawData
+ .long pecompat_fstart # PointerToRawData
+
+ .long 0, 0, 0
.long IMAGE_SCN_CNT_INITIALIZED_DATA | \
IMAGE_SCN_MEM_READ | \
IMAGE_SCN_MEM_DISCARDABLE # Characteristics
-#endif
+ /*
+ * Put the IA-32 machine type and the associated entry point address in
+ * the .compat section, so loaders can figure out which other execution
+ * modes this image supports.
+ */
+ .pushsection ".pecompat", "a", @progbits
+ .balign falign
+ .set pecompat_vsize, salign
+ .globl pecompat_fstart
+pecompat_fstart:
+ .byte 0x1 # Version
+ .byte 8 # Size
+ .word IMAGE_FILE_MACHINE_I386 # PE machine type
+ .long setup_size + ZO_efi32_pe_entry # Entrypoint
+ .popsection
+#else
+ .set pecompat_vsize, 0
+ .set pecompat_fstart, setup_size
+#endif
.ascii ".text"
.byte 0
.byte 0
@@ -36,16 +36,17 @@ SECTIONS
. = ALIGN(16);
.data : { *(.data*) }
+ .pecompat : { *(.pecompat) }
+ PROVIDE(pecompat_fsize = setup_size - pecompat_fstart);
+
.signature : {
setup_sig = .;
LONG(0x5a5aaa55)
- /* Reserve some extra space for the compat section */
- setup_size = ALIGN(ABSOLUTE(.) + 32, 512);
+ setup_size = ALIGN(ABSOLUTE(.), 4096);
setup_sects = ABSOLUTE(setup_size / 512);
}
-
. = ALIGN(16);
.bss :
{
@@ -47,9 +47,6 @@ typedef unsigned int u32;
/* This must be large enough to hold the entire setup */
u8 buf[SETUP_SECT_MAX*512];
-#define PECOFF_COMPAT_RESERVE 0x20
-
-static unsigned long efi32_pe_entry;
static unsigned long _edata;
/*----------------------------------------------------------------------*/
@@ -136,85 +133,6 @@ static void usage(void)
die("Usage: build setup system zoffset.h image");
}
-#ifdef CONFIG_EFI_STUB
-
-static void update_pecoff_section_header_fields(char *section_name, u32 vma, u32 size, u32 datasz, u32 offset)
-{
- unsigned int pe_header;
- unsigned short num_sections;
- u8 *section;
-
- pe_header = get_unaligned_le32(&buf[0x3c]);
- num_sections = get_unaligned_le16(&buf[pe_header + 6]);
-
-#ifdef CONFIG_X86_32
- section = &buf[pe_header + 0xa8];
-#else
- section = &buf[pe_header + 0xb8];
-#endif
-
- while (num_sections > 0) {
- if (strncmp((char*)section, section_name, 8) == 0) {
- /* section header size field */
- put_unaligned_le32(size, section + 0x8);
-
- /* section header vma field */
- put_unaligned_le32(vma, section + 0xc);
-
- /* section header 'size of initialised data' field */
- put_unaligned_le32(datasz, section + 0x10);
-
- /* section header 'file offset' field */
- put_unaligned_le32(offset, section + 0x14);
-
- break;
- }
- section += 0x28;
- num_sections--;
- }
-}
-
-static void update_pecoff_section_header(char *section_name, u32 offset, u32 size)
-{
- update_pecoff_section_header_fields(section_name, offset, size, size, offset);
-}
-
-static void update_pecoff_setup(unsigned int size)
-{
- u32 setup_offset = 0x200;
- u32 compat_offset = size - PECOFF_COMPAT_RESERVE;
- u32 setup_size = compat_offset - setup_offset;
-
- update_pecoff_section_header(".setup", setup_offset, setup_size);
-
-#ifdef CONFIG_EFI_MIXED
- update_pecoff_section_header(".compat", compat_offset, PECOFF_COMPAT_RESERVE);
-
- /*
- * Put the IA-32 machine type (0x14c) and the associated entry point
- * address in the .compat section, so loaders can figure out which other
- * execution modes this image supports.
- */
- buf[compat_offset] = 0x1;
- buf[compat_offset + 1] = 0x8;
- put_unaligned_le16(0x14c, &buf[compat_offset + 2]);
- put_unaligned_le32(efi32_pe_entry + size, &buf[compat_offset + 4]);
-#endif
-}
-
-#else
-
-static inline void update_pecoff_setup(unsigned int size) {}
-
-#endif /* CONFIG_EFI_STUB */
-
-static int reserve_pecoff_compat_section(int c)
-{
- /* Reserve 0x20 bytes for .compat section */
- memset(buf+c, 0, PECOFF_COMPAT_RESERVE);
- return PECOFF_COMPAT_RESERVE;
-}
-
/*
* Parse zoffset.h and find the entry points. We could just #include zoffset.h
* but that would mean tools/build would have to be rebuilt every time. It's
@@ -243,7 +161,6 @@ static void parse_zoffset(char *fname)
p = (char *)buf;
while (p && *p) {
- PARSE_ZOFS(p, efi32_pe_entry);
PARSE_ZOFS(p, _edata);
p = strchr(p, '\n');
@@ -283,17 +200,14 @@ int main(int argc, char ** argv)
die("Boot block hasn't got boot flag (0xAA55)");
fclose(file);
- c += reserve_pecoff_compat_section(c);
-
/* Pad unused space with zeros */
- setup_sectors = (c + 511) / 512;
+ setup_sectors = (c + 4095) / 4096;
+ setup_sectors *= 8;
if (setup_sectors < SETUP_SECT_MIN)
setup_sectors = SETUP_SECT_MIN;
i = setup_sectors*512;
memset(buf+c, 0, i-c);
- update_pecoff_setup(i);
-
/* Open and stat the kernel file */
fd = open(argv[2], O_RDONLY);
if (fd < 0)