diff mbox series

[4/4] pinctrl: lynxpoint: use new GPIO line value setter callbacks

Message ID 20250610-gpiochip-set-rv-pinctrl-intel-v1-4-d7a773ff864e@linaro.org
State New
Headers show
Series pinctrl: intel: use new GPIO line value setter callbacks | expand

Commit Message

Bartosz Golaszewski June 10, 2025, 12:58 p.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/pinctrl/intel/pinctrl-lynxpoint.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pinctrl/intel/pinctrl-lynxpoint.c b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
index ac5459a4c63e054ae4dd975f0a19112e4382aa99..5d4a5dd493d1bfbbc6051163758fd8a9341b43a8 100644
--- a/drivers/pinctrl/intel/pinctrl-lynxpoint.c
+++ b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
@@ -503,7 +503,7 @@  static int lp_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	return !!(ioread32(reg) & IN_LVL_BIT);
 }
 
-static void lp_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+static int lp_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
 {
 	struct intel_pinctrl *lg = gpiochip_get_data(chip);
 	void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
@@ -514,6 +514,8 @@  static void lp_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
 		iowrite32(ioread32(reg) | OUT_LVL_BIT, reg);
 	else
 		iowrite32(ioread32(reg) & ~OUT_LVL_BIT, reg);
+
+	return 0;
 }
 
 static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
@@ -775,7 +777,7 @@  static int lp_gpio_probe(struct platform_device *pdev)
 	gc->direction_input = lp_gpio_direction_input;
 	gc->direction_output = lp_gpio_direction_output;
 	gc->get = lp_gpio_get;
-	gc->set = lp_gpio_set;
+	gc->set_rv = lp_gpio_set;
 	gc->set_config = gpiochip_generic_config;
 	gc->get_direction = lp_gpio_get_direction;
 	gc->base = -1;