From patchwork Wed May 27 15:30:43 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 207558 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.7 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C7369C433E0 for ; Wed, 27 May 2020 15:31:18 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 96657208E4 for ; Wed, 27 May 2020 15:31:18 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389748AbgE0PbO (ORCPT ); Wed, 27 May 2020 11:31:14 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:36796 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2389691AbgE0PbD (ORCPT ); Wed, 27 May 2020 11:31:03 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id D0ACE8030839; Wed, 27 May 2020 15:30:55 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id fObZDpLip-RW; Wed, 27 May 2020 18:30:54 +0300 (MSK) From: Serge Semin To: Jarkko Nikula , Wolfram Sang , Andy Shevchenko , Mika Westerberg CC: Serge Semin , Serge Semin , Alexey Malahov , Thomas Bogendoerfer , Rob Herring , , , , Subject: [PATCH v5 08/11] i2c: designware: Convert driver to using regmap API Date: Wed, 27 May 2020 18:30:43 +0300 Message-ID: <20200527153046.6172-9-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20200527153046.6172-1-Sergey.Semin@baikalelectronics.ru> References: <20200527153046.6172-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Sender: linux-i2c-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org Seeing the DW I2C driver is using flags-based accessors with two conditional clauses it would be better to replace them with the regmap API IO methods and to initialize the regmap object with read/write callbacks specific to the controller registers map implementation. This will be also handy for the drivers with non-standard registers mapping (like an embedded into the Baikal-T1 System Controller DW I2C block, which glue-driver is a part of this series). As before the driver tries to detect the mapping setup at probe stage and creates a regmap object accordingly, which will be used by the rest of the code to correctly access the controller registers. In two places it was appropriate to convert the hand-written read-modify-write and read-poll-loop design patterns to the corresponding regmap API ready-to-use methods. Note the regmap IO methods return value is checked only at the probe stage. The rest of the code won't do this because basically we have MMIO-based regmap so non of the read/write methods can fail (this also won't be needed for the Baikal-T1-specific I2C controller). Suggested-by: Andy Shevchenko Signed-off-by: Serge Semin Tested-by: Jarkko Nikula Acked-by: Jarkko Nikula Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Rob Herring Cc: devicetree@vger.kernel.org Cc: linux-mips@vger.kernel.org --- Changelog v5: - Keep alphabetical order of the include statements. - Discard explicit u16-type cast in the dw_reg_write_word() method. --- drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-designware-common.c | 178 +++++++++++++++------ drivers/i2c/busses/i2c-designware-core.h | 22 ++- drivers/i2c/busses/i2c-designware-master.c | 125 ++++++++------- drivers/i2c/busses/i2c-designware-slave.c | 77 ++++----- 5 files changed, 248 insertions(+), 155 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 7cd279c36898..259e2325712a 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -526,6 +526,7 @@ config I2C_DAVINCI config I2C_DESIGNWARE_CORE tristate + select REGMAP config I2C_DESIGNWARE_SLAVE bool "Synopsys DesignWare Slave" diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index ed302342f8db..cff4f69dadda 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -57,66 +58,123 @@ static char *abort_sources[] = { "incorrect slave-transmitter mode configuration", }; -u32 dw_readl(struct dw_i2c_dev *dev, int offset) +static int dw_reg_read(void *context, unsigned int reg, unsigned int *val) { - u32 value; + struct dw_i2c_dev *dev = context; - if (dev->flags & ACCESS_16BIT) - value = readw_relaxed(dev->base + offset) | - (readw_relaxed(dev->base + offset + 2) << 16); - else - value = readl_relaxed(dev->base + offset); + *val = readl_relaxed(dev->base + reg); - if (dev->flags & ACCESS_SWAP) - return swab32(value); - else - return value; + return 0; } -void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) +static int dw_reg_write(void *context, unsigned int reg, unsigned int val) { - if (dev->flags & ACCESS_SWAP) - b = swab32(b); - - if (dev->flags & ACCESS_16BIT) { - writew_relaxed((u16)b, dev->base + offset); - writew_relaxed((u16)(b >> 16), dev->base + offset + 2); - } else { - writel_relaxed(b, dev->base + offset); - } + struct dw_i2c_dev *dev = context; + + writel_relaxed(val, dev->base + reg); + + return 0; +} + +static int dw_reg_read_swab(void *context, unsigned int reg, unsigned int *val) +{ + struct dw_i2c_dev *dev = context; + + *val = swab32(readl_relaxed(dev->base + reg)); + + return 0; +} + +static int dw_reg_write_swab(void *context, unsigned int reg, unsigned int val) +{ + struct dw_i2c_dev *dev = context; + + writel_relaxed(swab32(val), dev->base + reg); + + return 0; +} + +static int dw_reg_read_word(void *context, unsigned int reg, unsigned int *val) +{ + struct dw_i2c_dev *dev = context; + + *val = readw_relaxed(dev->base + reg) | + (readw_relaxed(dev->base + reg + 2) << 16); + + return 0; +} + +static int dw_reg_write_word(void *context, unsigned int reg, unsigned int val) +{ + struct dw_i2c_dev *dev = context; + + writew_relaxed(val, dev->base + reg); + writew_relaxed(val >> 16, dev->base + reg + 2); + + return 0; } /** - * i2c_dw_set_reg_access() - Set register access flags + * i2c_dw_init_regmap() - Initialize registers map * @dev: device private data + * @base: Registers map base address * - * Autodetects needed register access mode and sets access flags accordingly. - * This must be called before doing any other register access. + * Autodetects needed register access mode and creates the regmap with + * corresponding read/write callbacks. This must be called before doing any + * other register access. */ -int i2c_dw_set_reg_access(struct dw_i2c_dev *dev) +int i2c_dw_init_regmap(struct dw_i2c_dev *dev) { + struct regmap_config map_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .disable_locking = true, + .reg_read = dw_reg_read, + .reg_write = dw_reg_write, + .max_register = DW_IC_COMP_TYPE + }; u32 reg; int ret; + /* + * Skip detecting the registers map configuration if the regmap has + * already been provided by a higher code. + */ + if (dev->map) + return 0; + ret = i2c_dw_acquire_lock(dev); if (ret) return ret; - reg = dw_readl(dev, DW_IC_COMP_TYPE); + reg = readl(dev->base + DW_IC_COMP_TYPE); i2c_dw_release_lock(dev); if (reg == swab32(DW_IC_COMP_TYPE_VALUE)) { - /* Configure register endianness access */ - dev->flags |= ACCESS_SWAP; + map_cfg.reg_read = dw_reg_read_swab; + map_cfg.reg_write = dw_reg_write_swab; } else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) { - /* Configure register access mode 16bit */ - dev->flags |= ACCESS_16BIT; + map_cfg.reg_read = dw_reg_read_word; + map_cfg.reg_write = dw_reg_write_word; } else if (reg != DW_IC_COMP_TYPE_VALUE) { dev_err(dev->dev, "Unknown Synopsys component type: 0x%08x\n", reg); return -ENODEV; } + /* + * Note we'll check the return value of the regmap IO accessors only + * at the probe stage. The rest of the code won't do this because + * basically we have MMIO-based regmap so non of the read/write methods + * can fail. + */ + dev->map = devm_regmap_init(dev->dev, NULL, dev, &map_cfg); + if (IS_ERR(dev->map)) { + dev_err(dev->dev, "Failed to init the registers map\n"); + return PTR_ERR(dev->map); + } + return 0; } @@ -327,11 +385,17 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev) return ret; /* Configure SDA Hold Time if required */ - reg = dw_readl(dev, DW_IC_COMP_VERSION); + ret = regmap_read(dev->map, DW_IC_COMP_VERSION, ®); + if (ret) + goto err_release_lock; + if (reg >= DW_IC_SDA_HOLD_MIN_VERS) { if (!dev->sda_hold_time) { /* Keep previous hold time setting if no one set it */ - dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD); + ret = regmap_read(dev->map, DW_IC_SDA_HOLD, + &dev->sda_hold_time); + if (ret) + goto err_release_lock; } /* @@ -355,14 +419,16 @@ int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev) dev->sda_hold_time = 0; } +err_release_lock: i2c_dw_release_lock(dev); - return 0; + return ret; } void __i2c_dw_disable(struct dw_i2c_dev *dev) { int timeout = 100; + u32 status; do { __i2c_dw_disable_nowait(dev); @@ -370,7 +436,8 @@ void __i2c_dw_disable(struct dw_i2c_dev *dev) * The enable status register may be unimplemented, but * in that case this test reads zero and exits the loop. */ - if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == 0) + regmap_read(dev->map, DW_IC_ENABLE_STATUS, &status); + if ((status & 1) == 0) return; /* @@ -449,22 +516,23 @@ void i2c_dw_release_lock(struct dw_i2c_dev *dev) */ int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) { - int timeout = TIMEOUT; + u32 status; + int ret; - while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { - if (timeout <= 0) { - dev_warn(dev->dev, "timeout waiting for bus ready\n"); - i2c_recover_bus(&dev->adapter); + ret = regmap_read_poll_timeout(dev->map, DW_IC_STATUS, status, + !(status & DW_IC_STATUS_ACTIVITY), + 1100, 20000); + if (ret) { + dev_warn(dev->dev, "timeout waiting for bus ready\n"); - if (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) - return -ETIMEDOUT; - return 0; - } - timeout--; - usleep_range(1000, 1100); + i2c_recover_bus(&dev->adapter); + + regmap_read(dev->map, DW_IC_STATUS, &status); + if (!(status & DW_IC_STATUS_ACTIVITY)) + ret = 0; } - return 0; + return ret; } int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) @@ -490,15 +558,19 @@ int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev) return -EIO; } -void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev) +int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev) { u32 param, tx_fifo_depth, rx_fifo_depth; + int ret; /* * Try to detect the FIFO depth if not set by interface driver, * the depth could be from 2 to 256 from HW spec. */ - param = dw_readl(dev, DW_IC_COMP_PARAM_1); + ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, ¶m); + if (ret) + return ret; + tx_fifo_depth = ((param >> 16) & 0xff) + 1; rx_fifo_depth = ((param >> 8) & 0xff) + 1; if (!dev->tx_fifo_depth) { @@ -510,6 +582,8 @@ void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev) dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth, rx_fifo_depth); } + + return 0; } u32 i2c_dw_func(struct i2c_adapter *adap) @@ -521,17 +595,19 @@ u32 i2c_dw_func(struct i2c_adapter *adap) void i2c_dw_disable(struct dw_i2c_dev *dev) { + u32 dummy; + /* Disable controller */ __i2c_dw_disable(dev); /* Disable all interrupts */ - dw_writel(dev, 0, DW_IC_INTR_MASK); - dw_readl(dev, DW_IC_CLR_INTR); + regmap_write(dev->map, DW_IC_INTR_MASK, 0); + regmap_read(dev->map, DW_IC_CLR_INTR, &dummy); } void i2c_dw_disable_int(struct dw_i2c_dev *dev) { - dw_writel(dev, 0, DW_IC_INTR_MASK); + regmap_write(dev->map, DW_IC_INTR_MASK, 0); } MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index b9ef9b0deef0..f5bbe3d6bcf8 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -15,6 +15,7 @@ #include #include #include +#include #include #define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \ @@ -126,8 +127,6 @@ #define STATUS_WRITE_IN_PROGRESS 0x1 #define STATUS_READ_IN_PROGRESS 0x2 -#define TIMEOUT 20 /* ms */ - /* * operation modes */ @@ -183,7 +182,9 @@ struct reset_control; /** * struct dw_i2c_dev - private i2c-designware data * @dev: driver model device node + * @map: IO registers map * @base: IO registers pointer + * @ext: Extended IO registers pointer * @cmd_complete: tx completion indicator * @clk: input reference clock * @pclk: clock required to access the registers @@ -233,6 +234,7 @@ struct reset_control; */ struct dw_i2c_dev { struct device *dev; + struct regmap *map; void __iomem *base; void __iomem *ext; struct completion cmd_complete; @@ -284,17 +286,13 @@ struct dw_i2c_dev { bool suspended; }; -#define ACCESS_SWAP 0x00000001 -#define ACCESS_16BIT 0x00000002 -#define ACCESS_INTR_MASK 0x00000004 -#define ACCESS_NO_IRQ_SUSPEND 0x00000008 +#define ACCESS_INTR_MASK 0x00000001 +#define ACCESS_NO_IRQ_SUSPEND 0x00000002 #define MODEL_MSCC_OCELOT 0x00000100 #define MODEL_MASK 0x00000f00 -u32 dw_readl(struct dw_i2c_dev *dev, int offset); -void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset); -int i2c_dw_set_reg_access(struct dw_i2c_dev *dev); +int i2c_dw_init_regmap(struct dw_i2c_dev *dev); u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev); @@ -304,19 +302,19 @@ int i2c_dw_acquire_lock(struct dw_i2c_dev *dev); void i2c_dw_release_lock(struct dw_i2c_dev *dev); int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); -void i2c_dw_set_fifo_size(struct dw_i2c_dev *dev); +int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev); u32 i2c_dw_func(struct i2c_adapter *adap); void i2c_dw_disable(struct dw_i2c_dev *dev); void i2c_dw_disable_int(struct dw_i2c_dev *dev); static inline void __i2c_dw_enable(struct dw_i2c_dev *dev) { - dw_writel(dev, 1, DW_IC_ENABLE); + regmap_write(dev->map, DW_IC_ENABLE, 1); } static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev) { - dw_writel(dev, 0, DW_IC_ENABLE); + regmap_write(dev->map, DW_IC_ENABLE, 0); } void __i2c_dw_disable(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index 95eeec53c744..2cba21b945d8 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include "i2c-designware-core.h" @@ -25,11 +26,11 @@ static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev) { /* Configure Tx/Rx FIFO threshold levels */ - dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL); - dw_writel(dev, 0, DW_IC_RX_TL); + regmap_write(dev->map, DW_IC_TX_TL, dev->tx_fifo_depth / 2); + regmap_write(dev->map, DW_IC_RX_TL, 0); /* Configure the I2C master */ - dw_writel(dev, dev->master_cfg, DW_IC_CON); + regmap_write(dev->map, DW_IC_CON, dev->master_cfg); } static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) @@ -44,8 +45,11 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) ret = i2c_dw_acquire_lock(dev); if (ret) return ret; - comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1); + + ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, &comp_param1); i2c_dw_release_lock(dev); + if (ret) + return ret; /* Set standard and fast speed dividers for high/low periods */ sda_falling_time = t->sda_fall_ns ?: 300; /* ns */ @@ -187,22 +191,22 @@ static int i2c_dw_init_master(struct dw_i2c_dev *dev) __i2c_dw_disable(dev); /* Write standard speed timing parameters */ - dw_writel(dev, dev->ss_hcnt, DW_IC_SS_SCL_HCNT); - dw_writel(dev, dev->ss_lcnt, DW_IC_SS_SCL_LCNT); + regmap_write(dev->map, DW_IC_SS_SCL_HCNT, dev->ss_hcnt); + regmap_write(dev->map, DW_IC_SS_SCL_LCNT, dev->ss_lcnt); /* Write fast mode/fast mode plus timing parameters */ - dw_writel(dev, dev->fs_hcnt, DW_IC_FS_SCL_HCNT); - dw_writel(dev, dev->fs_lcnt, DW_IC_FS_SCL_LCNT); + regmap_write(dev->map, DW_IC_FS_SCL_HCNT, dev->fs_hcnt); + regmap_write(dev->map, DW_IC_FS_SCL_LCNT, dev->fs_lcnt); /* Write high speed timing parameters if supported */ if (dev->hs_hcnt && dev->hs_lcnt) { - dw_writel(dev, dev->hs_hcnt, DW_IC_HS_SCL_HCNT); - dw_writel(dev, dev->hs_lcnt, DW_IC_HS_SCL_LCNT); + regmap_write(dev->map, DW_IC_HS_SCL_HCNT, dev->hs_hcnt); + regmap_write(dev->map, DW_IC_HS_SCL_LCNT, dev->hs_lcnt); } /* Write SDA hold time if supported */ if (dev->sda_hold_time) - dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD); + regmap_write(dev->map, DW_IC_SDA_HOLD, dev->sda_hold_time); i2c_dw_configure_fifo_master(dev); i2c_dw_release_lock(dev); @@ -213,15 +217,15 @@ static int i2c_dw_init_master(struct dw_i2c_dev *dev) static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) { struct i2c_msg *msgs = dev->msgs; - u32 ic_con, ic_tar = 0; + u32 ic_con = 0, ic_tar = 0; + u32 dummy; /* Disable the adapter */ __i2c_dw_disable(dev); /* If the slave address is ten bit address, enable 10BITADDR */ - ic_con = dw_readl(dev, DW_IC_CON); if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) { - ic_con |= DW_IC_CON_10BITADDR_MASTER; + ic_con = DW_IC_CON_10BITADDR_MASTER; /* * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing * mode has to be enabled via bit 12 of IC_TAR register. @@ -229,17 +233,17 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) * detected from registers. */ ic_tar = DW_IC_TAR_10BITADDR_MASTER; - } else { - ic_con &= ~DW_IC_CON_10BITADDR_MASTER; } - dw_writel(dev, ic_con, DW_IC_CON); + regmap_update_bits(dev->map, DW_IC_CON, DW_IC_CON_10BITADDR_MASTER, + ic_con); /* * Set the slave (target) address and enable 10-bit addressing mode * if applicable. */ - dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR); + regmap_write(dev->map, DW_IC_TAR, + msgs[dev->msg_write_idx].addr | ic_tar); /* Enforce disabled interrupts (due to HW issues) */ i2c_dw_disable_int(dev); @@ -248,11 +252,11 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) __i2c_dw_enable(dev); /* Dummy read to avoid the register getting stuck on Bay Trail */ - dw_readl(dev, DW_IC_ENABLE_STATUS); + regmap_read(dev->map, DW_IC_ENABLE_STATUS, &dummy); /* Clear and enable interrupts */ - dw_readl(dev, DW_IC_CLR_INTR); - dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK); + regmap_read(dev->map, DW_IC_CLR_INTR, &dummy); + regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK); } /* @@ -271,6 +275,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) u32 buf_len = dev->tx_buf_len; u8 *buf = dev->tx_buf; bool need_restart = false; + unsigned int flr; intr_mask = DW_IC_INTR_MASTER_MASK; @@ -303,8 +308,11 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) need_restart = true; } - tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR); - rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR); + regmap_read(dev->map, DW_IC_TXFLR, &flr); + tx_limit = dev->tx_fifo_depth - flr; + + regmap_read(dev->map, DW_IC_RXFLR, &flr); + rx_limit = dev->rx_fifo_depth - flr; while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) { u32 cmd = 0; @@ -337,11 +345,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) if (dev->rx_outstanding >= dev->rx_fifo_depth) break; - dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD); + regmap_write(dev->map, DW_IC_DATA_CMD, + cmd | 0x100); rx_limit--; dev->rx_outstanding++; - } else - dw_writel(dev, cmd | *buf++, DW_IC_DATA_CMD); + } else { + regmap_write(dev->map, DW_IC_DATA_CMD, + cmd | *buf++); + } tx_limit--; buf_len--; } @@ -371,7 +382,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) if (dev->msg_err) intr_mask = 0; - dw_writel(dev, intr_mask, DW_IC_INTR_MASK); + regmap_write(dev->map, DW_IC_INTR_MASK, intr_mask); } static u8 @@ -399,7 +410,7 @@ i2c_dw_read(struct dw_i2c_dev *dev) int rx_valid; for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) { - u32 len; + u32 len, tmp; u8 *buf; if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD)) @@ -413,18 +424,18 @@ i2c_dw_read(struct dw_i2c_dev *dev) buf = dev->rx_buf; } - rx_valid = dw_readl(dev, DW_IC_RXFLR); + regmap_read(dev->map, DW_IC_RXFLR, &rx_valid); for (; len > 0 && rx_valid > 0; len--, rx_valid--) { u32 flags = msgs[dev->msg_read_idx].flags; - *buf = dw_readl(dev, DW_IC_DATA_CMD); + regmap_read(dev->map, DW_IC_DATA_CMD, &tmp); /* Ensure length byte is a valid value */ if (flags & I2C_M_RECV_LEN && - *buf <= I2C_SMBUS_BLOCK_MAX && *buf > 0) { - len = i2c_dw_recv_len(dev, *buf); + tmp <= I2C_SMBUS_BLOCK_MAX && tmp > 0) { + len = i2c_dw_recv_len(dev, tmp); } - buf++; + *buf++ = tmp; dev->rx_outstanding--; } @@ -542,7 +553,7 @@ static const struct i2c_adapter_quirks i2c_dw_quirks = { static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) { - u32 stat; + u32 stat, dummy; /* * The IC_INTR_STAT register just indicates "enabled" interrupts. @@ -550,47 +561,47 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) * in the IC_RAW_INTR_STAT register. * * That is, - * stat = dw_readl(IC_INTR_STAT); + * stat = readl(IC_INTR_STAT); * equals to, - * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK); + * stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK); * * The raw version might be useful for debugging purposes. */ - stat = dw_readl(dev, DW_IC_INTR_STAT); + regmap_read(dev->map, DW_IC_INTR_STAT, &stat); /* * Do not use the IC_CLR_INTR register to clear interrupts, or * you'll miss some interrupts, triggered during the period from - * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR). + * readl(IC_INTR_STAT) to readl(IC_CLR_INTR). * * Instead, use the separately-prepared IC_CLR_* registers. */ if (stat & DW_IC_INTR_RX_UNDER) - dw_readl(dev, DW_IC_CLR_RX_UNDER); + regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy); if (stat & DW_IC_INTR_RX_OVER) - dw_readl(dev, DW_IC_CLR_RX_OVER); + regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy); if (stat & DW_IC_INTR_TX_OVER) - dw_readl(dev, DW_IC_CLR_TX_OVER); + regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy); if (stat & DW_IC_INTR_RD_REQ) - dw_readl(dev, DW_IC_CLR_RD_REQ); + regmap_read(dev->map, DW_IC_CLR_RD_REQ, &dummy); if (stat & DW_IC_INTR_TX_ABRT) { /* * The IC_TX_ABRT_SOURCE register is cleared whenever * the IC_CLR_TX_ABRT is read. Preserve it beforehand. */ - dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE); - dw_readl(dev, DW_IC_CLR_TX_ABRT); + regmap_read(dev->map, DW_IC_TX_ABRT_SOURCE, &dev->abort_source); + regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy); } if (stat & DW_IC_INTR_RX_DONE) - dw_readl(dev, DW_IC_CLR_RX_DONE); + regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy); if (stat & DW_IC_INTR_ACTIVITY) - dw_readl(dev, DW_IC_CLR_ACTIVITY); + regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy); if (stat & DW_IC_INTR_STOP_DET) - dw_readl(dev, DW_IC_CLR_STOP_DET); + regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy); if (stat & DW_IC_INTR_START_DET) - dw_readl(dev, DW_IC_CLR_START_DET); + regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy); if (stat & DW_IC_INTR_GEN_CALL) - dw_readl(dev, DW_IC_CLR_GEN_CALL); + regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy); return stat; } @@ -612,7 +623,7 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev) * Anytime TX_ABRT is set, the contents of the tx/rx * buffers are flushed. Make sure to skip them. */ - dw_writel(dev, 0, DW_IC_INTR_MASK); + regmap_write(dev->map, DW_IC_INTR_MASK, 0); goto tx_aborted; } @@ -633,9 +644,9 @@ static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev) complete(&dev->cmd_complete); else if (unlikely(dev->flags & ACCESS_INTR_MASK)) { /* Workaround to trigger pending interrupt */ - stat = dw_readl(dev, DW_IC_INTR_MASK); + regmap_read(dev->map, DW_IC_INTR_MASK, &stat); i2c_dw_disable_int(dev); - dw_writel(dev, stat, DW_IC_INTR_MASK); + regmap_write(dev->map, DW_IC_INTR_MASK, stat); } return 0; @@ -646,8 +657,8 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) struct dw_i2c_dev *dev = dev_id; u32 stat, enabled; - enabled = dw_readl(dev, DW_IC_ENABLE); - stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); + regmap_read(dev->map, DW_IC_ENABLE, &enabled); + regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &stat); dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat); if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY)) return IRQ_NONE; @@ -739,7 +750,7 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) dev->disable = i2c_dw_disable; dev->disable_int = i2c_dw_disable_int; - ret = i2c_dw_set_reg_access(dev); + ret = i2c_dw_init_regmap(dev); if (ret) return ret; @@ -747,7 +758,9 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) if (ret) return ret; - i2c_dw_set_fifo_size(dev); + ret = i2c_dw_set_fifo_size(dev); + if (ret) + return ret; ret = dev->init(dev); if (ret) diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index 576e7af4e94b..44974b53a626 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -14,18 +14,19 @@ #include #include #include +#include #include "i2c-designware-core.h" static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev) { /* Configure Tx/Rx FIFO threshold levels. */ - dw_writel(dev, 0, DW_IC_TX_TL); - dw_writel(dev, 0, DW_IC_RX_TL); + regmap_write(dev->map, DW_IC_TX_TL, 0); + regmap_write(dev->map, DW_IC_RX_TL, 0); /* Configure the I2C slave. */ - dw_writel(dev, dev->slave_cfg, DW_IC_CON); - dw_writel(dev, DW_IC_INTR_SLAVE_MASK, DW_IC_INTR_MASK); + regmap_write(dev->map, DW_IC_CON, dev->slave_cfg); + regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_SLAVE_MASK); } /** @@ -49,7 +50,7 @@ static int i2c_dw_init_slave(struct dw_i2c_dev *dev) /* Write SDA hold time if supported */ if (dev->sda_hold_time) - dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD); + regmap_write(dev->map, DW_IC_SDA_HOLD, dev->sda_hold_time); i2c_dw_configure_fifo_slave(dev); i2c_dw_release_lock(dev); @@ -72,7 +73,7 @@ static int i2c_dw_reg_slave(struct i2c_client *slave) * the address to which the DW_apb_i2c responds. */ __i2c_dw_disable_nowait(dev); - dw_writel(dev, slave->addr, DW_IC_SAR); + regmap_write(dev->map, DW_IC_SAR, slave->addr); dev->slave = slave; __i2c_dw_enable(dev); @@ -103,7 +104,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave) static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev) { - u32 stat; + u32 stat, dummy; /* * The IC_INTR_STAT register just indicates "enabled" interrupts. @@ -111,39 +112,39 @@ static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev) * in the IC_RAW_INTR_STAT register. * * That is, - * stat = dw_readl(IC_INTR_STAT); + * stat = readl(IC_INTR_STAT); * equals to, - * stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK); + * stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK); * * The raw version might be useful for debugging purposes. */ - stat = dw_readl(dev, DW_IC_INTR_STAT); + regmap_read(dev->map, DW_IC_INTR_STAT, &stat); /* * Do not use the IC_CLR_INTR register to clear interrupts, or * you'll miss some interrupts, triggered during the period from - * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR). + * readl(IC_INTR_STAT) to readl(IC_CLR_INTR). * * Instead, use the separately-prepared IC_CLR_* registers. */ if (stat & DW_IC_INTR_TX_ABRT) - dw_readl(dev, DW_IC_CLR_TX_ABRT); + regmap_read(dev->map, DW_IC_CLR_TX_ABRT, &dummy); if (stat & DW_IC_INTR_RX_UNDER) - dw_readl(dev, DW_IC_CLR_RX_UNDER); + regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &dummy); if (stat & DW_IC_INTR_RX_OVER) - dw_readl(dev, DW_IC_CLR_RX_OVER); + regmap_read(dev->map, DW_IC_CLR_RX_OVER, &dummy); if (stat & DW_IC_INTR_TX_OVER) - dw_readl(dev, DW_IC_CLR_TX_OVER); + regmap_read(dev->map, DW_IC_CLR_TX_OVER, &dummy); if (stat & DW_IC_INTR_RX_DONE) - dw_readl(dev, DW_IC_CLR_RX_DONE); + regmap_read(dev->map, DW_IC_CLR_RX_DONE, &dummy); if (stat & DW_IC_INTR_ACTIVITY) - dw_readl(dev, DW_IC_CLR_ACTIVITY); + regmap_read(dev->map, DW_IC_CLR_ACTIVITY, &dummy); if (stat & DW_IC_INTR_STOP_DET) - dw_readl(dev, DW_IC_CLR_STOP_DET); + regmap_read(dev->map, DW_IC_CLR_STOP_DET, &dummy); if (stat & DW_IC_INTR_START_DET) - dw_readl(dev, DW_IC_CLR_START_DET); + regmap_read(dev->map, DW_IC_CLR_START_DET, &dummy); if (stat & DW_IC_INTR_GEN_CALL) - dw_readl(dev, DW_IC_CLR_GEN_CALL); + regmap_read(dev->map, DW_IC_CLR_GEN_CALL, &dummy); return stat; } @@ -155,14 +156,14 @@ static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev) static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev) { - u32 raw_stat, stat, enabled; - u8 val, slave_activity; + u32 raw_stat, stat, enabled, tmp; + u8 val = 0, slave_activity; - stat = dw_readl(dev, DW_IC_INTR_STAT); - enabled = dw_readl(dev, DW_IC_ENABLE); - raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT); - slave_activity = ((dw_readl(dev, DW_IC_STATUS) & - DW_IC_STATUS_SLAVE_ACTIVITY) >> 6); + regmap_read(dev->map, DW_IC_INTR_STAT, &stat); + regmap_read(dev->map, DW_IC_ENABLE, &enabled); + regmap_read(dev->map, DW_IC_RAW_INTR_STAT, &raw_stat); + regmap_read(dev->map, DW_IC_STATUS, &tmp); + slave_activity = ((tmp & DW_IC_STATUS_SLAVE_ACTIVITY) >> 6); if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY) || !dev->slave) return 0; @@ -177,7 +178,8 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev) if (stat & DW_IC_INTR_RD_REQ) { if (slave_activity) { if (stat & DW_IC_INTR_RX_FULL) { - val = dw_readl(dev, DW_IC_DATA_CMD); + regmap_read(dev->map, DW_IC_DATA_CMD, &tmp); + val = tmp; if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED, @@ -185,24 +187,24 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev) dev_vdbg(dev->dev, "Byte %X acked!", val); } - dw_readl(dev, DW_IC_CLR_RD_REQ); + regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp); stat = i2c_dw_read_clear_intrbits_slave(dev); } else { - dw_readl(dev, DW_IC_CLR_RD_REQ); - dw_readl(dev, DW_IC_CLR_RX_UNDER); + regmap_read(dev->map, DW_IC_CLR_RD_REQ, &tmp); + regmap_read(dev->map, DW_IC_CLR_RX_UNDER, &tmp); stat = i2c_dw_read_clear_intrbits_slave(dev); } if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_REQUESTED, &val)) - dw_writel(dev, val, DW_IC_DATA_CMD); + regmap_write(dev->map, DW_IC_DATA_CMD, val); } } if (stat & DW_IC_INTR_RX_DONE) { if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED, &val)) - dw_readl(dev, DW_IC_CLR_RX_DONE); + regmap_read(dev->map, DW_IC_CLR_RX_DONE, &tmp); i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val); stat = i2c_dw_read_clear_intrbits_slave(dev); @@ -210,7 +212,8 @@ static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev) } if (stat & DW_IC_INTR_RX_FULL) { - val = dw_readl(dev, DW_IC_DATA_CMD); + regmap_read(dev->map, DW_IC_DATA_CMD, &tmp); + val = tmp; if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED, &val)) dev_vdbg(dev->dev, "Byte %X acked!", val); @@ -263,7 +266,7 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev) dev->disable = i2c_dw_disable; dev->disable_int = i2c_dw_disable_int; - ret = i2c_dw_set_reg_access(dev); + ret = i2c_dw_init_regmap(dev); if (ret) return ret; @@ -271,7 +274,9 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev) if (ret) return ret; - i2c_dw_set_fifo_size(dev); + ret = i2c_dw_set_fifo_size(dev); + if (ret) + return ret; ret = dev->init(dev); if (ret)