diff mbox series

[v5,5/6] gpiolib: Reuse device's fwnode to create IRQ domain

Message ID 20210308194535.66394-6-andriy.shevchenko@linux.intel.com
State Superseded
Headers show
Series gpiolib: switch to fwnode in the core | expand

Commit Message

Andy Shevchenko March 8, 2021, 7:45 p.m. UTC 
When IRQ domain is created for an ACPI case, the name of it becomes unknown-%d
since for now it utilizes of_node member only and doesn't consider fwnode case.
Convert IRQ domain creation code to utilize fwnode instead.

Before/After the change on Intel Galileo Gen 2 with two GPIO (IRQ) controllers:

  unknown-1	==>	\_SB.PCI0.GIP0.GPO
  unknown-2	==>	\_SB.NIO3

Due to the nature of this change we may also deduplicate the WARN():s
because in either case (DT or ACPI) the fwnode will be set correctly
and %pfw is an equivalent to what the current code prints as a prefix.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/gpio/gpiolib.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

Comments

Linus Walleij March 9, 2021, 4:34 p.m. UTC | #1 
On Mon, Mar 8, 2021 at 8:45 PM Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:

> When IRQ domain is created for an ACPI case, the name of it becomes unknown-%d
> since for now it utilizes of_node member only and doesn't consider fwnode case.
> Convert IRQ domain creation code to utilize fwnode instead.
>
> Before/After the change on Intel Galileo Gen 2 with two GPIO (IRQ) controllers:
>
>   unknown-1     ==>     \_SB.PCI0.GIP0.GPO
>   unknown-2     ==>     \_SB.NIO3
>
> Due to the nature of this change we may also deduplicate the WARN():s
> because in either case (DT or ACPI) the fwnode will be set correctly
> and %pfw is an equivalent to what the current code prints as a prefix.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 1853075df741..afee48e7dd41 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1456,9 +1456,9 @@  static int gpiochip_add_irqchip(struct gpio_chip *gc,
 				struct lock_class_key *lock_key,
 				struct lock_class_key *request_key)
 {
+	struct fwnode_handle *fwnode = dev_fwnode(&gc->gpiodev->dev);
 	struct irq_chip *irqchip = gc->irq.chip;
 	const struct irq_domain_ops *ops = NULL;
-	struct device_node *np;
 	unsigned int type;
 	unsigned int i;
 
@@ -1470,7 +1470,6 @@  static int gpiochip_add_irqchip(struct gpio_chip *gc,
 		return -EINVAL;
 	}
 
-	np = gc->gpiodev->dev.of_node;
 	type = gc->irq.default_type;
 
 	/*
@@ -1478,16 +1477,10 @@  static int gpiochip_add_irqchip(struct gpio_chip *gc,
 	 * used to configure the interrupts, as you may end up with
 	 * conflicting triggers. Tell the user, and reset to NONE.
 	 */
-	if (WARN(np && type != IRQ_TYPE_NONE,
-		 "%s: Ignoring %u default trigger\n", np->full_name, type))
+	if (WARN(fwnode && type != IRQ_TYPE_NONE,
+		 "%pfw: Ignoring %u default trigger\n", fwnode, type))
 		type = IRQ_TYPE_NONE;
 
-	if (has_acpi_companion(gc->parent) && type != IRQ_TYPE_NONE) {
-		acpi_handle_warn(ACPI_HANDLE(gc->parent),
-				 "Ignoring %u default trigger\n", type);
-		type = IRQ_TYPE_NONE;
-	}
-
 	if (gc->to_irq)
 		chip_warn(gc, "to_irq is redefined in %s and you shouldn't rely on it\n", __func__);
 
@@ -1508,7 +1501,7 @@  static int gpiochip_add_irqchip(struct gpio_chip *gc,
 
 		if (!ops)
 			ops = &gpiochip_domain_ops;
-		gc->irq.domain = irq_domain_add_simple(np,
+		gc->irq.domain = irq_domain_create_simple(fwnode,
 			gc->ngpio,
 			gc->irq.first,
 			ops, gc);