new file mode 100755
@@ -0,0 +1,1443 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# SPDX-FileCopyrightText: 2023-2024 Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+#
+# Test cases for gpiocli utility. This test-suite assumes that gpio-manager
+# is already running.
+#
+
+SOURCE_DIR="$(dirname "${BASH_SOURCE[0]}")"
+
+wait_for_sim() {
+ COUNTER=100
+
+ while true
+ do
+ gdbus call --system --dest io.gpiod1 \
+ --object-path /io/gpiod1/chips/"$1" \
+ --method org.freedesktop.DBus.Peer.Ping > /dev/null 2>&1 && break
+ sleep 0.01
+ COUNTER=$($COUNTER - 1)
+ if [ "$COUNTER" -eq 0 ]
+ then
+ fail "error waiting for the GPIO sim chip to be exported on the bus"
+ return 1
+ fi
+ done
+}
+
+# Create a simulated GPIO chip and wait until it's exported by the gpio-manager.
+gpiosim_chip_dbus() {
+ gpiosim_chip "$@"
+ wait_for_sim "${GPIOSIM_CHIP_NAME[$1]}"
+}
+
+gpiodbus_release_request() {
+ run_prog gpiocli release "$1"
+ status_is 0
+}
+
+gpiodbus_check_request() {
+ run_prog gpiocli requests
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$1"
+}
+
+#
+# gpiocli wait test cases
+#
+
+test_wait_for_manager() {
+ run_prog gpiocli wait
+ status_is 0
+ num_lines_is 0
+}
+
+test_wait_for_chip() {
+ dut_run gpiocli wait --chip=foobar
+ sleep 0.01
+
+ gpiosim_chip_dbus sim0 label=foobar
+ dut_flush
+ dut_read
+
+ status_is 0
+ num_lines_is 0
+}
+
+test_wait_timeout() {
+ run_prog gpiocli wait --chip=foobar --timeout=100ms
+ status_is 1
+ num_lines_is 1
+ output_regex_match ".*: wait timed out!"
+}
+
+#
+# gpiocli detect test cases
+#
+
+test_detect_all_chips() {
+ gpiosim_chip_dbus sim0 num_lines=4
+ gpiosim_chip_dbus sim1 num_lines=8
+ gpiosim_chip_dbus sim2 num_lines=16
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+ local sim1=${GPIOSIM_CHIP_NAME[sim1]}
+ local sim2=${GPIOSIM_CHIP_NAME[sim2]}
+ local sim0dev=${GPIOSIM_DEV_NAME[sim0]}
+ local sim1dev=${GPIOSIM_DEV_NAME[sim1]}
+ local sim2dev=${GPIOSIM_DEV_NAME[sim2]}
+
+ run_prog gpiocli detect
+
+ status_is 0
+ output_regex_match "$sim0 \[${sim0dev}[-:]node0\] \(4 lines\)"
+ output_regex_match "$sim1 \[${sim1dev}[-:]node0\] \(8 lines\)"
+ output_regex_match "$sim2 \[${sim2dev}[-:]node0\] \(16 lines\)"
+
+ # ignoring symlinks
+ local initial_output=$output
+ gpiosim_chip_symlink sim1 /dev
+
+ run_prog gpiocli detect
+
+ status_is 0
+ output_is "$initial_output"
+}
+
+test_detect_one_chip() {
+ gpiosim_chip_dbus sim0 num_lines=4
+ gpiosim_chip_dbus sim1 num_lines=8
+ gpiosim_chip_dbus sim2 num_lines=16
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+ local sim2=${GPIOSIM_CHIP_NAME[sim2]}
+ local sim0dev=${GPIOSIM_DEV_NAME[sim0]}
+ local sim2dev=${GPIOSIM_DEV_NAME[sim2]}
+
+ # by name
+ run_prog gpiocli detect "$sim0"
+
+ status_is 0
+ output_regex_match "$sim0 \[${sim0dev}[-:]node0\] \(4 lines\)"
+ num_lines_is 1
+
+ # by number
+ run_prog gpiocli detect "$(gpiosim_chip_number sim2)"
+
+ status_is 0
+ output_regex_match "$sim2 \[${sim2dev}[-:]node0\] \(16 lines\)"
+ num_lines_is 1
+}
+
+test_detect_multiple_chips() {
+ gpiosim_chip_dbus sim0 num_lines=4
+ gpiosim_chip_dbus sim1 num_lines=8
+ gpiosim_chip_dbus sim2 num_lines=16
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+ local sim1=${GPIOSIM_CHIP_NAME[sim1]}
+ local sim2=${GPIOSIM_CHIP_NAME[sim2]}
+ local sim0dev=${GPIOSIM_DEV_NAME[sim0]}
+ local sim1dev=${GPIOSIM_DEV_NAME[sim1]}
+ local sim2dev=${GPIOSIM_DEV_NAME[sim2]}
+
+ run_prog gpiocli detect "$sim0" "$sim1" "$sim2"
+
+ status_is 0
+ output_regex_match "$sim0 \[${sim0dev}[-:]node0\] \(4 lines\)"
+ output_regex_match "$sim1 \[${sim1dev}[-:]node0\] \(8 lines\)"
+ output_regex_match "$sim2 \[${sim2dev}[-:]node0\] \(16 lines\)"
+ num_lines_is 3
+}
+
+test_detect_with_nonexistent_chip() {
+ run_prog gpiocli detect nonexistent_chip
+
+ status_is 1
+ output_regex_match ".*: No such chip: 'nonexistent_chip'"
+}
+
+#
+# gpiocli info test cases
+#
+
+test_info_all_chips() {
+ gpiosim_chip_dbus sim0 num_lines=4
+ gpiosim_chip_dbus sim1 num_lines=8
+
+ run_prog gpiocli info
+
+ status_is 0
+ output_contains_line "${GPIOSIM_CHIP_NAME[sim0]} - 4 lines:"
+ output_contains_line "${GPIOSIM_CHIP_NAME[sim1]} - 8 lines:"
+ output_regex_match "\\s+line\\s+0:\\s+unnamed\\s+\[input\]"
+ output_regex_match "\\s+line\\s+7:\\s+unnamed\\s+\[input\]"
+}
+
+test_info_one_chip() {
+ gpiosim_chip_dbus sim0 num_lines=4
+ gpiosim_chip_dbus sim1 num_lines=8
+ gpiosim_chip_dbus sim2 num_lines=12
+
+ local sim1=${GPIOSIM_CHIP_NAME[sim1]}
+
+ # by name
+ run_prog gpiocli info -c "$sim1"
+
+ status_is 0
+ output_contains_line "$sim1 - 8 lines:"
+ output_regex_match "\\s+line\\s+2:\\s+unnamed\\s+\[input\]"
+ num_lines_is 9
+
+ # by number
+ run_prog gpiocli info -c "$(gpiosim_chip_number sim1)"
+
+ status_is 0
+ output_contains_line "$sim1 - 8 lines:"
+ output_regex_match "\\s+line\\s+2:\\s+unnamed\\s+\[input\]"
+ num_lines_is 9
+}
+
+test_info_one_line_by_name() {
+ gpiosim_chip_dbus sim0 num_lines=8 line_name=3:foo line_name=5:bar
+ gpiosim_chip_dbus sim1 num_lines=8 line_name=2:baz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli info bar
+
+ status_is 0
+ output_regex_match "$sim0\\s+5:\\s+\"bar\"\\s+\[input\]"
+ num_lines_is 1
+}
+
+test_info_one_line_by_chip_and_offset() {
+ gpiosim_chip_dbus sim0 num_lines=8
+ gpiosim_chip_dbus sim1 num_lines=8
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli info -c "$sim0" 3
+
+ status_is 0
+ output_regex_match "$sim0\\s+3:\\s+unnamed\\s+\[input\]"
+ num_lines_is 1
+}
+
+test_info_two_lines_by_chip_offset_and_name() {
+ gpiosim_chip_dbus sim0 num_lines=8 line_name=3:foo line_name=5:bar
+ gpiosim_chip_dbus sim1 num_lines=8 line_name=2:baz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli info -c "$sim0" 3 bar
+
+ status_is 0
+ output_regex_match "$sim0\\s+3:\\s+\"foo\"\\s+\[input\]"
+ output_regex_match "$sim0\\s+5:\\s+\"bar\"\\s+\[input\]"
+ num_lines_is 2
+}
+
+test_info_two_lines() {
+ gpiosim_chip_dbus sim0 num_lines=8 line_name=3:foo line_name=5:bar
+ gpiosim_chip_dbus sim1 num_lines=8 line_name=2:baz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+ local sim1=${GPIOSIM_CHIP_NAME[sim1]}
+
+ run_prog gpiocli info bar baz
+
+ status_is 0
+ output_regex_match "$sim0\\s+5:\\s+\"bar\"\\s+\[input\]"
+ output_regex_match "$sim1\\s+2:\\s+\"baz\"\\s+\[input\]"
+ num_lines_is 2
+}
+
+test_info_repeating_lines() {
+ gpiosim_chip_dbus sim0 num_lines=8 line_name=3:foo line_name=5:bar
+ gpiosim_chip_dbus sim1 num_lines=8 line_name=2:baz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+ local sim1=${GPIOSIM_CHIP_NAME[sim1]}
+
+ run_prog gpiocli info baz bar baz
+
+ status_is 0
+ output_regex_match "$sim1\\s+2:\\s+\"baz\"\\s+\[input\]"
+ output_regex_match "$sim0\\s+5:\\s+\"bar\"\\s+\[input\]"
+ output_regex_match "$sim1\\s+2:\\s+\"baz\"\\s+\[input\]"
+ num_lines_is 3
+}
+
+#
+# gpiocli find test cases
+#
+
+test_map_existing_line() {
+ gpiosim_chip_dbus sim0 num_lines=4 line_name=3:baz
+ gpiosim_chip_dbus sim1 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli find bar
+
+ status_is 0
+ num_lines_is 1
+ output_is "${GPIOSIM_CHIP_NAME[sim1]} 5"
+}
+
+test_map_nonexistent_line() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli find foobar
+
+ status_is 1
+ num_lines_is 1
+ output_regex_match ".*: line 'foobar' not found"
+}
+
+#
+# gpiocli request test cases
+#
+
+test_request_invalid_arguments() {
+ gpiosim_chip_dbus sim0 num_lines=8 line_name=3:foo
+
+ run_prog gpiocli request --input --output foo
+ status_is 1
+ output_regex_match ".*: --input and --output are mutually exclusive"
+
+ run_prog gpiocli request --output --both-edges foo
+ status_is 1
+ output_regex_match ".*: monitoring edges is only possible in input mode"
+
+ run_prog gpiocli request --output --open-source --open-drain foo
+ status_is 1
+ output_regex_match ".*: --push-pull, --open-drain and --open-source are mutually exclusive"
+
+ run_prog gpiocli request --input --open-source foo
+ status_is 1
+ output_regex_match ".*: --push-pull, --open-drain and --open-source are only available in output mode"
+
+ run_prog gpiocli request --input --bias-disabled --pull-down foo
+ status_is 1
+ output_regex_match ".*: --pull-up, --pull-down and --bias-disabled are mutually exclusive"
+
+ run_prog gpiocli request --input --debounce-period=3000 foo
+ status_is 1
+ output_regex_match ".*: --debounce-period can only be used with edge-detection enabled"
+
+ run_prog gpiocli request --input --clock-monotonic foo
+ status_is 1
+ output_regex_match ".*: --clock-monotonic, --clock-realtime and --clock-hte can only be used with edge detection enabled"
+
+ run_prog gpiocli request --input --clock-monotonic --clock-realtime foo
+ status_is 1
+ output_regex_match ".*: --clock-monotonic, --clock-realtime and --clock-hte are mutually exclusive"
+}
+
+test_request_one_line_by_name() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input bar
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiodbus_check_request "$request\\s+\(${GPIOSIM_CHIP_NAME[sim0]}\)\\s+Offsets:\\s+\[5\]"
+ gpiodbus_release_request "$request"
+}
+
+test_request_one_line_by_chip_and_offset() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --chip="$sim0" 4
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiodbus_check_request "$request\\s+\(${GPIOSIM_CHIP_NAME[sim0]}\)\\s+Offsets:\\s+\[4\]"
+ gpiodbus_release_request "$request"
+}
+
+test_request_from_different_chips() {
+ gpiosim_chip_dbus sim0 num_lines=8 line_name=1:foo line_name=5:bar
+ gpiosim_chip_dbus sim1 num_lines=4 line_name=1:xyz
+
+ run_prog gpiocli request --input foo xyz
+ status_is 1
+ output_regex_match ".*: all requested lines must belong to the same chip"
+}
+
+test_multiple_requests() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --chip="$sim0" 0
+ status_is 0
+ num_lines_is 1
+ local request0=$output
+
+ run_prog gpiocli request --output --chip="$sim0" 1 2
+ status_is 0
+ num_lines_is 1
+ local request1=$output
+
+ run_prog gpiocli request --chip="$sim0" 5
+ status_is 0
+ num_lines_is 1
+ local request2=$output
+
+ run_prog gpiocli requests
+ status_is 0
+ num_lines_is 3
+ output_contains_line "$request0 ($sim0) Offsets: [0]"
+ output_contains_line "$request1 ($sim0) Offsets: [1, 2]"
+ output_contains_line "$request2 ($sim0) Offsets: [5]"
+
+ gpiodbus_release_request "$request"0
+ gpiodbus_release_request "$request"1
+ gpiodbus_release_request "$request"2
+}
+
+test_request_multiple_lines_by_names() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo xyz bar
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiodbus_check_request "$request\\s+\(${GPIOSIM_CHIP_NAME[sim0]}\)\\s+Offsets:\\s+\[1, 11, 5\]"
+ gpiodbus_release_request "$request"
+}
+
+test_request_multiple_lines_by_chip_number_by_name_and_offset() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input -c "$(gpiosim_chip_number sim0)" xyz 0 foo 15
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiodbus_check_request "$request\\s+\(${GPIOSIM_CHIP_NAME[sim0]}\)\\s+Offsets:\\s+\[11, 0, 1, 15\]"
+ gpiodbus_release_request "$request"
+}
+
+test_request_with_consumer_name() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --consumer='foobar' foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"foobar\",managed=\"request0\",input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_with_consumer_name_with_whitespaces() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --consumer='foo bar' foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"foo bar\",managed=\"request0\",input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_active_low() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --active-low foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",active-low,input\]"
+
+ run_prog gpiocli get foo
+ status_is 0
+ num_lines_is 1
+ output_is "\"foo\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_pull_up() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --pull-up foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",bias=pull-up,input\]"
+
+ run_prog gpiocli get foo
+ status_is 0
+ num_lines_is 1
+ output_is "\"foo\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_pull_down() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --pull-down foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",bias=pull-down,input\]"
+
+ run_prog gpiocli get foo
+ status_is 0
+ num_lines_is 1
+ output_is "\"foo\"=inactive"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_pull_bias_disabled() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --bias-disabled foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",bias=disabled,input\]"
+
+ run_prog gpiocli get foo
+ status_is 0
+ num_lines_is 1
+ output_is "\"foo\"=inactive"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_drive_push_pull() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --output --push-pull foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",output,push-pull\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_drive_open_drain() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --output --open-drain foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",output,open-drain\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_drive_open_source() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --output --open-source foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",output,open-source\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_edge_falling() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --falling-edge foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",edges=falling,event-clock=monotonic,input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_edge_rising() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --rising-edge foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",edges=rising,event-clock=monotonic,input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_edge_both() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --both-edges foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",edges=both,event-clock=monotonic,input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_edge_falling_and_rising() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --falling-edge --rising-edge foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",edges=both,event-clock=monotonic,input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_edge_with_debounce_period() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --falling-edge --rising-edge --debounce-period=4000 foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",edges=both,event-clock=monotonic,debounce-period=4000,input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_edge_with_realtime_clock() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --falling-edge --rising-edge --clock-realtime foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",edges=both,event-clock=realtime,input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_with_output_values() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz line_name=9:abc
+
+ run_prog gpiocli request --output foo=active bar=inactive xyz=1
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli get -r "$request"
+ status_is 0
+ num_lines_is 1
+ output_regex_match "\"1\"=active \"5\"=inactive \"11\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_request_output_values_input_mode() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo=active bar=inactive xyz=1
+ status_is 1
+ num_lines_is 3
+ output_regex_match ".*: Output values can only be set in output mode"
+}
+
+test_request_output_values_invalid_format() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --output foo=active bar=foobar xyz=1
+ status_is 1
+ num_lines_is 3
+ output_regex_match ".*: invalid output value: 'foobar'"
+}
+
+#
+# gpiocli reconfigure test cases
+#
+
+test_reconfigure_from_output_to_input() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --output foo=active bar=inactive xyz=1
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",output,push-pull\]"
+
+ run_prog gpiocli reconfigure --input "$request"
+ status_is 0
+ num_lines_is 1
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_reconfigure_from_input_to_output_with_values() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",input\]"
+
+ run_prog gpiocli reconfigure --output "$request" 1 0 active
+ status_is 0
+ num_lines_is 1
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",output,push-pull\]"
+
+ run_prog gpiocli get foo bar xyz
+ status_is 0
+ num_lines_is 1
+ output_is "\"foo\"=active \"bar\"=inactive \"xyz\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_reconfigure_fails_with_wrong_number_of_output_values() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli info foo
+ status_is 0
+ num_lines_is 1
+ output_regex_match "$sim0\\s+1:\\s+\"foo\"\\s+\[used,consumer=\"gpio-manager\",managed=\"$request\",input\]"
+
+ run_prog gpiocli reconfigure --output "$request" 1 0
+ status_is 1
+ num_lines_is 3
+ output_regex_match ".*: The number of output values must correspond to the number of lines in the request"
+
+ run_prog gpiocli reconfigure --output "$request" 1 0 1 0
+ status_is 1
+ num_lines_is 3
+
+ gpiodbus_release_request "$request"
+}
+
+#
+# gpiocli release test cases
+#
+
+test_release_nonexistent_request() {
+ run_prog gpiocli release request0
+ status_is 1
+ output_regex_match ".*: No such request: 'request0'"
+}
+
+#
+# gpiocli get test cases
+#
+
+test_get_value_for_unmanaged_line() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli get foo
+ status_is 1
+ num_lines_is 1
+ output_regex_match ".*: Line 'foo' not managed by gpio-manager, must be requested first"
+}
+
+test_get_one_value_by_name() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo bar
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiosim_set_pull sim0 1 pull-up
+
+ run_prog gpiocli get foo
+ status_is 0
+ num_lines_is 1
+ output_is "\"foo\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_get_multiple_values_by_names() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo xyz bar
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiosim_set_pull sim0 1 pull-up
+ gpiosim_set_pull sim0 5 pull-up
+ gpiosim_set_pull sim0 11 pull-down
+
+ run_prog gpiocli get xyz bar foo
+ status_is 0
+ num_lines_is 1
+ output_is "\"xyz\"=inactive \"bar\"=active \"foo\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_get_one_value_by_request_and_offset() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input xyz foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiosim_set_pull sim0 1 pull-up
+
+ run_prog gpiocli get --request="$request" 1
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_get_multiple_values_by_request_and_offsets() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiosim_set_pull sim0 1 pull-up
+ gpiosim_set_pull sim0 5 pull-down
+ gpiosim_set_pull sim0 11 pull-up
+
+ run_prog gpiocli get --request="$request" 11 1 5
+ status_is 0
+ num_lines_is 1
+ output_is "\"11\"=active \"1\"=active \"5\"=inactive"
+
+ gpiodbus_release_request "$request"
+}
+
+test_get_multiple_values_by_request_names_and_offsets() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiosim_set_pull sim0 1 pull-up
+ gpiosim_set_pull sim0 5 pull-down
+ gpiosim_set_pull sim0 11 pull-up
+
+ run_prog gpiocli get --request="$request" xyz 1 5
+ status_is 0
+ num_lines_is 1
+ output_is "\"xyz\"=active \"1\"=active \"5\"=inactive"
+
+ gpiodbus_release_request "$request"
+}
+
+test_get_all_values_for_request() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiosim_set_pull sim0 1 pull-up
+ gpiosim_set_pull sim0 5 pull-down
+ gpiosim_set_pull sim0 11 pull-up
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=active \"5\"=inactive \"11\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_get_unquoted_output() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiosim_set_pull sim0 1 pull-up
+ gpiosim_set_pull sim0 5 pull-down
+ gpiosim_set_pull sim0 11 pull-up
+
+ run_prog gpiocli get --unquoted --request="$request" xyz 1 5
+ status_is 0
+ num_lines_is 1
+ output_is "xyz=active 1=active 5=inactive"
+
+ gpiodbus_release_request "$request"
+}
+
+test_get_numeric_output() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --input foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ gpiosim_set_pull sim0 1 pull-up
+ gpiosim_set_pull sim0 5 pull-down
+ gpiosim_set_pull sim0 11 pull-up
+
+ run_prog gpiocli get --numeric --request="$request" xyz 1 5
+ status_is 0
+ num_lines_is 1
+ output_is "\"xyz\"=1 \"1\"=1 \"5\"=0"
+
+ gpiodbus_release_request "$request"
+}
+
+#
+# gpiocli set test cases
+#
+
+test_set_value_for_unmanaged_line() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli set foo=active
+ status_is 1
+ num_lines_is 1
+ output_regex_match ".*: Line 'foo' not managed by gpio-manager, must be requested first"
+}
+
+test_set_one_value_with_invalid_arguments() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --output foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli set bar=wrong
+ status_is 1
+ num_lines_is 3
+ output_regex_match ".*: invalid output value: 'wrong'"
+
+ run_prog gpiocli set bar=
+ status_is 1
+ num_lines_is 3
+ output_regex_match ".*: invalid output value: ''"
+
+ run_prog gpiocli set bar
+ status_is 1
+ num_lines_is 3
+ output_regex_match ".*: line must have a single value assigned"
+
+ gpiodbus_release_request "$request"
+}
+
+test_set_one_value_by_name() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --output foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=inactive \"11\"=inactive"
+
+ run_prog gpiocli set bar=active
+ status_is 0
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=active \"11\"=inactive"
+
+ gpiodbus_release_request "$request"
+}
+
+test_set_multiple_values_by_names() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --output foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=inactive \"11\"=inactive"
+
+ run_prog gpiocli set bar=active foo=active xyz=0
+ status_is 0
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=active \"5\"=active \"11\"=inactive"
+
+ gpiodbus_release_request "$request"
+}
+
+test_set_one_value_by_request_and_offset() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --output foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=inactive \"11\"=inactive"
+
+ run_prog gpiocli set -r "$request" 5=1
+ status_is 0
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=active \"11\"=inactive"
+
+ gpiodbus_release_request "$request"
+}
+
+test_set_multiple_values_by_request_and_offsets() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --output foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=inactive \"11\"=inactive"
+
+ run_prog gpiocli set --request="$request" 11=active 5=1 1=0
+ status_is 0
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=active \"11\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+test_set_multiple_values_by_request_names_and_offsets() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ run_prog gpiocli request --output foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=inactive \"11\"=inactive"
+
+ run_prog gpiocli set --request="$request" xyz=active 5=1 foo=0
+ status_is 0
+
+ run_prog gpiocli get --request="$request"
+ status_is 0
+ num_lines_is 1
+ output_is "\"1\"=inactive \"5\"=active \"11\"=active"
+
+ gpiodbus_release_request "$request"
+}
+
+#
+# gpiocli notify test cases
+#
+
+test_notify_print_initial_info_by_name() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --both-edges --clock-realtime --debounce-period=5000 foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_run gpiocli notify foo
+ dut_read
+
+ output_is "$sim0 - 1 (\"foo\"): [input,used,consumer=\"gpio-manager\",both-edges,realtime-clockdebounced,debounce-period=5000,managed,request=\"request0\"]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_notify_print_initial_info_by_chip_and_offset() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --output --open-drain --active-low foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_run gpiocli notify --chip="$sim0" 5
+ dut_read
+
+ output_is "$sim0 - 5 (\"bar\"): [output,used,consumer=\"gpio-manager\",open-drain,active-low,managed,request=\"request0\"]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_notify_print_initial_info_by_chip_name_and_offset_for_multiple_lines() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --output --open-drain --active-low foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_run gpiocli notify --chip="$sim0" 5 foo 11
+
+ dut_read
+ output_regex_match ".*$sim0 - 5 \(\"bar\"\): \[output,used,consumer=\"gpio-manager\",open-drain,active-low,managed,request=\"request0\"\].*"
+ output_regex_match ".*$sim0 - 1 \(\"foo\"\): \[output,used,consumer=\"gpio-manager\",open-drain,active-low,managed,request=\"request0\"\].*"
+ output_regex_match ".*$sim0 - 11 \(\"xyz\"\): \[output,used,consumer=\"gpio-manager\",open-drain,active-low,managed,request=\"request0\"\].*"
+
+ gpiodbus_release_request "$request"
+}
+
+test_notify_request_event() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ dut_run gpiocli notify foo bar
+ dut_flush
+
+ run_prog gpiocli request --output --open-drain --active-low foo bar
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_read
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[active-low=>True\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[drive=>open-drain\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[direction=>output\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[consumer=>\"gpio-manager\"\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[used=>True\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[request=>request0\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[managed=>True\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[request=>request0\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[managed=>True\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[active-low=>True\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[drive=>open-drain\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[direction=>output\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[consumer=>\"gpio-manager\"\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[used=>True\]"
+
+ gpiodbus_release_request "$request"
+}
+
+test_notify_release_event() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ dut_run gpiocli notify foo bar
+
+ run_prog gpiocli request --output --open-drain --active-low foo bar
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_flush
+
+ gpiodbus_release_request "$request"
+
+ dut_read
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[active-low=>False\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[drive=>push-pull\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[consumer=>\"unused\"\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[used=>False\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[request=>N/A\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[managed=>False\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[request=>N/A\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[managed=>False\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[active-low=>False\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[drive=>push-pull\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[consumer=>\"unused\"\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[used=>False\]"
+}
+
+test_notify_reconfigure_event() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ dut_run gpiocli notify foo bar
+
+ run_prog gpiocli request --output --open-drain --active-low foo bar
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_flush
+
+ run_prog gpiocli reconfigure --input --pull-up --rising-edge "$request"
+ status_is 0
+
+ dut_read
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[active-low=>False\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[drive=>push-pull\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[bias=>pull-up\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[edge=>rising\]"
+ output_regex_match "$sim0 - 1 \(\"foo\"\): \[direction=>input\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[active-low=>False\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[drive=>push-pull\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[bias=>pull-up\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[edge=>rising\]"
+ output_regex_match "$sim0 - 5 \(\"bar\"\): \[direction=>input\]"
+
+ gpiodbus_release_request "$request"
+}
+
+#
+# gpiocli monitor test cases
+#
+
+test_monitor_unmanaged_line() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli monitor foo
+
+ output_regex_match ".*: Line must be managed by gpio-manager in order to be monitored"
+}
+
+test_monitor_one_line_by_name() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --both-edges foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_run gpiocli monitor foo
+
+ gpiosim_set_pull sim0 1 pull-up
+
+ dut_read
+ output_regex_match "[0-9]+ rising\\s+\"foo\""
+
+ gpiodbus_release_request "$request"
+}
+
+test_monitor_multiple_lines_by_name() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --both-edges foo bar xyz
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_run gpiocli monitor foo xyz
+
+ gpiosim_set_pull sim0 1 pull-up
+ gpiosim_set_pull sim0 5 pull-up # This should be ignored
+ gpiosim_set_pull sim0 11 pull-up
+ gpiosim_set_pull sim0 1 pull-down
+
+ dut_read
+ output_regex_match "[0-9]+ rising\\s+\"foo\""
+ output_regex_match "[0-9]+ rising\\s+\"xyz\""
+ output_regex_match "[0-9]+ falling\\s+\"foo\""
+
+ gpiodbus_release_request "$request"
+}
+
+test_monitor_one_line_by_request_and_offset() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --both-edges foo
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_run gpiocli monitor --request="$request" 1
+
+ gpiosim_set_pull sim0 1 pull-up
+
+ dut_read
+ output_regex_match "[0-9]+ rising\\s+\"foo\""
+
+ gpiodbus_release_request "$request"
+}
+
+test_monitor_all_lines_on_request() {
+ gpiosim_chip_dbus sim0 num_lines=16 line_name=1:foo line_name=5:bar line_name=11:xyz
+
+ local sim0=${GPIOSIM_CHIP_NAME[sim0]}
+
+ run_prog gpiocli request --input --both-edges --chip="$sim0" foo bar xyz 4
+ status_is 0
+ num_lines_is 1
+ local request=$output
+
+ dut_run gpiocli monitor -r "$request"
+
+ gpiosim_set_pull sim0 1 pull-up
+ gpiosim_set_pull sim0 4 pull-up
+ gpiosim_set_pull sim0 1 pull-down
+
+ dut_read
+ output_regex_match "[0-9]+ rising\\s+\"foo\""
+ output_regex_match "[0-9]+ rising\\s+4"
+ output_regex_match "[0-9]+ falling\\s+\"foo\""
+
+ gpiodbus_release_request "$request"
+}
+
+# shellcheck source=tests/scripts/gpiod-bash-test-helper.inc
+source gpiod-bash-test-helper.inc
+
+check_prog gdbus
+
+# shellcheck source=/dev/null
+source shunit2