diff mbox series

[v2,4/8] riscv: dts: thead: Add TH1520 GPIO ranges

Message ID 20240103132852.298964-5-emil.renner.berthing@canonical.com
State New
Headers show
Series Add T-Head TH1520 SoC pin control | expand

Commit Message

Emil Renner Berthing Jan. 3, 2024, 1:28 p.m. UTC 
Add gpio-ranges properties to the TH1520 device tree, so user space can
change basic pinconf settings for GPIOs and are not allowed to use pads
already used by other functions.

Adjust number of GPIOs available for the different controllers.

Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
---
 arch/riscv/boot/dts/thead/th1520.dtsi | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index e65a306ff575..5eb841ba5124 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -223,6 +223,7 @@  portc: gpio-controller@0 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				ngpios = <32>;
+				gpio-ranges = <&padctrl0_apsys 0 0 32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -240,7 +241,8 @@  portd: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				ngpios = <32>;
+				ngpios = <23>;
+				gpio-ranges = <&padctrl0_apsys 0 32 23>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -265,6 +267,7 @@  porta: gpio-controller@0 {
 				gpio-controller;
 				#gpio-cells = <2>;
 				ngpios = <32>;
+				gpio-ranges = <&padctrl1_apsys 0 0 32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -282,7 +285,8 @@  portb: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				ngpios = <32>;
+				ngpios = <31>;
+				gpio-ranges = <&padctrl1_apsys 0 32 31>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -424,7 +428,8 @@  porte: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				ngpios = <32>;
+				ngpios = <16>;
+				gpio-ranges = <&padctrl_aosys 0 9 16>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -448,7 +453,8 @@  portf: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				ngpios = <32>;
+				ngpios = <23>;
+				gpio-ranges = <&padctrl_aosys 0 25 22>, <&padctrl_aosys 22 7 1>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;