@@ -49,6 +49,85 @@ properties:
"#pwm-cells":
const: 3
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ adi,keypad-pins:
+ description: Specifies the pins used for the keypad matrix.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ adi,key-poll-ms:
+ description: Configure time between consecutive scan cycles.
+ enum: [10, 20, 30, 40]
+ default: 10
+
+ adi,unlock-keys:
+ description:
+ Specifies a maximum of 2 keys that can be used to unlock the keypad.
+ If this property is set, the keyboard will be locked and only unlocked
+ after these keys are pressed. The value 127 serves as a wildcard which
+ means any key can be used for unlocking.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
+ - const: 127
+
+ adi,unlock-trigger-sec:
+ description:
+ Defines the time in which the second unlock event must occur after the
+ first unlock event has occurred.
+ maximum: 7
+ default: 0
+
+ adi,reset1-keys:
+ description:
+ Defines the trigger events (key presses) that can generate reset
+ conditions one the reset1 block.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 3
+
+ adi,reset2-keys:
+ description:
+ Defines the trigger events (key presses) that can generate reset
+ conditions one the reset2 block.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 2
+
+ adi,reset1-active-high:
+ description: Sets the reset1 signal as active high.
+ type: boolean
+
+ adi,reset2-active-high:
+ description: Sets the reset2 signal as active high.
+ type: boolean
+
+ adi,rst-passtrough-enable:
+ description: Allows the RST pin to override (OR with) the reset1 signal.
+ type: boolean
+
+ adi,reset-trigger-ms:
+ description:
+ Defines the length of time that the reset events must be active before a
+ reset signal is generated. All events must be active at the same time for
+ the same duration.
+ enum: [0, 1000, 1500, 2000, 2500, 3000, 3500, 4000]
+ default: 0
+
+ adi,reset-pulse-width-us:
+ description: Defines the pulse width of the reset signals.
+ enum: [500, 1000, 2000, 10000]
+ default: 500
+
patternProperties:
"-hog(-[0-9]+)?$":
type: object
@@ -56,11 +135,28 @@ patternProperties:
required:
- gpio-hog
+dependencies:
+ linux,keymap:
+ - adi,keypad-pins
+ - interrupts
+ interrupt-controller:
+ - interrupts
+ adi,unlock-trigger-sec:
+ - adi,unlock-keys
+ adi,reset1-active-high:
+ - adi,reset1-keys
+ adi,rst-passtrough-enable:
+ - adi,reset1-keys
+ adi,reset2-active-high:
+ - adi,reset2-keys
+
required:
- compatible
- reg
allOf:
+ - $ref: /schemas/input/matrix-keymap.yaml#
+ - $ref: /schemas/input/input.yaml#
- if:
properties:
compatible:
@@ -68,7 +164,29 @@ allOf:
const: adi,adp5585-01
then:
properties:
+ adi,unlock-keys: false
+ adi,unlock-trigger-sec: false
gpio-reserved-ranges: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 11
+ items:
+ minimum: 0
+ maximum: 10
+ adi,reset1-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 30
+ - minimum: 37
+ maximum: 47
+ adi,reset2-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 30
+ - minimum: 37
+ maximum: 47
else:
if:
properties:
@@ -81,6 +199,25 @@ allOf:
- adi,adp5585-04
then:
properties:
+ adi,unlock-keys: false
+ adi,unlock-trigger-sec: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 10
+ items:
+ enum: [0, 1, 2, 3, 4, 6, 7, 8, 9, 10]
+ adi,reset1-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 25
+ - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
+ adi,reset2-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 25
+ - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
gpio-reserved-ranges:
maxItems: 1
items:
@@ -90,11 +227,33 @@ allOf:
else:
properties:
gpio-reserved-ranges: false
+ adi,keypad-pins:
+ minItems: 2
+ maxItems: 19
+ items:
+ minimum: 0
+ maximum: 18
+ adi,reset1-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
+ adi,reset2-keys:
+ items:
+ anyOf:
+ - minimum: 1
+ maximum: 88
+ - minimum: 97
+ maximum: 115
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -110,6 +269,33 @@ examples:
gpio-reserved-ranges = <5 1>;
#pwm-cells = <3>;
+
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+
+ adi,reset1-keys = <1 43>;
+ adi,reset2-keys = <2 3>;
+ adi,reset-trigger-ms = <2000>;
+
+ /*
+ * col0, col1, col2
+ * row0, row1, row2
+ */
+ adi,keypad-pins = <0 1 2 6 7 8>;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x00, KEY_1)
+ MATRIX_KEY(0x00, 0x01, KEY_2)
+ MATRIX_KEY(0x00, 0x02, KEY_3)
+
+ MATRIX_KEY(0x01, 0x00, KEY_A)
+ MATRIX_KEY(0x01, 0x01, KEY_B)
+ MATRIX_KEY(0x01, 0x02, KEY_C)
+
+ MATRIX_KEY(0x02, 0x00, BTN_1)
+ MATRIX_KEY(0x02, 0x01, BTN_2)
+ MATRIX_KEY(0x02, 0x02, BTN_3)
+ >;
};
};