@@ -145,7 +145,7 @@ requested using gpio_request()::
/* export the GPIO to userspace */
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- /* reverse gpio_export() */
+ /* reverse gpiod_export() */
void gpiod_unexport(struct gpio_desc *desc);
/* create a sysfs link to an exported GPIO node */
@@ -717,36 +717,6 @@ gpiochip nodes (possibly in conjunction with schematics) to determine
the correct GPIO number to use for a given signal.
-Exporting from Kernel code
---------------------------
-Kernel code can explicitly manage exports of GPIOs which have already been
-requested using gpio_request()::
-
- /* export the GPIO to userspace */
- int gpio_export(unsigned gpio, bool direction_may_change);
-
- /* reverse gpio_export() */
- void gpio_unexport();
-
- /* create a sysfs link to an exported GPIO node */
- int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-
-After a kernel driver requests a GPIO, it may only be made available in
-the sysfs interface by gpio_export(). The driver can control whether the
-signal direction may change. This helps drivers prevent userspace code
-from accidentally clobbering important system state.
-
-This explicit exporting can help with debugging (by making some kinds
-of experiments easier), or can provide an always-there interface that's
-suitable for documenting as part of a board support package.
-
-After the GPIO has been exported, gpio_export_link() allows creating
-symlinks from elsewhere in sysfs to the GPIO sysfs node. Drivers can
-use this to provide the interface under their own device in sysfs with
-a descriptive name.
-
-
API Reference
=============
@@ -622,29 +622,3 @@ GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO
固定的,例如在扩展卡上的 GPIO会根据所使用的主板或所在堆叠架构中其他的板子而
有所不同。在这种情况下,你可能需要使用 gpiochip 节点(尽可能地结合电路图)来
确定给定信号所用的 GPIO 编号。
-
-
-从内核代码中导出
--------------
-内核代码可以明确地管理那些已通过 gpio_request()申请的 GPIO 的导出:
-
- /* 导出 GPIO 到用户空间 */
- int gpio_export(unsigned gpio, bool direction_may_change);
-
- /* gpio_export()的逆操作 */
- void gpio_unexport();
-
- /* 创建一个 sysfs 连接到已导出的 GPIO 节点 */
- int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-
-在一个内核驱动申请一个 GPIO 之后，它可以通过 gpio_export()使其在 sysfs
-接口中可见。该驱动可以控制信号方向是否可修改。这有助于防止用户空间代码无意间
-破坏重要的系统状态。
-
-这个明确的导出有助于(通过使某些实验更容易来)调试，也可以提供一个始终存在的接口，
-与文档配合作为板级支持包的一部分。
-
-在 GPIO 被导出之后，gpio_export_link()允许在 sysfs 文件系统的任何地方
-创建一个到这个 GPIO sysfs 节点的符号链接。这样驱动就可以通过一个描述性的
-名字，在 sysfs 中他们所拥有的设备下提供一个(到这个 GPIO sysfs 节点的)接口。
@@ -622,30 +622,3 @@ GPIO 控制器的路徑類似 /sys/class/gpio/gpiochip42/ (對於從#42 GPIO
固定的,例如在擴展卡上的 GPIO會根據所使用的主板或所在堆疊架構中其他的板子而
有所不同。在這種情況下,你可能需要使用 gpiochip 節點(儘可能地結合電路圖)來
確定給定信號所用的 GPIO 編號。
-
-
-從內核代碼中導出
--------------
-內核代碼可以明確地管理那些已通過 gpio_request()申請的 GPIO 的導出:
-
- /* 導出 GPIO 到用戶空間 */
- int gpio_export(unsigned gpio, bool direction_may_change);
-
- /* gpio_export()的逆操作 */
- void gpio_unexport();
-
- /* 創建一個 sysfs 連接到已導出的 GPIO 節點 */
- int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-
-在一個內核驅動申請一個 GPIO 之後，它可以通過 gpio_export()使其在 sysfs
-接口中可見。該驅動可以控制信號方向是否可修改。這有助於防止用戶空間代碼無意間
-破壞重要的系統狀態。
-
-這個明確的導出有助於(通過使某些實驗更容易來)調試，也可以提供一個始終存在的接口，
-與文檔配合作爲板級支持包的一部分。
-
-在 GPIO 被導出之後，gpio_export_link()允許在 sysfs 文件系統的任何地方
-創建一個到這個 GPIO sysfs 節點的符號連結。這樣驅動就可以通過一個描述性的
-名字，在 sysfs 中他們所擁有的設備下提供一個(到這個 GPIO sysfs 節點的)接口。
-
@@ -19,7 +19,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/leds.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/property.h>
@@ -249,7 +249,7 @@ static int evm_led_teardown(struct i2c_client *client, int gpio,
return 0;
}
-static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+static struct gpio_desc *evm_sw_gpio[4];
static int evm_sw_setup(struct i2c_client *client, int gpio,
unsigned ngpio, void *c)
@@ -259,17 +259,19 @@ static int evm_sw_setup(struct i2c_client *client, int gpio,
char label[10];
for (i = 0; i < 4; ++i) {
+ struct gpio_desc *desc = gpio_to_desc(gpio + i);
+
snprintf(label, 10, "user_sw%d", i);
- status = gpio_request(gpio, label);
+ status = gpio_request(gpio + i, label);
if (status)
goto out_free;
- evm_sw_gpio[i] = gpio++;
+ evm_sw_gpio[i] = desc;
- status = gpio_direction_input(evm_sw_gpio[i]);
+ status = gpiod_direction_input(desc);
if (status)
goto out_free;
- status = gpio_export(evm_sw_gpio[i], 0);
+ status = gpiod_export(desc, 0);
if (status)
goto out_free;
}
@@ -277,9 +279,9 @@ static int evm_sw_setup(struct i2c_client *client, int gpio,
out_free:
for (i = 0; i < 4; ++i) {
- if (evm_sw_gpio[i] != -EINVAL) {
- gpio_free(evm_sw_gpio[i]);
- evm_sw_gpio[i] = -EINVAL;
+ if (evm_sw_gpio[i]) {
+ gpio_free(pin + i);
+ evm_sw_gpio[i] = NULL;
}
}
return status;
@@ -291,10 +293,10 @@ static int evm_sw_teardown(struct i2c_client *client, int gpio,
int i;
for (i = 0; i < 4; ++i) {
- if (evm_sw_gpio[i] != -EINVAL) {
- gpio_unexport(evm_sw_gpio[i]);
- gpio_free(evm_sw_gpio[i]);
- evm_sw_gpio[i] = -EINVAL;
+ if (evm_sw_gpio[i]) {
+ gpiod_unexport(evm_sw_gpio[i]);
+ gpio_free(gpio + i);
+ evm_sw_gpio[i] = NULL;
}
}
return 0;
@@ -6,6 +6,7 @@
*/
#include <linux/clk.h>
#include <linux/davinci_emac.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -120,7 +121,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
if (res)
return res;
- gpio_export(gpio, 0);
+ gpiod_export(gpio_to_desc(gpio), 0);
return 0;
}
@@ -135,7 +136,7 @@ static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
return;
}
- gpio_export(gpio, 0);
+ gpiod_export(gpio_to_desc(gpio), 0);
udelay(10);
gpio_set_value(gpio, 1);
@@ -212,8 +213,8 @@ static void __init omap3_sbc_t3517_wifi_init(void)
return;
}
- gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
- gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
+ gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0);
+ gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0);
msleep(100);
gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -411,16 +412,16 @@ static int __init ap325rxa_devices_setup(void)
/* LD3 and LD4 LEDs */
gpio_request(GPIO_PTX5, NULL); /* RUN */
gpio_direction_output(GPIO_PTX5, 1);
- gpio_export(GPIO_PTX5, 0);
+ gpiod_export(gpio_to_desc(GPIO_PTX5), 0);
gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
gpio_direction_output(GPIO_PTX4, 0);
- gpio_export(GPIO_PTX4, 0);
+ gpiod_export(gpio_to_desc(GPIO_PTX4), 0);
/* SW1 input */
gpio_request(GPIO_PTF7, NULL); /* MODE */
gpio_direction_input(GPIO_PTF7);
- gpio_export(GPIO_PTF7, 0);
+ gpiod_export(gpio_to_desc(GPIO_PTF7), 0);
/* LCDC */
gpio_request(GPIO_FN_LCDD15, NULL);
@@ -511,7 +511,7 @@ static ssize_t unexport_store(struct class *class,
goto done;
desc = gpio_to_desc(gpio);
- /* reject bogus commands (gpio_unexport ignores them) */
+ /* reject bogus commands (gpiod_unexport ignores them) */
if (!desc) {
pr_warn("%s: invalid GPIO %ld\n", __func__, gpio);
return -EINVAL;
@@ -814,7 +814,7 @@ static int __init gpiolib_sysfs_init(void)
* early (e.g. before the class_register above was called).
*
* We run before arch_initcall() so chip->dev nodes can have
- * registered, and so arch_initcall() can always gpio_export().
+ * registered, and so arch_initcall() can always gpiod_export().
*/
spin_lock_irqsave(&gpio_lock, flags);
list_for_each_entry(gdev, &gpio_devices, list) {
@@ -10,6 +10,7 @@
*/
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/slab.h>
@@ -755,7 +756,7 @@ static int noon010_probe(struct i2c_client *client,
goto np_err;
}
info->gpio_nreset = pdata->gpio_nreset;
- gpio_export(info->gpio_nreset, 0);
+ gpiod_export(gpio_to_desc(info->gpio_nreset), 0);
}
if (gpio_is_valid(pdata->gpio_nstby)) {
@@ -767,7 +768,7 @@ static int noon010_probe(struct i2c_client *client,
goto np_err;
}
info->gpio_nstby = pdata->gpio_nstby;
- gpio_export(info->gpio_nstby, 0);
+ gpiod_export(gpio_to_desc(info->gpio_nstby), 0);
}
for (i = 0; i < NOON010_NUM_SUPPLIES; i++)
@@ -1426,9 +1426,9 @@ static int ov965x_configure_gpios_pdata(struct ov965x *ov965x,
return ret;
v4l2_dbg(1, debug, &ov965x->sd, "set gpio %d to 1\n", gpio);
- gpio_set_value_cansleep(gpio, 1);
- gpio_export(gpio, 0);
ov965x->gpios[i] = gpio_to_desc(gpio);
+ gpiod_set_value_cansleep(ov965x->gpios[i], 1);
+ gpiod_export(ov965x->gpios[i], 0);
}
return 0;
@@ -15,6 +15,7 @@
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/module.h>
@@ -852,7 +853,7 @@ static int s5k4ecgx_config_gpio(int nr, int val, const char *name)
return 0;
ret = gpio_request_one(nr, flags, name);
if (!ret)
- gpio_export(nr, 0);
+ gpiod_export(gpio_to_desc(nr), 0);
return ret;
}
@@ -18,6 +18,7 @@
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/delay.h>
@@ -893,6 +894,7 @@ static int sta2x11_vip_init_controls(struct sta2x11_vip *vip)
static int vip_gpio_reserve(struct device *dev, int pin, int dir,
const char *name)
{
+ struct gpio_desc *desc = gpio_to_desc(pin);
int ret = -ENODEV;
if (!gpio_is_valid(pin))
@@ -904,7 +906,7 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
return ret;
}
- ret = gpio_direction_output(pin, dir);
+ ret = gpiod_direction_output(desc, dir);
if (ret) {
dev_err(dev, "Failed to set direction for pin %d (%s)\n",
pin, name);
@@ -912,7 +914,7 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
return ret;
}
- ret = gpio_export(pin, false);
+ ret = gpiod_export(desc, false);
if (ret) {
dev_err(dev, "Failed to export pin %d (%s)\n", pin, name);
gpio_free(pin);
@@ -932,8 +934,10 @@ static int vip_gpio_reserve(struct device *dev, int pin, int dir,
static void vip_gpio_release(struct device *dev, int pin, const char *name)
{
if (gpio_is_valid(pin)) {
+ struct gpio_desc *desc = gpio_to_desc(pin);
+
dev_dbg(dev, "releasing pin %d (%s)\n", pin, name);
- gpio_unexport(pin);
+ gpiod_unexport(desc);
gpio_free(pin);
}
}
@@ -11,6 +11,7 @@
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/leds.h>
@@ -329,7 +330,7 @@ static int add_children(struct i2c_client *client)
gpio_request_one(gpio, GPIOF_IN, config_inputs[i].label);
/* make it easy for userspace to see these */
- gpio_export(gpio, false);
+ gpiod_export(gpio_to_desc(gpio), false);
}
/* MMC/SD inputs -- right after the last config input */
@@ -51,6 +51,7 @@
#include <linux/clk-provider.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/gpio.h>
#include <linux/ieee802154.h>
#include <linux/io.h>
@@ -2895,7 +2896,7 @@ static int ca8210_interrupt_init(struct spi_device *spi)
);
if (ret) {
dev_crit(&spi->dev, "request_irq %d failed\n", pdata->irq_id);
- gpio_unexport(pdata->gpio_irq);
+ gpiod_unexport(gpio_to_desc(pdata->gpio_irq));
gpio_free(pdata->gpio_irq);
}
@@ -144,26 +144,6 @@ extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *labe
extern int gpio_request_array(const struct gpio *array, size_t num);
extern void gpio_free_array(const struct gpio *array, size_t num);
-/*
- * A sysfs interface can be exported by individual drivers if they want,
- * but more typically is configured entirely from userspace.
- */
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
-}
-
-static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-{
- return gpiod_export_link(dev, name, gpio_to_desc(gpio));
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
- gpiod_unexport(gpio_to_desc(gpio));
-}
-
/* CONFIG_GPIOLIB: bindings for managed devices that want to request gpios */
struct device;
@@ -253,27 +233,6 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value)
WARN_ON(1);
}
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
- /* GPIO can never have been requested or set as {in,out}put */
- WARN_ON(1);
- return -EINVAL;
-}
-
-static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
-{
- /* GPIO can never have been exported */
- WARN_ON(1);
- return -EINVAL;
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
- /* GPIO can never have been exported */
- WARN_ON(1);
-}
-
static inline int gpio_to_irq(unsigned gpio)
{
/* GPIO can never have been requested or set as input */