diff mbox series

[v3,3/9] Revert "dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings"

Message ID 20240620-mbly-olb-v3-3-5f29f8ca289c@bootlin.com
State Superseded
Headers show
Series [v3,1/9] Revert "dt-bindings: clock: mobileye,eyeq5-clk: add bindings" | expand

Commit Message

Théo Lebrun June 20, 2024, 5:30 p.m. UTC 
Switch from one sub-node per functionality in the system-controller to a
single node representing the entire OLB instance. This is the
recommended approach for controllers handling many different
functionalities; it is a single controller and should be represented by
a single devicetree node.

The pinctrl bindings is removed and all properties will be described by:
soc/mobileye/mobileye,eyeq5-olb.yaml

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 .../bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml   | 242 ---------------------
 1 file changed, 242 deletions(-)

Comments

Linus Walleij June 26, 2024, 11:53 a.m. UTC | #1 
On Thu, Jun 20, 2024 at 7:31 PM Théo Lebrun <theo.lebrun@bootlin.com> wrote:

> Switch from one sub-node per functionality in the system-controller to a
> single node representing the entire OLB instance. This is the
> recommended approach for controllers handling many different
> functionalities; it is a single controller and should be represented by
> a single devicetree node.
>
> The pinctrl bindings is removed and all properties will be described by:
> soc/mobileye/mobileye,eyeq5-olb.yaml
>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
deleted file mode 100644
index 5f00604bf48c..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/mobileye,eyeq5-pinctrl.yaml
+++ /dev/null
@@ -1,242 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/mobileye,eyeq5-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mobileye EyeQ5 pin controller
-
-description: >
-  The EyeQ5 pin controller handles the two pin banks of the system. It belongs
-  to a system-controller block called OLB.
-
-  Pin control is about bias (pull-down, pull-up), drive strength and muxing. Pin
-  muxing supports two functions for each pin: first is GPIO, second is
-  pin-dependent.
-
-  Pins and groups are bijective.
-
-maintainers:
-  - Grégory Clement <gregory.clement@bootlin.com>
-  - Théo Lebrun <theo.lebrun@bootlin.com>
-  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
-
-$ref: pinctrl.yaml#
-
-properties:
-  compatible:
-    enum:
-      - mobileye,eyeq5-pinctrl
-
-  reg:
-    maxItems: 1
-
-patternProperties:
-  "-pins?$":
-    type: object
-    description: Pin muxing configuration.
-    $ref: pinmux-node.yaml#
-    additionalProperties: false
-    properties:
-      pins: true
-      function:
-        enum: [gpio,
-               # Bank A
-               timer0, timer1, timer2, timer5, uart0, uart1, can0, can1, spi0,
-               spi1, refclk0,
-               # Bank B
-               timer3, timer4, timer6, uart2, can2, spi2, spi3, mclk0]
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-    required:
-      - pins
-      - function
-    allOf:
-      - if:
-          properties:
-            function:
-              const: gpio
-        then:
-          properties:
-            pins:
-              items: # PA0 - PA28, PB0 - PB22
-                pattern: '^(P(A|B)1?[0-9]|PA2[0-8]|PB2[0-2])$'
-      - if:
-          properties:
-            function:
-              const: timer0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA0, PA1]
-      - if:
-          properties:
-            function:
-              const: timer1
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA2, PA3]
-      - if:
-          properties:
-            function:
-              const: timer2
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA4, PA5]
-      - if:
-          properties:
-            function:
-              const: timer5
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA6, PA7, PA8, PA9]
-      - if:
-          properties:
-            function:
-              const: uart0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA10, PA11]
-      - if:
-          properties:
-            function:
-              const: uart1
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA12, PA13]
-      - if:
-          properties:
-            function:
-              const: can0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA14, PA15]
-      - if:
-          properties:
-            function:
-              const: can1
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA16, PA17]
-      - if:
-          properties:
-            function:
-              const: spi0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA18, PA19, PA20, PA21, PA22]
-      - if:
-          properties:
-            function:
-              const: spi1
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA23, PA24, PA25, PA26, PA27]
-      - if:
-          properties:
-            function:
-              const: refclk0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PA28]
-      - if:
-          properties:
-            function:
-              const: timer3
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB0, PB1]
-      - if:
-          properties:
-            function:
-              const: timer4
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB2, PB3]
-      - if:
-          properties:
-            function:
-              const: timer6
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB4, PB5, PB6, PB7]
-      - if:
-          properties:
-            function:
-              const: uart2
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB8, PB9]
-      - if:
-          properties:
-            function:
-              const: can2
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB10, PB11]
-      - if:
-          properties:
-            function:
-              const: spi2
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB12, PB13, PB14, PB15, PB16]
-      - if:
-          properties:
-            function:
-              const: spi3
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB17, PB18, PB19, PB20, PB21]
-      - if:
-          properties:
-            function:
-              const: mclk0
-        then:
-          properties:
-            pins:
-              items:
-                enum: [PB22]
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false