diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
index e177815bf1a2..f51aeeb9fd3b 100644
--- a/arch/riscv/boot/dts/microchip/Makefile
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb
 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi
new file mode 100644
index 000000000000..0abd0dc540be
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire-fabric.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/ {
+	fabric_clk3: fabric-clk3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	fabric_clk1: fabric-clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	fabric-bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>, /* FIC3-FAB */
+			 <0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>, /* FIC0, LO */
+			 <0x0 0xe0000000 0x0 0xe0000000 0x0 0x20000000>, /* FIC1, LO */
+			 <0x20 0x0 0x20 0x0 0x10 0x0>, /* FIC0,HI */
+			 <0x30 0x0 0x30 0x0 0x10 0x0>; /* FIC1,HI */
+
+		cape_gpios_p8: gpio@41100000 {
+			compatible = "microchip,coregpio-rtl-v3";
+			reg = <0x0 0x41100000 0x0 0x1000>;
+			clocks = <&fabric_clk3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <16>;
+			gpio-line-names = "P8_PIN31", "P8_PIN32", "P8_PIN33", "P8_PIN34",
+					  "P8_PIN35", "P8_PIN36", "P8_PIN37", "P8_PIN38",
+					  "P8_PIN39", "P8_PIN40", "P8_PIN41", "P8_PIN42",
+					  "P8_PIN43", "P8_PIN44", "P8_PIN45", "P8_PIN46";
+		};
+
+		cape_gpios_p9: gpio@41200000 {
+			compatible = "microchip,coregpio-rtl-v3";
+			reg = <0x0 0x41200000 0x0 0x1000>;
+			clocks = <&fabric_clk3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <20>;
+			gpio-line-names = "P9_PIN11", "P9_PIN12", "P9_PIN13", "P9_PIN14",
+					  "P9_PIN15", "P9_PIN16", "P9_PIN17", "P9_PIN18",
+					  "P9_PIN21", "P9_PIN22", "P9_PIN23", "P9_PIN24",
+					  "P9_PIN25", "P9_PIN26", "P9_PIN27", "P9_PIN28",
+					  "P9_PIN29", "P9_PIN31", "P9_PIN41", "P9_PIN42";
+		};
+
+		hsi_gpios: gpio@44000000 {
+			compatible = "microchip,coregpio-rtl-v3";
+			reg = <0x0 0x44000000 0x0 0x1000>;
+			clocks = <&fabric_clk3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <20>;
+			gpio-line-names = "B0_HSIO70N", "B0_HSIO71N", "B0_HSIO83N",
+					  "B0_HSIO73N_C2P_CLKN", "B0_HSIO70P", "B0_HSIO71P",
+					  "B0_HSIO83P", "B0_HSIO73N_C2P_CLKP", "XCVR1_RX_VALID",
+					  "XCVR1_LOCK", "XCVR1_ERROR", "XCVR2_RX_VALID",
+					  "XCVR2_LOCK", "XCVR2_ERROR", "XCVR3_RX_VALID",
+					  "XCVR3_LOCK", "XCVR3_ERROR", "XCVR_0B_REF_CLK_PLL_LOCK",
+					  "XCVR_0C_REF_CLK_PLL_LOCK", "B0_HSIO81N";
+		};
+	};
+
+	fabric-pcie-bus@3000000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x40000000 0x0 0x40000000 0x0 0x20000000>,
+			 <0x30 0x0 0x30 0x0 0x10 0x0>;
+
+		pcie: pcie@3000000000 {
+			compatible = "microchip,pcie-host-1.0";
+			#address-cells = <0x3>;
+			#interrupt-cells = <0x1>;
+			#size-cells = <0x2>;
+			device_type = "pci";
+			reg = <0x30 0x0 0x0 0x8000000>,
+			      <0x0 0x43000000 0x0 0x10000>;
+			reg-names = "cfg", "apb";
+			bus-range = <0x0 0x7f>;
+			interrupt-parent = <&plic>;
+			interrupts = <119>;
+			interrupt-map = <0 0 0 1 &pcie_intc 0>,
+					<0 0 0 2 &pcie_intc 1>,
+					<0 0 0 3 &pcie_intc 2>,
+					<0 0 0 4 &pcie_intc 3>;
+			interrupt-map-mask = <0 0 0 7>;
+			clocks = <&ccc_nw CLK_CCC_PLL0_OUT1>,
+				 <&ccc_nw CLK_CCC_PLL0_OUT3>;
+			clock-names = "fic1", "fic3";
+			ranges = <0x43000000 0x0 0x9000000 0x30 0x9000000 0x0 0xf000000>,
+				 <0x1000000 0x0 0x8000000 0x30 0x8000000 0x0 0x1000000>,
+				 <0x3000000 0x0 0x18000000 0x30 0x18000000 0x0 0x70000000>;
+			msi-parent = <&pcie>;
+			msi-controller;
+			status = "disabled";
+
+			pcie_intc: interrupt-controller {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+	};
+
+	refclk_ccc: cccrefclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
+
+&ccc_nw {
+	clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+		 <&refclk_ccc>, <&refclk_ccc>;
+	clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+		      "dll0_ref", "dll1_ref";
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
new file mode 100644
index 000000000000..47cf693beb68
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2021 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "mpfs.dtsi"
+#include "mpfs-beaglev-fire-fabric.dtsi"
+
+/* Clock frequency (in Hz) of MTIMER */
+#define MTIMER_FREQ		1000000
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "BeagleBoard BeagleV-Fire";
+	compatible = "beagle,beaglev-fire", "microchip,mpfs";
+
+	aliases {
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		timebase-frequency = <MTIMER_FREQ>;
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+		status = "okay";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hss: hss-buffer@103fc00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10 0x3fc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+
+	imx219_clk: camera-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	imx219_vana: fixedregulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx219_vana";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	imx219_vdig: fixedregulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx219_vdig";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	imx219_vddl: fixedregulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "imx219_vddl";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+};
+
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	ngpios=<32>;
+	gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2",
+			  "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5",
+			  "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8",
+			  "P8_PIN12_USER_LED_9", "P8_PIN13_USER_LED_10", "P8_PIN14_USER_LED_11",
+			  "P8_PIN15", "P8_PIN16", "P8_PIN17", "P8_PIN18", "P8_PIN19", "P8_PIN20",
+			  "P8_PIN21", "P8_PIN22", "P8_PIN23", "P8_PIN24", "P8_PIN25", "P8_PIN26",
+			  "P8_PIN27", "P8_PIN28", "P8_PIN29", "P8_PIN30", "M2_W_DISABLE1",
+			  "M2_W_DISABLE2", "VIO_ENABLE", "SD_DET";
+	status = "okay";
+
+	vio-enable-hog {
+		gpio-hog;
+		gpios = <30 30>;
+		output-high;
+		line-name = "VIO_ENABLE";
+	};
+
+	sd-det-hog {
+		gpio-hog;
+		gpios = <31 31>;
+		input;
+		line-name = "SD_DET";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&imx219_clk>;
+		VANA-supply = <&imx219_vana>;   /* 2.8v */
+		VDIG-supply = <&imx219_vdig>;   /* 1.8v */
+		VDDL-supply = <&imx219_vddl>;   /* 1.2v */
+
+		port {
+			imx219_0: endpoint {
+				data-lanes = <1 2>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&mmuart0 {
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+	clock-frequency = <50000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	microchip,bitstream-flash = <&sys_ctrl_flash>;
+	status = "okay";
+};
+
+&syscontroller_qspi {
+	status = "okay";
+
+	sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
