From patchwork Tue Apr 4 16:48:26 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Devi Priya X-Patchwork-Id: 670205 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AC57FC6FD1D for ; Tue, 4 Apr 2023 16:50:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234267AbjDDQul (ORCPT ); Tue, 4 Apr 2023 12:50:41 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57876 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235208AbjDDQu2 (ORCPT ); Tue, 4 Apr 2023 12:50:28 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 958735246; Tue, 4 Apr 2023 09:50:07 -0700 (PDT) Received: from pps.filterd (m0279868.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 334C6890020922; Tue, 4 Apr 2023 16:49:56 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=qcppdkim1; bh=EMVbhRAoVjpqre5uULgNKP9VoYtsopaS2kYR4Jnjd6Y=; b=PCPew5/NWwXNv5OC/wL18nDmCO0AM04qlDhLA8e3uHZSTXXi5OUe/xpag1uJ9+a5vdGS 5yIvVP4jRBygSXO73/oo2/CAhD2+Rr8kFE8/ifEqIDrvV5u5CWCZwwJF3DAnQDZlVzov lIr2og+0X5+DgFYtPoJLRDZ72uizROQefqcCreByhYymO2mYizEFg5K0qnNQPSvo2rhK +BZj9ppDBxDGl660Fs8XEW7nJ5Gi1iJIeUz51X+FpK8csE9zjlRnC0M+dvVA+P29KUpj JzSnQvmvLVnK2Pei5JPmyFvkT9BhkuwQZWK3CutWFE4PMZGZAxi1Esu782BIBkaq15Mn 9A== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3prg9bhb9w-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 04 Apr 2023 16:49:56 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 334Gns1o015560 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 4 Apr 2023 16:49:54 GMT Received: from devipriy-linux.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Tue, 4 Apr 2023 09:49:45 -0700 From: Devi Priya To: , , , , , , , , , , , , , , , , , , , , , CC: , , , , , , Subject: [PATCH V2 7/9] arm64: dts: qcom: ipq9574: Add PCIe PHYs and controller nodes Date: Tue, 4 Apr 2023 22:18:26 +0530 Message-ID: <20230404164828.8031-8-quic_devipriy@quicinc.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230404164828.8031-1-quic_devipriy@quicinc.com> References: <20230404164828.8031-1-quic_devipriy@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 7hduGm4F1uS41OtqrU7IBnbyy9w0RS0i X-Proofpoint-ORIG-GUID: 7hduGm4F1uS41OtqrU7IBnbyy9w0RS0i X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-04-04_08,2023-04-04_05,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 clxscore=1015 lowpriorityscore=0 mlxlogscore=999 priorityscore=1501 impostorscore=0 bulkscore=0 mlxscore=0 malwarescore=0 spamscore=0 suspectscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2304040155 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Add PCIe0, PCIe1, PCIe2, PCIe3 (and corresponding PHY) devices found on IPQ9574 platform. The PCIe0 & PCIe1 are 1-lane Gen3 host whereas PCIe2 & PCIe3 are 2-lane Gen3 host. Co-developed-by: Anusha Rao Signed-off-by: Anusha Rao Signed-off-by: Devi Priya --- Changes in V2: - Dropped the usb3phy and PCIe pipe clock nodes and added the pcie_phy phandles directly to the gcc node - Updated the ranges and encoded them in a single lane - Wrapped up the interrupts in a single line - Dropped the child node from PCIe PHY and updated it accordingly to adopt the latest design - Dropped the aggr_noc regions as they will be handled using interconnect driver - Sorted the includes alphabetically arch/arm64/boot/dts/qcom/ipq9574.dtsi | 375 +++++++++++++++++++++++++- 1 file changed, 370 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 27c717932b1a..068c3950dcec 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -6,8 +6,8 @@ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. */ -#include #include +#include #include / { @@ -116,6 +116,58 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + pcie0_phy: phy@84000 { + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; + reg = <0x00084000 0x1000>; + + clocks = <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_ANOC_PCIE0_1LANE_M_CLK>, + <&gcc GCC_SNOC_PCIE0_1LANE_S_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie0_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + + }; + + pcie2_phy: phy@8c000 { + compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy"; + reg = <0x0008c000 0x2000>; + + clocks = <&gcc GCC_PCIE2_AUX_CLK>, + <&gcc GCC_PCIE2_AHB_CLK>, + <&gcc GCC_ANOC_PCIE2_2LANE_M_CLK>, + <&gcc GCC_SNOC_PCIE2_2LANE_S_CLK>, + <&gcc GCC_PCIE2_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE2_PHY_BCR>, + <&gcc GCC_PCIE2PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie2_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -123,6 +175,58 @@ clock-names = "core"; }; + pcie3_phy: phy@f4000 { + compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy"; + reg = <0x000f4000 0x2000>; + + clocks = <&gcc GCC_PCIE3_AUX_CLK>, + <&gcc GCC_PCIE3_AHB_CLK>, + <&gcc GCC_ANOC_PCIE3_2LANE_M_CLK>, + <&gcc GCC_SNOC_PCIE3_2LANE_S_CLK>, + <&gcc GCC_PCIE3_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE3_PHY_BCR>, + <&gcc GCC_PCIE3PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie3_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + + }; + + pcie1_phy: phy@fc000 { + compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy"; + reg = <0x000fc000 0x1000>; + + clocks = <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_ANOC_PCIE1_1LANE_M_CLK>, + <&gcc GCC_SNOC_PCIE1_1LANE_S_CLK>, + <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "anoc_lane", "snoc_lane", "pipe"; + + assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>; + assigned-clock-rates = <20000000>; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <0>; + clock-output-names = "gcc_pcie1_pipe_clk_src"; + + #phy-cells = <0>; + status = "disabled"; + + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq9574-tlmm"; reg = <0x01000000 0x300000>; @@ -146,10 +250,10 @@ reg = <0x01800000 0x80000>; clocks = <&xo_board_clk>, <&sleep_clk>, - <0>, - <0>, - <0>, - <0>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie2_phy>, + <&pcie3_phy>, <0>; #clock-cells = <1>; #reset-cells = <1>; @@ -478,6 +582,267 @@ status = "disabled"; }; }; + + pcie1: pci@10000000 { + compatible = "qcom,pcie-ipq9574"; + reg = <0x10000000 0xf1d>, + <0x10000F20 0xa8>, + <0x10001000 0x1000>, + <0x000F8000 0x4000>, + <0x10100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0 0x00000000 0x10200000 0 0x00100000>, /* downstream I/O */ + <0x02000000 0 0x00000000 0x10300000 0 0x07d00000>; /* non-prefetchable memory */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 35 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 49 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 84 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 85 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interrupts = ; + interrupt-names = "global_irq"; + + /* clocks and clock-names are used to enable the clock in CBCR */ + clocks = <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>, + <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE1_RCHNG_CLK>; + clock-names = "ahb", + "aux", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; + + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_S_ARES>, + <&gcc GCC_PCIE1_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_M_ARES>, + <&gcc GCC_PCIE1_AUX_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + msi-parent = <&v2m0>; + status = "disabled"; + }; + + pcie3: pci@18000000 { + compatible = "qcom,pcie-ipq9574"; + reg = <0x18000000 0xf1d>, + <0x18000F20 0xa8>, + <0x18001000 0x1000>, + <0x000F0000 0x4000>, + <0x18100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <4>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0 0x00000000 0x18200000 0 0x00100000>, /* downstream I/O */ + <0x02000000 0 0x00000000 0x18300000 0 0x07d00000>; /* non-prefetchable memory */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 189 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 190 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 191 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 192 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interrupts = ; + interrupt-names = "global_irq"; + + /* clocks and clock-names are used to enable the clock in CBCR */ + clocks = <&gcc GCC_PCIE3_AHB_CLK>, + <&gcc GCC_PCIE3_AUX_CLK>, + <&gcc GCC_PCIE3_AXI_M_CLK>, + <&gcc GCC_PCIE3_AXI_S_CLK>, + <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE3_RCHNG_CLK>; + clock-names = "ahb", + "aux", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; + + resets = <&gcc GCC_PCIE3_PIPE_ARES>, + <&gcc GCC_PCIE3_CORE_STICKY_ARES>, + <&gcc GCC_PCIE3_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE3_AXI_S_ARES>, + <&gcc GCC_PCIE3_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE3_AXI_M_ARES>, + <&gcc GCC_PCIE3_AUX_ARES>, + <&gcc GCC_PCIE3_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie3_phy>; + phy-names = "pciephy"; + msi-parent = <&v2m0>; + status = "disabled"; + }; + + pcie2: pci@20000000 { + compatible = "qcom,pcie-ipq9574"; + reg = <0x20000000 0xf1d>, + <0x20000F20 0xa8>, + <0x20001000 0x1000>, + <0x00088000 0x4000>, + <0x20100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <3>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0 0x00000000 0x20200000 0 0x00100000>, /* downstream I/O */ + <0x02000000 0 0x00000000 0x20300000 0 0x07d00000>; /* non-prefetchable memory */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 164 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 165 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 186 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 187 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interrupts = ; + interrupt-names = "global_irq"; + + /* clocks and clock-names are used to enable the clock in CBCR */ + clocks = <&gcc GCC_PCIE2_AHB_CLK>, + <&gcc GCC_PCIE2_AUX_CLK>, + <&gcc GCC_PCIE2_AXI_M_CLK>, + <&gcc GCC_PCIE2_AXI_S_CLK>, + <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE2_RCHNG_CLK>; + clock-names = "ahb", + "aux", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; + + resets = <&gcc GCC_PCIE2_PIPE_ARES>, + <&gcc GCC_PCIE2_CORE_STICKY_ARES>, + <&gcc GCC_PCIE2_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE2_AXI_S_ARES>, + <&gcc GCC_PCIE2_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE2_AXI_M_ARES>, + <&gcc GCC_PCIE2_AUX_ARES>, + <&gcc GCC_PCIE2_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie2_phy>; + phy-names = "pciephy"; + msi-parent = <&v2m0>; + status = "disabled"; + }; + + pcie0: pci@28000000 { + compatible = "qcom,pcie-ipq9574"; + reg = <0x28000000 0xf1d>, + <0x28000F20 0xa8>, + <0x28001000 0x1000>, + <0x00080000 0x4000>, + <0x28100000 0x1000>; + reg-names = "dbi", "elbi", "atu", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0 0x00000000 0x28200000 0 0x00100000>, /* downstream I/O */ + <0x02000000 0 0x00000000 0x28300000 0 0x07d00000>; /* non-prefetchable memory */ + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + interrupts = ; + interrupt-names = "global_irq"; + + /* clocks and clock-names are used to enable the clock in CBCR */ + clocks = <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, + <&gcc GCC_PCIE0_RCHNG_CLK>; + clock-names = "ahb", + "aux", + "axi_m", + "axi_s", + "axi_bridge", + "rchng"; + + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_S_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_S_ARES>, + <&gcc GCC_PCIE0_AXI_M_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_M_ARES>, + <&gcc GCC_PCIE0_AUX_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>; + reset-names = "pipe", + "sticky", + "axi_s_sticky", + "axi_s", + "axi_m_sticky", + "axi_m", + "aux", + "ahb"; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + msi-parent = <&v2m0>; + status = "disabled"; + }; + }; timer {