@@ -2,7 +2,7 @@
/*
* Copyright (C) 2013 STMicroelectronics
*
- * I2C master mode controller driver, used in STMicroelectronics devices.
+ * I2C host controller driver, used in STMicroelectronics devices.
*
* Author: Maxime Coquelin <maxime.coquelin@st.com>
*/
@@ -150,7 +150,7 @@ struct st_i2c_timings {
/**
* struct st_i2c_client - client specific data
- * @addr: 8-bit slave addr, including r/w bit
+ * @addr: 8-bit client addr, including r/w bit
* @count: number of bytes to be transfered
* @xfered: number of bytes already transferred
* @buf: data buffer
@@ -647,7 +647,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
{
struct st_i2c_client *c = &i2c_dev->client;
u32 ctl, i2c, it;
- unsigned long timeout;
+ unsigned long time_left;
int ret;
c->addr = i2c_8bit_addr_from_msg(msg);
@@ -667,7 +667,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
i2c |= SSC_I2C_ACKG;
st_i2c_set_bits(i2c_dev->base + SSC_I2C, i2c);
- /* Write slave address */
+ /* Write client address */
st_i2c_write_tx_fifo(i2c_dev, c->addr);
/* Pre-fill Tx fifo with data in case of write */
@@ -685,15 +685,12 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STRTG);
}
- timeout = wait_for_completion_timeout(&i2c_dev->complete,
+ time_left = wait_for_completion_timeout(&i2c_dev->complete,
i2c_dev->adap.timeout);
ret = c->result;
- if (!timeout) {
- dev_err(i2c_dev->dev, "Write to slave 0x%x timed out\n",
- c->addr);
+ if (!time_left)
ret = -ETIMEDOUT;
- }
i2c = SSC_I2C_STOPG | SSC_I2C_REPSTRTG;
st_i2c_clr_bits(i2c_dev->base + SSC_I2C, i2c);
@@ -769,7 +766,7 @@ static u32 st_i2c_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm st_i2c_algo = {
- .master_xfer = st_i2c_xfer,
+ .xfer = st_i2c_xfer,
.functionality = st_i2c_func,
};
Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C specifications and replace "master/slave" with more appropriate terms. They are also more specific because we distinguish now between a remote entity ("client") and a local one ("target"). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/busses/i2c-st.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-)