mbox series

[V2,0/7] i2c: sprd: Modification of UNISOC Platform I2C Driver

Message ID 20230921085457.32446-1-Huangzheng.Lai@unisoc.com
Headers show
Series i2c: sprd: Modification of UNISOC Platform I2C Driver | expand

Message

Huangzheng Lai Sept. 21, 2023, 8:54 a.m. UTC 
Recently, some bugs have been discovered during use, and patch3
and patch5-7 are bug fixes. Also, this patchset add new features:
patch1 allows I2C to use more frequencies for communication,
patch2 allows I2C to use 'reset framework' for reset, and patch4 allows
I2C controller to dynamically switch frequencies during use.

change in V2
-Using 'I2C' instead of 'IIC' in the patch set.
-Using imperative form in patch subject.
-Use 'switch case' instead of 'else if' in PATCH 1/7.
-Modify if (i2c_dev->rst != NULL) to if (i2c_dev->rst) in PATCH 2/7.
-Modify some dev_err() to dev_warn() or dev_dbg().
-Clear i2c_dev->ack_flag in sprd_i2c_clear_ack() in PATCH 3/7.
-Modify the indentation format of the code in PATCH 4/7.
-Move sprd_i2c_enable() above its caller in PATCH 5/7.
-Remove 'Set I2C_RX_ACK when clear irq' commit.
-Add Fixes tags. 

Huangzheng Lai (7):
  i2c: sprd: Add configurations that support 1Mhz and 3.4Mhz frequencies
  i2c: sprd: Add I2C driver to use 'reset framework' function
  i2c: sprd: Use global variables to record I2C ack/nack status instead
    of local variables
  i2c: sprd: Add I2C controller driver to support dynamic switching of
    400K/1M/3.4M frequency
  i2c: sprd: Configure the enable bit of the I2C controller before each
    transmission initiation
  i2c: sprd: Increase the waiting time for I2C transmission to avoid
    system crash issues
  i2c: sprd: Add I2C_NACK_EN and I2C_TRANS_EN control bits

 drivers/i2c/busses/i2c-sprd.c | 166 ++++++++++++++++++++++------------
 1 file changed, 106 insertions(+), 60 deletions(-)