From patchwork Sun Oct 4 16:29:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Martin Blumenstingl X-Patchwork-Id: 267407 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.6 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5C088C47095 for ; Sun, 4 Oct 2020 18:00:44 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1E2D0206DD for ; Sun, 4 Oct 2020 18:00:44 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=googlemail.com header.i=@googlemail.com header.b="hJmwYd2B" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726363AbgJDSAe (ORCPT ); Sun, 4 Oct 2020 14:00:34 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48146 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726237AbgJDSAb (ORCPT ); Sun, 4 Oct 2020 14:00:31 -0400 Received: from mail-ej1-x641.google.com (mail-ej1-x641.google.com [IPv6:2a00:1450:4864:20::641]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8FF60C0613D0; Sun, 4 Oct 2020 11:00:31 -0700 (PDT) Received: by mail-ej1-x641.google.com with SMTP id lw21so4679274ejb.6; Sun, 04 Oct 2020 11:00:31 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=20161025; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=UCJ2Al+Kxhyem7n13XC8d7BNcmUOhG5PSSfPR0UXFnU=; b=hJmwYd2BuvdGWGh1TM2bxoZEmTCGsjYD4wis1vCnvmI38Z67z9juig/cHyZSIsPzqf 9zZoH8OO9L0SjXNa7q0X7kL4CV/NdN8EbwKLdZLIeUol+gg8ij0k7qDAk7OV7N3zB6HW ccePv1DfO4vA+RXRbyO6VCDwRn1cXbvWfoYkizaVpGkPnks7JtPIv/a5kDNTBrK+6wAQ 1s/PYD1hh1BZ2MEoMp+YvpKeWKUSZB7kz5FaZ4UdIqb8HLdI1gk01NhlMvEdlKh8Tswv VhBIahx2EjFaFDKjRQ2uNgpACwd1neGstVhpGttVJi4vvgeBrLGyMHcXzkWNkIjrZ+xI 5R+Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=UCJ2Al+Kxhyem7n13XC8d7BNcmUOhG5PSSfPR0UXFnU=; b=DxDdoYANIHqlH5t1nvrp9xc9VeYfzA9rmt0ghptZOqBFKR5+kbTHlBEnH9iLE/YGvK 0m5ScPDVaoPZjckMUXgaKtwnKPOMYa5k83nWlpwdyxqljBT0WrC4MAqLNyel77/tR/Cu 1R5Arp8aflOXbD1xb21viplijiPJY2lrcghfQLEmVdG8Mo8Empx+vNIFf309AyrqHrFG SwkS1wxGjgZhOjkQqUG1CDwmljSa93p3BN0M2JO7NgkVNQg7bf4+De6IrXI+wsD8QFV6 2X2IivWAyomWE2PM6YmYwni8n6sTviVYhNxyKzxCdbQK8OihqoRkKVUidoT2H2IwAqyz 8HRA== X-Gm-Message-State: AOAM531NIvGfP7R4AJLtctV8GjXdbxRpew33TfpwedxYJNiq6FraqiVw i8s4jL1jxBZ5upSOPXbfhIv6wx3jGwc= X-Google-Smtp-Source: ABdhPJxo9InvtizPDR2EVD3KhOhPBtBohX7voenXF/jD/qJs+Az8fFpxm0LYRmE2fbHXJLERThcs8g== X-Received: by 2002:a17:907:338c:: with SMTP id zj12mr11539447ejb.224.1601834429967; Sun, 04 Oct 2020 11:00:29 -0700 (PDT) Received: from localhost.localdomain (p4fc3e21a.dip0.t-ipconnect.de. [79.195.226.26]) by smtp.googlemail.com with ESMTPSA id n11sm6065906ejs.38.2020.10.04.11.00.28 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 04 Oct 2020 11:00:29 -0700 (PDT) From: Martin Blumenstingl To: linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, robh+dt@kernel.org, bgolaszewski@baylibre.com, linus.walleij@linaro.org Cc: linux-kernel@vger.kernel.org, bhelgaas@google.com, Martin Blumenstingl Subject: [RFC PATCH 3/3] gpio: ej1x8: Add GPIO driver for Etron Tech Inc. EJ168/EJ188/EJ198 Date: Sun, 4 Oct 2020 18:29:08 +0200 Message-Id: <20201004162908.3216898-4-martin.blumenstingl@googlemail.com> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20201004162908.3216898-1-martin.blumenstingl@googlemail.com> References: <20201004162908.3216898-1-martin.blumenstingl@googlemail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org EJ168/EJ188/EJ198 are USB xHCI controllers. They also contain four GPIO lines which are used on some systems to toggle an LED based on whether a USB device is connected. There is no public datasheet available for this hardware. All information in this driver is taken from the "F9K1115v2.03.97-GPL-10.2.85-20140313" GPL code dump of the Belkin F9K1115v2. This board comes with an EJ168 USB xHCI controller and the USB 3.0 LED is connected to one of the GPIOs. Inside the GPL source archive the related code can be found in: linux/kernels/mips-linux-2.6.31/drivers/usb/host/etxhci-pci.c Signed-off-by: Martin Blumenstingl --- drivers/gpio/Kconfig | 9 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-ej1x8.c | 311 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 321 insertions(+) create mode 100644 drivers/gpio/gpio-ej1x8.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 8030fd91a3cc..88820b04ffa5 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -215,6 +215,15 @@ config GPIO_EIC_SPRD help Say yes here to support Spreadtrum EIC device. +config GPIO_EJ1X8 + tristate "Etron Tech Inc. EJ168/EJ188/EJ198 GPIO driver" + depends on OF_GPIO && PCI + help + Selecting this option will enable the GPIO pins present on + the Etron Tech Inc. EJ168/EJ188/EJ198 USB xHCI controllers. + + If unsure, say N. + config GPIO_EM tristate "Emma Mobile GPIO" depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 4f9abff4f2dc..6d5e345b1f2d 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o +obj-$(CONFIG_GPIO_EJ1X8) += gpio-ej1x8.o obj-$(CONFIG_GPIO_EM) += gpio-em.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o diff --git a/drivers/gpio/gpio-ej1x8.c b/drivers/gpio/gpio-ej1x8.c new file mode 100644 index 000000000000..c673e62c34f8 --- /dev/null +++ b/drivers/gpio/gpio-ej1x8.c @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (C) 2020 Martin Blumenstingl */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define EJ1X8_GPIO_INIT 0x44 +#define EJ1X8_GPIO_WRITE 0x68 +#define EJ1X8_GPIO_READ 0x6c + +#define EJ1X8_GPIO_CTRL 0x18005020 +#define EJ1X8_GPIO_CTRL_READ_ALL_MASK GENMASK(7, 0) +#define EJ1X8_GPIO_CTRL_WRITE_ALL_MASK GENMASK(23, 16) +#define EJ1X8_GPIO_CTRL_OUT_LOW 0x0 +#define EJ1X8_GPIO_CTRL_OUT_HIGH 0x1 +#define EJ1X8_GPIO_CTRL_IN 0x2 +#define EJ1X8_GPIO_CTRL_MASK 0x3 + +#define EJ1X8_GPIO_MODE 0x18005022 +#define EJ1X8_GPIO_MODE_READ_WRITE_ALL_MASK GENMASK(23, 16) +#define EJ1X8_GPIO_MODE_DISABLE 0x0 +#define EJ1X8_GPIO_MODE_ENABLE 0x1 +#define EJ1X8_GPIO_MODE_MASK 0x3 + +static LIST_HEAD(ej1x8_gpios); + +struct ej1x8_gpio { + spinlock_t lock; + struct pci_dev *pci_dev; + struct gpio_chip chip; + struct list_head list_head; +}; + +static u8 ej1x8_gpio_shift(unsigned int gpio, u8 mask) +{ + return (gpio * fls(mask)); +} + +static u8 ej1x8_gpio_mask(unsigned int gpio, u8 mask) +{ + return mask << ej1x8_gpio_shift(gpio, mask); +} + +static int ej1x8_gpio_read(struct gpio_chip *gc, u32 reg, u32 *value) +{ + struct ej1x8_gpio *ej1x8 = gpiochip_get_data(gc); + int err; + + err = pci_write_config_dword(ej1x8->pci_dev, EJ1X8_GPIO_WRITE, reg); + if (err) { + dev_err(gc->parent, "Failed to select 0x%08x register\n", reg); + return err; + } + + usleep_range(1000, 10000); + + err = pci_read_config_dword(ej1x8->pci_dev, EJ1X8_GPIO_READ, value); + if (err) { + dev_err(gc->parent, "Failed to read 0x%08x register\n", reg); + return err; + } + + return 0; +} + +static int ej1x8_gpio_write(struct gpio_chip *gc, u32 reg, u32 value) +{ + struct ej1x8_gpio *ej1x8 = gpiochip_get_data(gc); + int err; + + err = pci_write_config_dword(ej1x8->pci_dev, EJ1X8_GPIO_WRITE, + reg | value | BIT(24)); + if (err) { + dev_err(gc->parent, "Failed to write 0x%08x register\n", reg); + return err; + } + + usleep_range(1000, 10000); + + return 0; +} + +static int ej1x8_gpio_config(struct gpio_chip *gc, unsigned int gpio, u8 mode, + u8 ctrl) +{ + struct ej1x8_gpio *ej1x8 = gpiochip_get_data(gc); + u8 all_gpio_ctrl, all_gpio_mode; + u32 temp; + int err; + + spin_lock(&ej1x8->lock); + + err = pci_read_config_dword(ej1x8->pci_dev, EJ1X8_GPIO_INIT, &temp); + if (err) { + dev_err(gc->parent, "Failed to read INIT register\n"); + return err; + } + + err = pci_write_config_dword(ej1x8->pci_dev, EJ1X8_GPIO_INIT, + temp | 0x1); + if (err) { + dev_err(gc->parent, "Failed to write INIT register\n"); + return err; + } + + err = ej1x8_gpio_read(gc, EJ1X8_GPIO_CTRL, &temp); + if (err) + goto err_unlock; + + all_gpio_ctrl = FIELD_GET(EJ1X8_GPIO_CTRL_READ_ALL_MASK, temp); + all_gpio_ctrl &= ~ej1x8_gpio_mask(gpio, EJ1X8_GPIO_CTRL_MASK); + all_gpio_ctrl |= ctrl << ej1x8_gpio_shift(gpio, EJ1X8_GPIO_CTRL_MASK); + + err = ej1x8_gpio_read(gc, EJ1X8_GPIO_MODE, &temp); + if (err) + goto err_unlock; + + all_gpio_mode = FIELD_GET(EJ1X8_GPIO_MODE_READ_WRITE_ALL_MASK, temp); + all_gpio_mode &= ~ej1x8_gpio_mask(gpio, EJ1X8_GPIO_MODE_MASK); + all_gpio_mode |= mode << ej1x8_gpio_shift(gpio, EJ1X8_GPIO_MODE_MASK); + + err = ej1x8_gpio_write(gc, EJ1X8_GPIO_CTRL, + FIELD_PREP(EJ1X8_GPIO_CTRL_WRITE_ALL_MASK, + all_gpio_ctrl)); + if (err) + goto err_unlock; + + err = ej1x8_gpio_write(gc, EJ1X8_GPIO_MODE, + FIELD_PREP(EJ1X8_GPIO_MODE_READ_WRITE_ALL_MASK, + all_gpio_mode)); + if (err) + goto err_unlock; + + spin_unlock(&ej1x8->lock); + + return 0; + +err_unlock: + spin_unlock(&ej1x8->lock); + return err; +} + +static int ej1x8_gpio_get_mode(struct gpio_chip *gc, unsigned int gpio, u8 *mode) +{ + struct ej1x8_gpio *ej1x8 = gpiochip_get_data(gc); + u32 temp, all_gpio_mode; + int err; + + spin_lock(&ej1x8->lock); + err = ej1x8_gpio_read(gc, EJ1X8_GPIO_MODE, &temp); + spin_unlock(&ej1x8->lock); + + if (err) + return err; + + all_gpio_mode = FIELD_GET(EJ1X8_GPIO_MODE_READ_WRITE_ALL_MASK, temp); + *mode = all_gpio_mode >> ej1x8_gpio_shift(gpio, EJ1X8_GPIO_MODE_MASK); + *mode &= EJ1X8_GPIO_MODE_MASK; + + return 0; +} + +static void ej1x8_gpio_free(struct gpio_chip *gc, unsigned int gpio) +{ + ej1x8_gpio_config(gc, gpio, EJ1X8_GPIO_MODE_DISABLE, EJ1X8_GPIO_CTRL_IN); +} + +static int ej1x8_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio) +{ + u8 mode; + int err; + + err = ej1x8_gpio_get_mode(gc, gpio, &mode); + if (err) + return err; + + switch (mode) { + case EJ1X8_GPIO_CTRL_IN: + return GPIO_LINE_DIRECTION_IN; + + case EJ1X8_GPIO_CTRL_OUT_HIGH: + case EJ1X8_GPIO_CTRL_OUT_LOW: + return GPIO_LINE_DIRECTION_OUT; + + default: + return -EINVAL; + } +} + +static int ej1x8_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio, + int value) +{ + u8 gpio_ctrl; + + if (value) + gpio_ctrl = EJ1X8_GPIO_CTRL_OUT_HIGH; + else + gpio_ctrl = EJ1X8_GPIO_CTRL_OUT_LOW; + + return ej1x8_gpio_config(gc, gpio, EJ1X8_GPIO_MODE_ENABLE, gpio_ctrl); +} + +static int ej1x8_gpio_get_value(struct gpio_chip *gc, unsigned int gpio) +{ + u8 mode; + int err; + + err = ej1x8_gpio_get_mode(gc, gpio, &mode); + if (err) + return err; + + switch (mode) { + case EJ1X8_GPIO_CTRL_OUT_HIGH: + return 1; + + case EJ1X8_GPIO_CTRL_OUT_LOW: + return 0; + + default: + return -EINVAL; + } +} + +static void ej1x8_gpio_set_value(struct gpio_chip *gc, unsigned int gpio, int value) +{ + ej1x8_gpio_direction_output(gc, gpio, value); +} + +static const struct pci_device_id ej1x8_gpio_pci_ids[] __initconst = { + { PCI_DEVICE(PCI_VENDOR_ID_ETRON, PCI_DEVICE_ID_ETRON_EJ168) }, + { PCI_DEVICE(PCI_VENDOR_ID_ETRON, PCI_DEVICE_ID_ETRON_EJ188) }, + { /* sentinel */ } +}; + +static int __init ej1x8_gpio_init(void) +{ + struct pci_dev *pci_dev = NULL; + struct ej1x8_gpio *ej1x8; + int err; + + for_each_pci_dev(pci_dev) { + if (!pci_match_id(ej1x8_gpio_pci_ids, pci_dev)) + continue; + + if (!device_property_read_bool(&pci_dev->dev, "gpio-controller")) + continue; + + ej1x8 = kzalloc(sizeof(*ej1x8), GFP_KERNEL); + if (!ej1x8) + continue; + + spin_lock_init(&ej1x8->lock); + ej1x8->pci_dev = pci_dev_get(pci_dev); + + /* TODO: input mode is supported by the hardware but not the driver */ + ej1x8->chip.label = dev_name(&pci_dev->dev); + ej1x8->chip.owner = THIS_MODULE; + ej1x8->chip.parent = &pci_dev->dev; + ej1x8->chip.of_node = pci_dev->dev.of_node; + ej1x8->chip.free = ej1x8_gpio_free; + ej1x8->chip.get_direction = ej1x8_gpio_get_direction; + ej1x8->chip.direction_output = ej1x8_gpio_direction_output; + ej1x8->chip.get = ej1x8_gpio_get_value; + ej1x8->chip.set = ej1x8_gpio_set_value; + ej1x8->chip.base = -1; + ej1x8->chip.ngpio = 4; + + err = gpiochip_add_data(&ej1x8->chip, ej1x8); + if (err) { + dev_warn(&pci_dev->dev, + "Failed to register GPIO device: %d\n", err); + pci_dev_put(ej1x8->pci_dev); + kfree(ej1x8); + continue; + } + + list_add(&ej1x8->list_head, &ej1x8_gpios); + } + + return 0; +} + +static void __exit ej1x8_gpio_exit(void) +{ + struct ej1x8_gpio *ej1x8, *tmp; + + list_for_each_entry_safe(ej1x8, tmp, &ej1x8_gpios, list_head) { + gpiochip_remove(&ej1x8->chip); + pci_dev_put(ej1x8->pci_dev); + list_del(&ej1x8->list_head); + kfree(ej1x8); + } +} + +module_init(ej1x8_gpio_init); +module_exit(ej1x8_gpio_exit); + +MODULE_AUTHOR("Martin Blumenstingl "); +MODULE_DESCRIPTION("Etron Technology Inc. EJ168/EJ188/EJ198 GPIO driver"); +MODULE_LICENSE("GPL v2");