@@ -1,8 +1,3 @@
-* convert all uses of the old GPIO API from <linux/gpio.h> to the
- GPIO descriptor API in <linux/gpio/consumer.h> and look up GPIO
- lines from device tree, ACPI or board files, board files should
- use <linux/gpio/machine.h>
-
* convert all these over to drm_simple_display_pipe and submit for inclusion
into the DRM subsystem under drivers/gpu/drm - fbdev doesn't take any new
drivers anymore.
@@ -84,9 +84,9 @@ static void reset(struct fbtft_par *par)
dev_dbg(par->info->device, "%s()\n", __func__);
- gpiod_set_value(par->gpio.reset, 0);
- udelay(20);
gpiod_set_value(par->gpio.reset, 1);
+ udelay(20);
+ gpiod_set_value(par->gpio.reset, 0);
mdelay(120);
}
@@ -194,12 +194,12 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
/* select chip */
if (*buf) {
/* cs1 */
- gpiod_set_value(par->CS0, 1);
- gpiod_set_value(par->CS1, 0);
- } else {
- /* cs0 */
gpiod_set_value(par->CS0, 0);
gpiod_set_value(par->CS1, 1);
+ } else {
+ /* cs0 */
+ gpiod_set_value(par->CS0, 1);
+ gpiod_set_value(par->CS1, 0);
}
gpiod_set_value(par->RS, 0); /* RS->0 (command mode) */
@@ -397,8 +397,8 @@ static int write_vmem(struct fbtft_par *par, size_t offset, size_t len)
}
kfree(convert_buf);
- gpiod_set_value(par->CS0, 1);
- gpiod_set_value(par->CS1, 1);
+ gpiod_set_value(par->CS0, 0);
+ gpiod_set_value(par->CS1, 0);
return ret;
}
@@ -419,10 +419,10 @@ static int write(struct fbtft_par *par, void *buf, size_t len)
for (i = 0; i < 8; ++i)
gpiod_set_value(par->gpio.db[i], data & (1 << i));
/* set E */
- gpiod_set_value(par->EPIN, 1);
+ gpiod_set_value(par->EPIN, 0);
udelay(5);
/* unset E - write */
- gpiod_set_value(par->EPIN, 0);
+ gpiod_set_value(par->EPIN, 1);
udelay(1);
}
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "fbtft.h"
@@ -24,9 +23,6 @@
static int init_display(struct fbtft_par *par)
{
- if (par->gpio.cs)
- gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
-
par->fbtftops.reset(par);
/* Initialization sequence from Lib_UTFT */
@@ -11,7 +11,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <video/mipi_display.h>
@@ -77,9 +76,6 @@ static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
- if (par->gpio.cs)
- gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
-
write_reg(par, MIPI_DCS_SOFT_RESET); /* software reset */
mdelay(500);
write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); /* exit sleep */
@@ -8,7 +8,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "fbtft.h"
@@ -85,9 +84,6 @@ static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
- if (par->gpio.cs)
- gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
-
bt &= 0x07;
vc &= 0x07;
vrh &= 0x0f;
@@ -8,7 +8,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <video/mipi_display.h>
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "fbtft.h"
@@ -29,9 +28,6 @@ static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
- if (par->gpio.cs)
- gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
-
/* Initialization sequence from Lib_UTFT */
write_reg(par, 0x0011, 0x2004);
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "fbtft.h"
@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include "fbtft.h"
@@ -28,9 +27,6 @@ static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
- if (par->gpio.cs)
- gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
-
write_reg(par, 0x00, 0x0001);
write_reg(par, 0x03, 0xA8A4);
write_reg(par, 0x0C, 0x0000);
@@ -35,8 +35,6 @@ static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
- gpiod_set_value(par->gpio.cs, 0);
-
write_reg(par, 0xb3);
write_reg(par, 0xf0);
write_reg(par, 0xae);
@@ -81,8 +81,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
va_start(args, len);
*buf = (u8)va_arg(args, unsigned int);
- if (par->gpio.dc)
- gpiod_set_value(par->gpio.dc, 0);
+ gpiod_set_value(par->gpio.dc, 0);
ret = par->fbtftops.write(par, par->buf, sizeof(u8));
if (ret < 0) {
va_end(args);
@@ -104,8 +103,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
return;
}
}
- if (par->gpio.dc)
- gpiod_set_value(par->gpio.dc, 1);
+ gpiod_set_value(par->gpio.dc, 1);
va_end(args);
}
@@ -2,7 +2,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "fbtft.h"
@@ -26,9 +25,6 @@ static int init_display(struct fbtft_par *par)
{
par->fbtftops.reset(par);
- if (par->gpio.cs)
- gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
-
/* Initialization sequence from Lib_UTFT */
/* register reset */
@@ -8,7 +8,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "fbtft.h"
@@ -135,8 +135,7 @@ int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len)
remain = len / 2;
vmem16 = (u16 *)(par->info->screen_buffer + offset);
- if (par->gpio.dc)
- gpiod_set_value(par->gpio.dc, 1);
+ gpiod_set_value(par->gpio.dc, 1);
/* non buffered write */
if (!par->txbuf.buf)
@@ -38,8 +38,7 @@ int fbtft_write_buf_dc(struct fbtft_par *par, void *buf, size_t len, int dc)
{
int ret;
- if (par->gpio.dc)
- gpiod_set_value(par->gpio.dc, dc);
+ gpiod_set_value(par->gpio.dc, dc);
ret = par->fbtftops.write(par, buf, len);
if (ret < 0)
@@ -79,7 +78,7 @@ static int fbtft_request_one_gpio(struct fbtft_par *par,
int ret = 0;
*gpiop = devm_gpiod_get_index_optional(dev, name, index,
- GPIOD_OUT_HIGH);
+ GPIOD_OUT_LOW);
if (IS_ERR(*gpiop)) {
ret = PTR_ERR(*gpiop);
dev_err(dev,
@@ -226,11 +225,15 @@ static void fbtft_reset(struct fbtft_par *par)
{
if (!par->gpio.reset)
return;
+
fbtft_par_dbg(DEBUG_RESET, par, "%s()\n", __func__);
+
gpiod_set_value_cansleep(par->gpio.reset, 1);
usleep_range(20, 40);
gpiod_set_value_cansleep(par->gpio.reset, 0);
msleep(120);
+
+ gpiod_set_value_cansleep(par->gpio.cs, 1); /* Activate chip */
}
static void fbtft_update_display(struct fbtft_par *par, unsigned int start_line,
@@ -922,8 +925,6 @@ static int fbtft_init_display_from_property(struct fbtft_par *par)
goto out_free;
par->fbtftops.reset(par);
- if (par->gpio.cs)
- gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
index = -1;
val = values[++index];
@@ -1018,8 +1019,6 @@ int fbtft_init_display(struct fbtft_par *par)
}
par->fbtftops.reset(par);
- if (par->gpio.cs)
- gpiod_set_value(par->gpio.cs, 0); /* Activate chip */
i = 0;
while (i < FBTFT_MAX_INIT_SEQUENCE) {
@@ -142,12 +142,12 @@ int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
data = *(u8 *)buf;
/* Start writing by pulling down /WR */
- gpiod_set_value(par->gpio.wr, 0);
+ gpiod_set_value(par->gpio.wr, 1);
/* Set data */
#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
if (data == prev_data) {
- gpiod_set_value(par->gpio.wr, 0); /* used as delay */
+ gpiod_set_value(par->gpio.wr, 1); /* used as delay */
} else {
for (i = 0; i < 8; i++) {
if ((data & 1) != (prev_data & 1))
@@ -165,7 +165,7 @@ int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
#endif
/* Pullup /WR */
- gpiod_set_value(par->gpio.wr, 1);
+ gpiod_set_value(par->gpio.wr, 0);
#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
prev_data = *(u8 *)buf;
@@ -192,12 +192,12 @@ int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
data = *(u16 *)buf;
/* Start writing by pulling down /WR */
- gpiod_set_value(par->gpio.wr, 0);
+ gpiod_set_value(par->gpio.wr, 1);
/* Set data */
#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
if (data == prev_data) {
- gpiod_set_value(par->gpio.wr, 0); /* used as delay */
+ gpiod_set_value(par->gpio.wr, 1); /* used as delay */
} else {
for (i = 0; i < 16; i++) {
if ((data & 1) != (prev_data & 1))
@@ -215,7 +215,7 @@ int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
#endif
/* Pullup /WR */
- gpiod_set_value(par->gpio.wr, 1);
+ gpiod_set_value(par->gpio.wr, 0);
#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO
prev_data = *(u16 *)buf;
The infamous commit c440eee1a7a1 ("Staging: fbtft: Switch to the GPIO descriptor interface") broke GPIO handling completely. It has already four commits to rectify and it seems not enough. In order to fix the mess here we: 1) Set default to "inactive" for all requested pins 2) Fix CS, RD, and WR pins polarity since it's active low and GPIO descriptor interface takes it into consideration from the Device Tree or ACPI 3) Fix RESET pin polarity in the places missed by the commit b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor") 4) Consolidate chip activation (CS assert) under default ->reset() callback To summarize the expectations about polarity for GPIOs: #RD Low #WR Low #CS Low #RESET Low DC or RS High RW High Data 0..15 High See also Adafruit learning course [1] for the example of the schematics. While at it, drop unneeded NULL checks, since GPIO API is tolerant to that. At the end, update TODO to mark this job eventually done. [1]: https://learn.adafruit.com/adafruit-2-8-and-3-2-color-tft-touchscreen-breakout-v2/downloads Fixes: 92e3e884887c ("Staging: fbtft: Fix GPIO handling") Fixes: b918d1c27066 ("Staging: fbtft: Fix reset assertion when using gpio descriptor") Fixes: dbc4f989c878 ("Staging: fbtft: Fix probing of gpio descriptor") Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface") Cc: Jan Sebastian Götte <linux@jaseg.net> Cc: Phil Reid <preid@electromag.com.au> Cc: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/staging/fbtft/TODO | 5 ----- drivers/staging/fbtft/fb_agm1264k-fl.c | 20 ++++++++++---------- drivers/staging/fbtft/fb_bd663474.c | 4 ---- drivers/staging/fbtft/fb_ili9163.c | 4 ---- drivers/staging/fbtft/fb_ili9320.c | 1 - drivers/staging/fbtft/fb_ili9325.c | 4 ---- drivers/staging/fbtft/fb_ili9340.c | 1 - drivers/staging/fbtft/fb_s6d1121.c | 4 ---- drivers/staging/fbtft/fb_sh1106.c | 1 - drivers/staging/fbtft/fb_ssd1289.c | 4 ---- drivers/staging/fbtft/fb_ssd1325.c | 2 -- drivers/staging/fbtft/fb_ssd1331.c | 6 ++---- drivers/staging/fbtft/fb_ssd1351.c | 1 - drivers/staging/fbtft/fb_upd161704.c | 4 ---- drivers/staging/fbtft/fb_watterott.c | 1 - drivers/staging/fbtft/fbtft-bus.c | 3 +-- drivers/staging/fbtft/fbtft-core.c | 13 ++++++------- drivers/staging/fbtft/fbtft-io.c | 12 ++++++------ 18 files changed, 25 insertions(+), 65 deletions(-)