Toggle navigation
Patchwork
linux-i2c
Patches
Bundles
About this project
Login
Register
Mail settings
Show patches with
: State =
Action Required
| 3680 patches
Series
Submitter
State
any
Action Required
New
Under Review
Accepted
Rejected
RFC
Not Applicable
Changes Requested
Awaiting Upstream
Superseded
Deferred
Search
Archived
No
Yes
Both
Delegate
------
Nobody
andy.doan@linaro.org
andy.doan@linaro.org
Apply
«
1
2
3
4
…
36
37
»
Patch
Series
S/W/F
Date
Submitter
Delegate
State
[4/5] dt-bindings: i2c: Add RTL9300 I2C multiplexer
i2c: RTL9300 support
-
-
-
2024-09-17
Chris Packham
New
[3/5] mips: dts: realtek: Add I2C controllers
i2c: RTL9300 support
-
-
-
2024-09-17
Chris Packham
New
[2/5] i2c: Add driver for the RTL9300 I2C controller
i2c: RTL9300 support
-
-
-
2024-09-17
Chris Packham
New
[1/5] dt-bindings: i2c: Add RTL9300 I2C controller
i2c: RTL9300 support
-
-
-
2024-09-17
Chris Packham
New
[v2,5/5] MAINTAINERS: Add entry for Congatec Board Controller
Congatec Board Controller drivers
-
-
-
2024-09-17
Thomas Richard
New
[v2,2/5] gpio: Congatec Board Controller gpio driver
Congatec Board Controller drivers
-
-
-
2024-09-17
Thomas Richard
New
[v4,8/8] misc: add ge-addon-connector driver
Add support for GE SUNH hot-pluggable connector
-
-
-
2024-09-17
Luca Ceresoli
New
[RFC,v4,7/8] driver core: devlink: do not unblock consumers without any drivers found
Add support for GE SUNH hot-pluggable connector
-
-
-
2024-09-17
Luca Ceresoli
New
[v4,6/8] backlight: led-backlight: add devlink to supplier LEDs
Add support for GE SUNH hot-pluggable connector
-
-
-
2024-09-17
Luca Ceresoli
New
[v4,5/8] i2c: i2c-core-of: follow i2c-parent phandle to probe devices from added nodes
Add support for GE SUNH hot-pluggable connector
-
-
-
2024-09-17
Luca Ceresoli
New
[v4,4/8] drm/bridge: hotplug-bridge: add driver to support hot-pluggable DSI bridges
Add support for GE SUNH hot-pluggable connector
-
-
-
2024-09-17
Luca Ceresoli
New
[v4,3/8] drm/encoder: add drm_encoder_cleanup_from()
Add support for GE SUNH hot-pluggable connector
-
-
-
2024-09-17
Luca Ceresoli
New
[v4,2/8] drm/bridge: allow bridges to be informed about added and removed bridges
Add support for GE SUNH hot-pluggable connector
-
-
-
2024-09-17
Luca Ceresoli
New
[v4,1/8] dt-bindings: connector: add GE SUNH hotplug addon connector
Add support for GE SUNH hot-pluggable connector
-
-
-
2024-09-17
Luca Ceresoli
New
i2c: qcom-geni: Keep comment why interrupts start disabled
i2c: qcom-geni: Keep comment why interrupts start disabled
-
-
-
2024-09-16
Wolfram Sang
New
[v2,11/11] i2c: isch: Convert to kernel-doc
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,10/11] i2c: isch: Prefer to use octal permission
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,09/11] i2c: isch: Don't use "proxy" headers
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,08/11] i2c: isch: Unify the name of the variable to hold an error code
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,07/11] i2c: isch: Use read_poll_timeout()
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,06/11] i2c: isch: Utilize temporary variable to hold device pointer
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,05/11] i2c: isch: switch i2c registration to devm functions
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,04/11] i2c: isch: Use custom private data structure
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,03/11] i2c: isch: Switch to memory mapped IO accessors
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,02/11] i2c: isch: Use string_choices API instead of ternary operator
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v2,01/11] i2c: isch: Pass pointer to struct i2c_adapter down
i2c: isch: Put the driver into shape
-
-
-
2024-09-16
Andy Shevchenko
New
[v5,7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
Introduce initial AMD ASF Controller driver support
-
-
-
2024-09-13
Shyam Sundar S K
New
[v5,6/8] i2c: amd-asf: Add routine to handle the ASF slave process
Introduce initial AMD ASF Controller driver support
-
-
-
2024-09-13
Shyam Sundar S K
New
[v5,3/8] i2c: piix4: Export i2c_piix4 driver functions as library
Introduce initial AMD ASF Controller driver support
-
-
-
2024-09-13
Shyam Sundar S K
New
[GIT,PULL] i2c-host for v6.12
[GIT,PULL] i2c-host for v6.12
-
-
-
2024-09-13
Andi Shyti
New
[v3,5/6] i2c: npcm: use i2c frequency table
i2c: npcm: Bug fixes read/write operation, checkpatch
-
-
-
2024-09-13
Tyrone Ting
New
[GIT,PULL] i2c-host-fixes for v6.11-rc8
[GIT,PULL] i2c-host-fixes for v6.11-rc8
-
-
-
2024-09-13
Andi Shyti
New
[v3,1/2] dt-bindings: i2c: pca954x: Add timeout reset property
[v3,1/2] dt-bindings: i2c: pca954x: Add timeout reset property
-
-
-
2024-09-13
Wojciech Siudy (Nokia)
New
[21/21] MAINTAINERS: add adi sc5xx maintainers
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[20/21] arm64: defconfig: sc598 add minimal changes
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[19/21] arm64: dts: adi: sc598: add device tree
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[18/21] dt-bindings: serial: adi,uart4: add adi,uart4 driver documentation
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[17/21] serial: adi,uart: Add driver for ADI ADSP-SC5xx
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[16/21] dt-bindings: i2c: add i2c/twi driver documentation
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[15/21] i2c: Add driver for ADI ADSP-SC5xx platforms
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[14/21] dt-bindings: pinctrl: adi,adsp-pinctrl: add bindings
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[13/21] pinctrl: Add drivers for ADI ADSP-SC5xx platform
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[12/21] dt-bindings: irqchip: adi,adsp-pint: add binding
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[11/21] irqchip: Add irqchip for ADI ADSP-SC5xx platform
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[10/21] dt-bindings: gpio: adi,adsp-port-gpio: add bindings
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[09/21] gpio: add driver for ADI ADSP-SC5xx platform
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[08/21] dt-bindings: clock: adi,sc5xx-clocks: add bindings
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[07/21] clock: Add driver for ADI ADSP-SC5xx clock
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[06/21] include: dt-binding: clock: add adi clock header file
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[05/21] clock:Add driver for ADI ADSP-SC5xx PLL
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[04/21] dt-bindings: arm64: adi,sc598: Add ADSP-SC598 SoC bindings
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[03/21] dt-bindigs: arm64: adi,sc598 bindings
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[02/21] reset: Add driver for ADI ADSP-SC5xx reset controller
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[01/21] arm64: Add ADI ADSP-SC598 SoC
Adding support of ADI ARMv8 ADSP-SC598 SoC.
-
-
-
2024-09-12
Arturs Artamonovs via B4 Relay
New
[v1,1/1] i2c: synquacer: Fix clock rate retrieval code
[v1,1/1] i2c: synquacer: Fix clock rate retrieval code
-
-
-
2024-09-12
Andy Shevchenko
New
[v2] i2ctransfer: Drop redundant variable arg_idx
[v2] i2ctransfer: Drop redundant variable arg_idx
-
-
-
2024-09-12
Jean Delvare
New
i2c/synquacer: Deal with optional PCLK correctly
i2c/synquacer: Deal with optional PCLK correctly
-
-
-
2024-09-12
Ard Biesheuvel
New
[V4] i2c: imx-lpi2c: add target mode support
[V4] i2c: imx-lpi2c: add target mode support
-
-
-
2024-09-12
Carlos Song
New
[v10] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
[v10] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
-
-
-
2024-09-12
Liu Kimriver/刘金河
New
i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()
i2c: qcom-geni: Use IRQF_NO_AUTOEN flag in request_irq()
-
-
-
2024-09-12
Jinjie Ruan
New
[v4,4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
Introduce initial AMD ASF Controller driver support
-
-
-
2024-09-11
Shyam Sundar S K
New
[V2,3/3] i2c: cadence: Add atomic transfer support for controller version 1.4
[V2,1/3] i2c: cadence: Relocate cdns_i2c_runtime_suspend and cdns_i2c_runtime_resume to facilitat...
-
-
-
2024-09-11
Manikanta Guntupalli
New
[V2,1/3] i2c: cadence: Relocate cdns_i2c_runtime_suspend and cdns_i2c_runtime_resume to facilitate atomic mode
[V2,1/3] i2c: cadence: Relocate cdns_i2c_runtime_suspend and cdns_i2c_runtime_resume to facilitat...
-
-
-
2024-09-11
Manikanta Guntupalli
New
[v3] i2c: aspeed: Update the stop sw state when the bus recovery occurs
[v3] i2c: aspeed: Update the stop sw state when the bus recovery occurs
-
-
-
2024-09-11
Tommy Huang
New
[v7,10/10] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce DT hardware prober
-
-
-
2024-09-11
Chen-Yu Tsai
New
[v7,08/10] i2c: of-prober: Add GPIO support to simple helpers
platform/chrome: Introduce DT hardware prober
-
-
-
2024-09-11
Chen-Yu Tsai
New
[v7,06/10] i2c: Introduce OF component probe function
platform/chrome: Introduce DT hardware prober
-
-
-
2024-09-11
Chen-Yu Tsai
New
[v7,04/10] regulator: Add of_regulator_get_optional() for pure DT regulator lookup
platform/chrome: Introduce DT hardware prober
-
-
-
2024-09-11
Chen-Yu Tsai
New
[v1,2/3] i2c: designware: Propagate firmware node
[v1,1/3] i2c: designware: Uninline i2c_dw_probe()
-
-
-
2024-09-10
Andy Shevchenko
New
[v1,1/3] i2c: designware: Uninline i2c_dw_probe()
[v1,1/3] i2c: designware: Uninline i2c_dw_probe()
-
-
-
2024-09-10
Andy Shevchenko
New
[-next,v3,15/15] hwmon: (nzxt-smart2) Use devm_hid_hw_start_and_open in nzxt_smart2_hid_probe()
HID: convert to devm_hid_hw_start_and_open()
-
-
-
2024-09-10
Li Zetao
New
[-next,v3,12/15] hwmon: (gigabyte_waterforce) Use devm_hid_hw_start_and_open in waterforce_probe()
HID: convert to devm_hid_hw_start_and_open()
-
-
-
2024-09-10
Li Zetao
New
[-next,v3,11/15] hwmon: (corsair-psu) Use devm_hid_hw_start_and_open in corsairpsu_probe()
HID: convert to devm_hid_hw_start_and_open()
-
-
-
2024-09-10
Li Zetao
New
[-next,v3,10/15] hwmon: (corsair-cpro) Use devm_hid_hw_start_and_open in ccp_probe()
HID: convert to devm_hid_hw_start_and_open()
-
-
-
2024-09-10
Li Zetao
New
[-next,v3,08/15] hwmon: (aquacomputer_d5next) Use devm_hid_hw_start_and_open in aqc_probe()
HID: convert to devm_hid_hw_start_and_open()
-
-
-
2024-09-10
Li Zetao
New
[-next,v3,05/15] HID: mcp2221: Use devm_hid_hw_start_and_open in mcp2221_probe()
HID: convert to devm_hid_hw_start_and_open()
-
-
-
2024-09-10
Li Zetao
New
[-next,v3,02/15] HID: cp2112: Use devm_hid_hw_start_and_open in cp2112_probe()
HID: convert to devm_hid_hw_start_and_open()
-
-
-
2024-09-10
Li Zetao
New
[3/3] hwmon: (pmbus/tps25990): add initial support
hwmon: pmbus: add tps25990 efuse support
-
-
-
2024-09-09
Jerome Brunet
New
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
-
-
-
2024-09-08
Christophe JAILLET
New
[v2,4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
Enable shared SE support over I2C
-
-
-
2024-09-06
Mukesh Kumar Savaliya
New
[v2,3/4] soc: qcom: geni-se: Export function geni_se_clks_off()
Enable shared SE support over I2C
-
-
-
2024-09-06
Mukesh Kumar Savaliya
New
[v8,8/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on px30-ringneck
Add tsd,mule-i2c-mux support
-
-
-
2024-09-06
Farouk Bouabid
New
[v8,7/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3588-tiger
Add tsd,mule-i2c-mux support
-
-
-
2024-09-06
Farouk Bouabid
New
[v8,6/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3399-puma
Add tsd,mule-i2c-mux support
-
-
-
2024-09-06
Farouk Bouabid
New
[v8,5/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3588-jaguar
Add tsd,mule-i2c-mux support
-
-
-
2024-09-06
Farouk Bouabid
New
[v8,4/8] hwmon: (amc6821) add support for tsd,mule
Add tsd,mule-i2c-mux support
-
-
-
2024-09-06
Farouk Bouabid
New
[v8,3/8] dt-bindings: hwmon: add support for ti,amc6821
Add tsd,mule-i2c-mux support
-
-
-
2024-09-06
Farouk Bouabid
New
[v8,2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
Add tsd,mule-i2c-mux support
-
-
-
2024-09-06
Farouk Bouabid
New
[v8,1/8] dt-bindings: i2c: add support for tsd,mule-i2c-mux
Add tsd,mule-i2c-mux support
-
-
-
2024-09-06
Farouk Bouabid
New
[v3,5/5] i2c: piix4: Clear remote IRR bit to get successive interrupt
Introduce AMD ASF Controller Support to the i2c-piix4 driver
-
-
-
2024-09-06
Shyam Sundar S K
New
[v3,4/5] i2c: piix4: Adjust the SMBus debug message
Introduce AMD ASF Controller Support to the i2c-piix4 driver
-
-
-
2024-09-06
Shyam Sundar S K
New
[v3,3/5] i2c: piix4: Add ACPI support for ASF SMBus device
Introduce AMD ASF Controller Support to the i2c-piix4 driver
-
-
-
2024-09-06
Shyam Sundar S K
New
[v3,2/5] i2c: piix4: Add i2c_algorithm operations to support AMD ASF with SMBus
Introduce AMD ASF Controller Support to the i2c-piix4 driver
-
-
-
2024-09-06
Shyam Sundar S K
New
[v3,1/5] i2c: piix4: Allow more than two algo selection for SMBus
Introduce AMD ASF Controller Support to the i2c-piix4 driver
-
-
-
2024-09-06
Shyam Sundar S K
New
i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
-
-
-
2024-09-06
Liu Kimriver/刘金河
New
i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
i2c: designware: fix master is holding SCL low while ENABLE bit is disabled
-
-
-
2024-09-06
Liu Kimriver/刘金河
New
[-next,19/19] hwmon: (nzxt-smart2) Use devm_hid_hw_start_and_open in nzxt_smart2_hid_probe()
Untitled series #250102
-
-
-
2024-09-04
Li Zetao
New
[-next,17/19] hwmon: (nzxt-kraken2) Use devm_hid_hw_start_and_open in kraken2_probe()
Untitled series #250102
-
-
-
2024-09-04
Li Zetao
New
[-next,13/19] hwmon: Use devm_hid_hw_start_and_open in rog_ryujin_probe()
Untitled series #250102
-
-
-
2024-09-04
Li Zetao
New
[-next,11/19] HID: wiimote: Use devm_hid_hw_start_and_open in wiimote_hid_probe()
Untitled series #250102
-
-
-
2024-09-04
Li Zetao
New
«
1
2
3
4
…
36
37
»