mbox series

[v5,0/3] Migrate the PCIe-IDIO-24 and WS16C48 GPIO drivers to the regmap API

Message ID cover.1679845842.git.william.gray@linaro.org
Headers show
Series Migrate the PCIe-IDIO-24 and WS16C48 GPIO drivers to the regmap API | expand

Message

William Breathitt Gray March 26, 2023, 4:25 p.m. UTC 
Changes in v5:
 - Refactor for map parameter removal from handle_mask_sync()
 - Cleanups and line wrappings to 100 characters rather than 80
 - Adjust to change mutex/spinlock_t type locks to raw_spin_lock_t type
 - Remove pex8311_intcsr table configurations as superfluous
 - Adjust to set pex8311_intcsr_regmap_config reg_base to
   PLX_PEX8311_PCI_LCS_INTCSR
 - Rename PAGE_FIELD_PAGE_* defines to POL_PAGE, ENAB_PAGE, and
   INT_ID_PAGE
Changes in v4:
 - Allocate idio24gpio before using it in idio_24_probe()
Changes in v3:
 - Drop map from set_type_config() parameter list; regmap can be passed
   by irq_drv_data instead
 - Adjust idio_24_set_type_config() for parameter list
 - Add mutex to prevent clobbering the COS_ENABLE register when masking
   IRQ and setting their type configuration
Changes in v2:
 - Simplify PCIe-IDIO-24 register offset defines to remove superfluous
   arithmetic
 - Check for NULL pointer after chip->irq_drv_data allocation
 - Set gpio_regmap drvdata and use gpio_regmap_get_drvdata() to get the
   regmap in idio_24_reg_map_xlate()

The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.

A patch to pass irq_drv_data as a parameter for struct regmap_irq_chip
set_type_config() is included. This is needed by the
idio_24_set_type_config() and ws16c48_set_type_config() callbacks in
order to update the type configuration on their respective devices.

This patchset depends on the "Drop map from handle_mask_sync()
parameters" patchset [0].

[0] https://lore.kernel.org/all/cover.1679323449.git.william.gray@linaro.org/

William Breathitt Gray (3):
  regmap: Pass irq_drv_data as a parameter for set_type_config()
  gpio: pcie-idio-24: Migrate to the regmap API
  gpio: ws16c48: Migrate to the regmap API

 drivers/base/regmap/regmap-irq.c |   6 +-
 drivers/gpio/Kconfig             |   6 +
 drivers/gpio/gpio-pcie-idio-24.c | 677 +++++++++++--------------------
 drivers/gpio/gpio-ws16c48.c      | 552 +++++++++----------------
 include/linux/regmap.h           |   5 +-
 5 files changed, 445 insertions(+), 801 deletions(-)


base-commit: 2093bcd872321a5301470978231b23cc121e3476
prerequisite-patch-id: cd19046150b7cff1be4ac7152198777aa960a3df
prerequisite-patch-id: bd3e3830d9ce4f3876a77483364d7190b7fdffa7